[U-Boot] [PATCH 2/2] sunxi: Ainol AW1 support

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 15-03-15 18:29, Paul Kocialkowski wrote:
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> ---
>   board/sunxi/MAINTAINERS     |  5 +++++
>   configs/Ainol_AW1_defconfig | 16 ++++++++++++++++
>   2 files changed, 21 insertions(+)
>   create mode 100644 configs/Ainol_AW1_defconfig
>
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index ef3c937..e486458 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -50,6 +50,11 @@ S:	Maintained
>   F:	board/sunxi/dram_a20_olinuxino_l2.c
>   F:	configs/A20-OLinuXino-Lime2_defconfig
>
> +AINOL AW1 BOARD
> +M:	Paul Kocialkowski <contact@paulk.fr>
> +S:	Maintained
> +F:	configs/Ainol_AW1_defconfig
> +
>   AMPE A76 BOARD
>   M:	Paul Kocialkowski <contact@paulk.fr>
>   S:	Maintained
> diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
> new file mode 100644
> index 0000000..e37e6c8
> --- /dev/null
> +++ b/configs/Ainol_AW1_defconfig
> @@ -0,0 +1,16 @@
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
> +CONFIG_FDTFILE="sun7i-a20-ainol-aw1.dtb"
> +CONFIG_USB_MUSB_SUNXI=y
> +CONFIG_USB0_VBUS_PIN="PB9"
> +CONFIG_USB0_VBUS_DET="axp_vbus_detect"
> +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:40000,le:87,ri:112,up:38,lo:141,hs:1,vs:1,sync:3,vmode:0"
> +CONFIG_VIDEO_LCD_POWER="PH8"
> +CONFIG_VIDEO_LCD_BL_EN="PH7"
> +CONFIG_VIDEO_LCD_BL_PWM="PB2"
> ++S:CONFIG_ARM=y
> ++S:CONFIG_ARCH_SUNXI=y
> ++S:CONFIG_MACH_SUN7I=y
> ++S:CONFIG_DRAM_CLK=432
> ++S:CONFIG_DRAM_ZQ=123
> ++S:CONFIG_DRAM_EMR1=4
>

Thanks for the patch, looks good, but needs adjustment for the discussed
changes to treat axp vbus-detect / vbus-enable as regular gpios.

Also we no longer use the +S: magic in defconfig files as there now is a
single .config for both the SPL and regular u-boot builds, so when you
resubmit together with the axp cleanups, please remove the +S: prefixes.

Regards,

Hans