All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antti Palosaari <crope@iki.fi>
To: Ole Ernst <olebowle@gmx.com>, linux-media@vger.kernel.org
Cc: nibble.max@gmail.com, olli.salonen@iki.fi
Subject: Re: cx23885: DVBSky S952 dvb_register failed err = -22
Date: Sun, 15 Mar 2015 12:49:22 +0200	[thread overview]
Message-ID: <550563B2.9010306@iki.fi> (raw)
In-Reply-To: <55055E66.6040600@gmx.com>

You don't have m88ts2022 driver installed.

Antti

On 03/15/2015 12:26 PM, Ole Ernst wrote:
> Hi,
>
> I added some printk in cx23885-dvb.c and the problem is in
> i2c_new_device:
> https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/tree/drivers/media/pci/cx23885/cx23885-dvb.c?id=refs/tags/v3.19.1#n1935
>
> The returned client_tuner is not NULL, but client_tuner->dev.driver is.
> Hence it will goto frontend_detach, which will then return -EINVAL. Any
> idea why client_tuner->dev.driver is NULL?
>
> Thanks,
> Ole
>
> Am 14.03.2015 um 20:54 schrieb Ole Ernst:
>> Hi,
>>
>> using linux-3.19.1-1 (Archlinux) I get the following output while
>> booting without the media-build-tree provided by DVBSky:
>>
>> cx23885 driver version 0.0.4 loaded
>> cx23885 0000:04:00.0: enabling device (0000 -> 0002)
>> CORE cx23885[0]: subsystem: 4254:0952, board: DVBSky S952
>> [card=50,autodetected]
>> cx25840 3-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
>> cx25840 3-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
>> cx23885_dvb_register() allocating 1 frontend(s)
>> cx23885[0]: cx23885 based dvb card
>> i2c i2c-2: m88ds3103_attach: chip_id=70
>> i2c i2c-2: Added multiplexed i2c bus 4
>> cx23885_dvb_register() dvb_register failed err = -22
>> cx23885_dev_setup() Failed to register dvb adapters on VID_B
>> cx23885_dvb_register() allocating 1 frontend(s)
>> cx23885[0]: cx23885 based dvb card
>> i2c i2c-1: m88ds3103_attach: chip_id=70
>> i2c i2c-1: Added multiplexed i2c bus 4
>> cx23885_dvb_register() dvb_register failed err = -22
>> cx23885_dev_setup() Failed to register dvb on VID_C
>> cx23885_dev_checkrevision() Hardware revision = 0xa5
>> cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 17, latency: 0, mmio:
>> 0xf7200000
>>
>> Obviously there are no device in /dev/dvb. Using the media-build-tree
>> works just fine though. The following firmware files are installed in
>> /usr/lib/firmware:
>> dvb-demod-m88ds3103.fw
>> dvb-demod-m88rs6000.fw
>> dvb-demod-si2168-a20-01.fw
>> dvb-demod-si2168-a30-01.fw
>> dvb-demod-si2168-b40-01.fw
>> dvb-fe-ds300x.fw
>> dvb-fe-ds3103.fw
>> dvb-fe-rs6000.fw
>> dvb-tuner-si2158-a20-01.fw
>>
>> Output of lspci -vvvnn:
>> https://gist.githubusercontent.com/olebowle/6a4108363a9d1f7dd033/raw/lscpi
>>
>> I also set the module parameters debug, i2c_debug, irq_debug and
>> irq_debug in cx23885.
>> The output is pretty verbose and can be found here:
>> https://gist.githubusercontent.com/olebowle/6a4108363a9d1f7dd033/raw/debug.log
>>
>> Thanks,
>> Ole
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>

-- 
http://palosaari.fi/

  reply	other threads:[~2015-03-15 10:49 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-14 19:54 cx23885: DVBSky S952 dvb_register failed err = -22 Ole Ernst
2015-03-15 10:26 ` Ole Ernst
2015-03-15 10:49   ` Antti Palosaari [this message]
2015-03-15 11:07     ` Ole Ernst
2015-03-17  1:53     ` Nibble Max
2015-03-17 18:32       ` Ole Ernst
2015-03-18  1:40       ` Nibble Max
2015-03-18  9:06         ` Ole Ernst
2015-03-23 18:08           ` Antti Palosaari
2015-03-23 21:12             ` Ole Ernst
2015-03-23 22:52               ` Antti Palosaari
2015-03-24 12:25                 ` Ole Ernst
2015-03-24 12:54                   ` Antti Palosaari
2015-03-24 14:52                     ` Ole Ernst
2015-03-24 15:22                       ` Antti Palosaari
2015-03-24 19:51                         ` Ole Ernst
2015-03-27 17:24                           ` Ole Ernst
2015-03-27 17:46                             ` Antti Palosaari

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=550563B2.9010306@iki.fi \
    --to=crope@iki.fi \
    --cc=linux-media@vger.kernel.org \
    --cc=nibble.max@gmail.com \
    --cc=olebowle@gmx.com \
    --cc=olli.salonen@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.