diff for duplicates of <551333DA.6080700@ti.com> diff --git a/a/1.txt b/N1/1.txt index f48a1ab..1d8ff6e 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -5,9 +5,9 @@ On Saturday 21 March 2015 02:55 AM, Arun Ramamurthy wrote: > three separate phys. One of the phs (port 2) is also connectd to > a usb 2.0 device controller > -> Reviewed-by: Ray Jui <rjui@broadcom.com> -> Reviewed-by: Scott Branden <sbranden@broadcom.com> -> Signed-off-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com> +> Reviewed-by: Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> +> Reviewed-by: Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> +> Signed-off-by: Arun Ramamurthy <arun.ramamurthy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> > > --- > .../bindings/phy/brcm,cygnus-usb-phy.txt | 65 ++++++++++++++++++++++ @@ -35,7 +35,7 @@ where is #phy-cells documented? > +NOTE: port 0 and port 1 are host only and port 2 can be configured for host or device. > + > +Example of phy : -> + usbphy0: usbphy at 0x0301c000 { +> + usbphy0: usbphy@0x0301c000 { > + compatible = "brcm,cygnus-usb-phy"; > + reg = <0x0301c000 0x2000>, > + <0x18115000 0x1000>, @@ -44,20 +44,20 @@ where is #phy-cells documented? > + > + #address-cells = <1>; > + #size-cells = <0>; -> + usbphy0_0: usbphy0 at 0 { +> + usbphy0_0: usbphy0@0 { > + #phy-cells = <1>; > + reg = <0>; > + status = "okay"; > + phy-supply = <&vbus_p0>; > + }; > + -> + usbphy0_1: usbphy0 at 1 { +> + usbphy0_1: usbphy0@1 { > + #phy-cells = <1>; > + reg = <1>; > + status = "okay"; > + }; > + -> + usbphy0_2: usbphy0 at 2 { +> + usbphy0_2: usbphy0@2 { > + #phy-cells = <1>; > + reg = <2>; > + status = "okay"; @@ -69,7 +69,7 @@ where is #phy-cells documented? > + > + /* This nodes declares all three ports as host */ > + -> + ehci0: usb at 0x18048000 { +> + ehci0: usb@0x18048000 { > + compatible = "generic-ehci"; > + reg = <0x18048000 0x100>; > + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; @@ -87,3 +87,7 @@ please use standard multi-line comment format. Thanks Kishon +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 0c2c19a..9cf1250 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,9 +1,25 @@ "ref\01426886727-537-1-git-send-email-arun.ramamurthy@broadcom.com\0" "ref\01426886727-537-3-git-send-email-arun.ramamurthy@broadcom.com\0" - "From\0kishon@ti.com (Kishon Vijay Abraham I)\0" - "Subject\0[PATCH v1 2/3] Phy: DT binding documentation for Broadcom Cygnus USB PHY driver\0" + "ref\01426886727-537-3-git-send-email-arun.ramamurthy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org\0" + "From\0Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>\0" + "Subject\0Re: [PATCH v1 2/3] Phy: DT binding documentation for Broadcom Cygnus USB PHY driver\0" "Date\0Thu, 26 Mar 2015 03:46:58 +0530\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Arun Ramamurthy <arun.ramamurthy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>" + Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> + Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> + Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> + Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> + Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> + Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org> + " devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\0" + "Cc\0linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" + bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + