[U-Boot] [PATCH 6/7] ARM: bcm283x: merge BCM2835/BCM2836 directories into mach-bcm283x

[Stephen Warren <swarren@nvidia.com>]

On 03/16/2015 09:51 PM, Masahiro Yamada wrote:
> Hi Stephen,
> 
> 
> 
> 2015-03-17 12:39 GMT+09:00 Stephen Warren <swarren@nvidia.com>:
>> On 03/16/2015 04:35 AM, Masahiro Yamada wrote:
>>> BCM2835 (used on Raspberry Pi) and BCM2836 (used on Raspberry Pi 2)
>>> are similar enough.  One of the biggest differences is the ARM
>>> processor.  It is reasonable to collect the source files into a
>>> single place, arch/arm/mach-bcm283x/.
>>
>>> diff --git a/arch/arm/cpu/arm1176/bcm2835/Makefile b/arch/arm/mach-bcm283x/Makefile
>>
>>> -obj-y        := lowlevel_init.o
>>> +obj-$(CONFIG_TARGET_RPI) += lowlevel_init.o
>>>  obj-y        += init.o reset.o timer.o mbox.o
>>
>> Why is only one file conditional; shouldn't they all be either -y or
>> -$(CONFIG_TARGET_RPI)?
> 
> This patch just moves source files, not changing the behavior.
> 
> If you see arch/arm/cpu/armv7/bcm2835/Makefile (it is added by you),
> 
> --------------->8------------------
> src_dir := ../../arm1176/bcm2835/
> 
> obj-y   :=
> obj-y   += $(src_dir)/init.o
> obj-y   += $(src_dir)/reset.o
> obj-y   += $(src_dir)/timer.o
> obj-y   += $(src_dir)/mbox.o
> --------------8<------------------
> 
> 
> BCM2836 borrows source files from BCM2835, except lowlevel_init.S.
> 
> I intended to reflect the same behavior.
> 
> Anyway, lowlevel_init is not linked for Raspberry Pi2
> because you added CONFIG_SKIP_LOWLEVEL_INIT to include/configs/rpi_2.h

OK, that makes sense. But, shouldn't the bcm2835-specific file be left
in its existing location rather than putting it into a common location
when it isn't common?