All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 7/7] sunxi: Ainol AW1 support
Date: Mon, 23 Mar 2015 11:57:22 +0100	[thread overview]
Message-ID: <550FF192.1020002@redhat.com> (raw)
In-Reply-To: <CAGb2v67x92iiWp5E-EsznzuDdi2rvDeAtmisgtX6a5FH0AJ-dQ@mail.gmail.com>

Hi,

On 23-03-15 08:09, Chen-Yu Tsai wrote:
> Hi,
>
> On Mon, Mar 23, 2015 at 1:07 AM, Paul Kocialkowski <contact@paulk.fr> wrote:
>
> Maybe a slight description of the board/device?

Yes please, note no need to send a new version if you reply
with a short description I can add that while merging these.

This version of the patch-set looks good, so I plan to merge it
as is (assuming tests on the a23 tablet I've turn out ok).

Not sure yet when exactly I will get around to merging this,
that should happen sometime during this week.

Regards,

Hans




>
> ChenYu
>
>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
>> ---
>>   board/sunxi/MAINTAINERS     |  5 +++++
>>   configs/Ainol_AW1_defconfig | 16 ++++++++++++++++
>>   2 files changed, 21 insertions(+)
>>   create mode 100644 configs/Ainol_AW1_defconfig
>>
>> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
>> index ef3c937..e486458 100644
>> --- a/board/sunxi/MAINTAINERS
>> +++ b/board/sunxi/MAINTAINERS
>> @@ -50,6 +50,11 @@ S:   Maintained
>>   F:     board/sunxi/dram_a20_olinuxino_l2.c
>>   F:     configs/A20-OLinuXino-Lime2_defconfig
>>
>> +AINOL AW1 BOARD
>> +M:     Paul Kocialkowski <contact@paulk.fr>
>> +S:     Maintained
>> +F:     configs/Ainol_AW1_defconfig
>> +
>>   AMPE A76 BOARD
>>   M:     Paul Kocialkowski <contact@paulk.fr>
>>   S:     Maintained
>> diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
>> new file mode 100644
>> index 0000000..1c3b942
>> --- /dev/null
>> +++ b/configs/Ainol_AW1_defconfig
>> @@ -0,0 +1,16 @@
>> +CONFIG_SPL=y
>> +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
>> +CONFIG_FDTFILE="sun7i-a20-ainol-aw1.dtb"
>> +CONFIG_USB_MUSB_SUNXI=y
>> +CONFIG_USB0_VBUS_PIN="PB9"
>> +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
>> +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:40000,le:87,ri:112,up:38,lo:141,hs:1,vs:1,sync:3,vmode:0"
>> +CONFIG_VIDEO_LCD_POWER="PH8"
>> +CONFIG_VIDEO_LCD_BL_EN="PH7"
>> +CONFIG_VIDEO_LCD_BL_PWM="PB2"
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_SUNXI=y
>> +CONFIG_MACH_SUN7I=y
>> +CONFIG_DRAM_CLK=432
>> +CONFIG_DRAM_ZQ=123
>> +CONFIG_DRAM_EMR1=4
>> --
>> 1.9.1
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>

  reply	other threads:[~2015-03-23 10:57 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-22 17:07 [U-Boot] [PATCH v2 1/7] sunxi: gpio: Indentation fix Paul Kocialkowski
2015-03-22 17:07 ` [U-Boot] [PATCH v2 2/7] power: axp221: Virtual VBUS detect and enable GPIOs to replace separate logic Paul Kocialkowski
2015-03-22 17:07 ` [U-Boot] [PATCH v2 3/7] sunxi: usb: Drop AXP-sepcific VBUS detection and drive logic Paul Kocialkowski
2015-03-22 17:07 ` [U-Boot] [PATCH v2 4/7] power: axp209: VBUS detection support Paul Kocialkowski
2015-03-22 17:07 ` [U-Boot] [PATCH v2 5/7] sunxi: common VBUS detection logic in usbc Paul Kocialkowski
2015-03-22 17:07 ` [U-Boot] [PATCH v2 6/7] sunxi: USB download gadget cable detection Paul Kocialkowski
2015-03-22 17:07 ` [U-Boot] [PATCH v2 7/7] sunxi: Ainol AW1 support Paul Kocialkowski
2015-03-23  7:09   ` Chen-Yu Tsai
2015-03-23 10:57     ` Hans de Goede [this message]
2015-03-23 14:25     ` Hans de Goede
2015-03-23 16:25       ` Paul Kocialkowski
2015-03-23 16:21 ` [U-Boot] [PATCH v2 1/7] sunxi: gpio: Indentation fix Hans de Goede
2015-03-23 16:26   ` Paul Kocialkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=550FF192.1020002@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.