Dmitry Torokhov <dtor-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org> + Anatol Pomazau <anatol-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org> + Jonathan Richardson <jonathar-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> + Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> + " Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>\0" "\00:1\0" "b\0" "Hi,\n" @@ -13,9 +29,9 @@ "> three separate phys. One of the phs (port 2) is also connectd to\n" "> a usb 2.0 device controller\n" "> \n" - "> Reviewed-by: Ray Jui <rjui@broadcom.com>\n" - "> Reviewed-by: Scott Branden <sbranden@broadcom.com>\n" - "> Signed-off-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>\n" + "> Reviewed-by: Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>\n" + "> Reviewed-by: Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>\n" + "> Signed-off-by: Arun Ramamurthy <arun.ramamurthy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>\n" "> \n" "> ---\n" "> .../bindings/phy/brcm,cygnus-usb-phy.txt | 65 ++++++++++++++++++++++\n" @@ -43,7 +59,7 @@ "> +NOTE: port 0 and port 1 are host only and port 2 can be configured for host or device.\n" "> +\n" "> +Example of phy :\n" - "> +\tusbphy0: usbphy at 0x0301c000 {\n" + "> +\tusbphy0: usbphy@0x0301c000 {\n" "> +\t\tcompatible = \"brcm,cygnus-usb-phy\";\n" "> +\t\treg = <0x0301c000 0x2000>,\n" "> +\t\t <0x18115000 0x1000>,\n" @@ -52,20 +68,20 @@ "> +\n" "> +\t\t#address-cells = <1>;\n" "> +\t\t#size-cells = <0>;\n" - "> +\t\tusbphy0_0: usbphy0 at 0 {\n" + "> +\t\tusbphy0_0: usbphy0@0 {\n" "> +\t\t\t#phy-cells = <1>;\n" "> +\t\t\treg = <0>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t\tphy-supply = <&vbus_p0>;\n" "> +\t\t};\n" "> +\n" - "> +\t\tusbphy0_1: usbphy0 at 1 {\n" + "> +\t\tusbphy0_1: usbphy0@1 {\n" "> +\t\t\t#phy-cells = <1>;\n" "> +\t\t\treg = <1>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tusbphy0_2: usbphy0 at 2 {\n" + "> +\t\tusbphy0_2: usbphy0@2 {\n" "> +\t\t\t#phy-cells = <1>;\n" "> +\t\t\treg = <2>;\n" "> +\t\t\tstatus = \"okay\";\n" @@ -77,7 +93,7 @@ "> +\n" "> +\t/* This nodes declares all three ports as host */\n" "> +\t\n" - "> +\tehci0: usb at 0x18048000 {\n" + "> +\tehci0: usb@0x18048000 {\n" "> +\t\tcompatible = \"generic-ehci\";\n" "> +\t\treg = <0x18048000 0x100>;\n" "> +\t\tinterrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -94,6 +110,10 @@ "please use standard multi-line comment format.\n" "\n" "Thanks\n" - Kishon + "Kishon\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -c05085f9e2de9b6c10217e2e7e44e15554bd4cd14a204034b3305eeca1e54c74 +a0794d5411067f45a3d098263da1e111df3a6fd22a16676c5839c5e1a56c38b2
diff --git a/a/1.txt b/N2/1.txt index f48a1ab..1a8ea18 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -35,7 +35,7 @@ where is #phy-cells documented? > +NOTE: port 0 and port 1 are host only and port 2 can be configured for host or device. > + > +Example of phy : -> + usbphy0: usbphy at 0x0301c000 { +> + usbphy0: usbphy@0x0301c000 { > + compatible = "brcm,cygnus-usb-phy"; > + reg = <0x0301c000 0x2000>, > + <0x18115000 0x1000>, @@ -44,20 +44,20 @@ where is #phy-cells documented? > + > + #address-cells = <1>; > + #size-cells = <0>; -> + usbphy0_0: usbphy0 at 0 { +> + usbphy0_0: usbphy0@0 { > + #phy-cells = <1>; > + reg = <0>; > + status = "okay"; > + phy-supply = <&vbus_p0>; > + }; > + -> + usbphy0_1: usbphy0 at 1 { +> + usbphy0_1: usbphy0@1 { > + #phy-cells = <1>; > + reg = <1>; > + status = "okay"; > + }; > + -> + usbphy0_2: usbphy0 at 2 { +> + usbphy0_2: usbphy0@2 { > + #phy-cells = <1>; > + reg = <2>; > + status = "okay"; @@ -69,7 +69,7 @@ where is #phy-cells documented? > + > + /* This nodes declares all three ports as host */ > + -> + ehci0: usb at 0x18048000 { +> + ehci0: usb@0x18048000 { > + compatible = "generic-ehci"; > + reg = <0x18048000 0x100>; > + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; diff --git a/a/content_digest b/N2/content_digest index 0c2c19a..a062b3c 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,9 +1,24 @@ "ref\01426886727-537-1-git-send-email-arun.ramamurthy@broadcom.com\0" "ref\01426886727-537-3-git-send-email-arun.ramamurthy@broadcom.com\0" - "From\0kishon@ti.com (Kishon Vijay Abraham I)\0" - "Subject\0[PATCH v1 2/3] Phy: DT binding documentation for Broadcom Cygnus USB PHY driver\0" + "From\0Kishon Vijay Abraham I <kishon@ti.com>\0" + "Subject\0Re: [PATCH v1 2/3] Phy: DT binding documentation for Broadcom Cygnus USB PHY driver\0" "Date\0Thu, 26 Mar 2015 03:46:58 +0530\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Arun Ramamurthy <arun.ramamurthy@broadcom.com>" + Rob Herring <robh+dt@kernel.org> + Pawel Moll <pawel.moll@arm.com> + Mark Rutland <mark.rutland@arm.com> + Ian Campbell <ijc+devicetree@hellion.org.uk> + Kumar Gala <galak@codeaurora.org> + Arnd Bergmann <arnd@arndb.de> + " <devicetree@vger.kernel.org>\0" + "Cc\0<linux-arm-kernel@lists.infradead.org>" + <bcm-kernel-feedback-list@broadcom.com> + <linux-kernel@vger.kernel.org> + Dmitry Torokhov <dtor@google.com> + Anatol Pomazau <anatol@google.com> + Jonathan Richardson <jonathar@broadcom.com> + Scott Branden <sbranden@broadcom.com> + " Ray Jui <rjui@broadcom.com>\0" "\00:1\0" "b\0" "Hi,\n" @@ -43,7 +58,7 @@ "> +NOTE: port 0 and port 1 are host only and port 2 can be configured for host or device.\n" "> +\n" "> +Example of phy :\n" - "> +\tusbphy0: usbphy at 0x0301c000 {\n" + "> +\tusbphy0: usbphy@0x0301c000 {\n" "> +\t\tcompatible = \"brcm,cygnus-usb-phy\";\n" "> +\t\treg = <0x0301c000 0x2000>,\n" "> +\t\t <0x18115000 0x1000>,\n" @@ -52,20 +67,20 @@ "> +\n" "> +\t\t#address-cells = <1>;\n" "> +\t\t#size-cells = <0>;\n" - "> +\t\tusbphy0_0: usbphy0 at 0 {\n" + "> +\t\tusbphy0_0: usbphy0@0 {\n" "> +\t\t\t#phy-cells = <1>;\n" "> +\t\t\treg = <0>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t\tphy-supply = <&vbus_p0>;\n" "> +\t\t};\n" "> +\n" - "> +\t\tusbphy0_1: usbphy0 at 1 {\n" + "> +\t\tusbphy0_1: usbphy0@1 {\n" "> +\t\t\t#phy-cells = <1>;\n" "> +\t\t\treg = <1>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tusbphy0_2: usbphy0 at 2 {\n" + "> +\t\tusbphy0_2: usbphy0@2 {\n" "> +\t\t\t#phy-cells = <1>;\n" "> +\t\t\treg = <2>;\n" "> +\t\t\tstatus = \"okay\";\n" @@ -77,7 +92,7 @@ "> +\n" "> +\t/* This nodes declares all three ports as host */\n" "> +\t\n" - "> +\tehci0: usb at 0x18048000 {\n" + "> +\tehci0: usb@0x18048000 {\n" "> +\t\tcompatible = \"generic-ehci\";\n" "> +\t\treg = <0x18048000 0x100>;\n" "> +\t\tinterrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -96,4 +111,4 @@ "Thanks\n" Kishon -c05085f9e2de9b6c10217e2e7e44e15554bd4cd14a204034b3305eeca1e54c74 +9e6e5bb34f7e254866fde887230ec83f0ab8aae3470cafd3d0f173cd235caf96
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.