From: "Andreas Bießmann" <andreas.devel@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/6] ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h
Date: Sun, 29 Mar 2015 22:52:52 +0200 [thread overview]
Message-ID: <55186624.8060804@googlemail.com> (raw)
In-Reply-To: <1416394985-10657-3-git-send-email-josh.wu@atmel.com>
Hi Josh,
sorry for beeing late. I'd like to apply this one but it does not
cleanly. Could you please rebase on current master?
Andreas
On 19.11.14 12:03, Josh Wu wrote:
> Create a new configuration file: at91-sama5_common.h. Which include the
> configurations that reused by all SAMA5 chips.
>
> In the command header, we add the CMD_SETEXPR.
>
> NOTE: NOR flash definition should be put before including the common header.
>
> Signed-off-by: Josh Wu <josh.wu@atmel.com>
> ---
> include/configs/at91-sama5_common.h | 87 +++++++++++++++++++++++++++++++++++++
> include/configs/sama5d3_xplained.h | 77 ++------------------------------
> include/configs/sama5d3xek.h | 83 +++--------------------------------
> include/configs/sama5d4_xplained.h | 74 ++-----------------------------
> include/configs/sama5d4ek.h | 75 ++------------------------------
> 5 files changed, 103 insertions(+), 293 deletions(-)
> create mode 100644 include/configs/at91-sama5_common.h
>
> diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h
> new file mode 100644
> index 0000000..4fab41d
> --- /dev/null
> +++ b/include/configs/at91-sama5_common.h
> @@ -0,0 +1,87 @@
> +/*
> + * Common part of configuration settings for the SAMA5 board.
> + *
> + * Copyright (C) 2014 Atmel Corporation
> + * Josh Wu <josh.wu@atmel.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_AT91_SAMA5_H
> +#define __CONFIG_AT91_SAMA5_H
> +
> +#include <asm/hardware.h>
> +
> +#define CONFIG_SYS_TEXT_BASE 0x26f00000
> +
> +/* ARM asynchronous clock */
> +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
> +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
> +
> +#define CONFIG_ARCH_CPU_INIT
> +
> +#ifndef CONFIG_SPL_BUILD
> +#define CONFIG_SKIP_LOWLEVEL_INIT
> +#endif
> +
> +#define CONFIG_BOARD_EARLY_INIT_F
> +#define CONFIG_DISPLAY_CPUINFO
> +
> +#define CONFIG_CMD_BOOTZ
> +#define CONFIG_OF_LIBFDT /* Device Tree support */
> +
> +#define CONFIG_SYS_GENERIC_BOARD
> +
> +/* general purpose I/O */
> +#define CONFIG_AT91_GPIO
> +
> +#define CONFIG_BOOTDELAY 3
> +
> +/*
> + * BOOTP options
> + */
> +#define CONFIG_BOOTP_BOOTFILESIZE
> +#define CONFIG_BOOTP_BOOTPATH
> +#define CONFIG_BOOTP_GATEWAY
> +#define CONFIG_BOOTP_HOSTNAME
> +
> +/*
> + * Command line configuration.
> + */
> +#include <config_cmd_default.h>
> +#undef CONFIG_CMD_FPGA
> +#undef CONFIG_CMD_IMI
> +#undef CONFIG_CMD_LOADS
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_SETEXPR
> +
> +#ifdef CONFIG_SYS_USE_MMC
> +#define CONFIG_BOOTARGS \
> + "console=ttyS0,115200 earlyprintk " \
> + "root=/dev/mmcblk0p2 rw rootwait"
> +#else
> +#define CONFIG_BOOTARGS \
> + "console=ttyS0,115200 earlyprintk " \
> + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
> + "256K(env),256k(evn_redundent),256k(spare)," \
> + "512k(dtb),6M(kernel)ro,-(rootfs) " \
> + "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
> +#endif
> +
> +#define CONFIG_BAUDRATE 115200
> +
> +#define CONFIG_SYS_PROMPT "U-Boot> "
> +#define CONFIG_SYS_CBSIZE 256
> +#define CONFIG_SYS_MAXARGS 16
> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> + sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_CMDLINE_EDITING
> +#define CONFIG_AUTO_COMPLETE
> +#define CONFIG_SYS_HUSH_PARSER
> +
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
> +
> +#endif
> \ No newline at end of file
> diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
> index d24d600..75c3be6 100644
> --- a/include/configs/sama5d3_xplained.h
> +++ b/include/configs/sama5d3_xplained.h
> @@ -10,30 +10,10 @@
> #ifndef __CONFIG_H
> #define __CONFIG_H
>
> -#include <asm/hardware.h>
> -
> -#define CONFIG_SYS_TEXT_BASE 0x26f00000
> -
> -/* ARM asynchronous clock */
> -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
> -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
> -
> -#define CONFIG_ARCH_CPU_INIT
> -
> -#ifndef CONFIG_SPL_BUILD
> -#define CONFIG_SKIP_LOWLEVEL_INIT
> -#endif
> -
> -#define CONFIG_BOARD_EARLY_INIT_F
> -#define CONFIG_DISPLAY_CPUINFO
> -
> -#define CONFIG_CMD_BOOTZ
> -#define CONFIG_OF_LIBFDT /* Device Tree support */
> -
> -#define CONFIG_SYS_GENERIC_BOARD
> +/* No NOR flash, this definition should put before common header */
> +#define CONFIG_SYS_NO_FLASH
>
> -/* general purpose I/O */
> -#define CONFIG_AT91_GPIO
> +#include "at91-sama5_common.h"
>
> /* serial console */
> #define CONFIG_ATMEL_USART
> @@ -51,29 +31,6 @@
> */
> #define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
>
> -#define CONFIG_BOOTDELAY 3
> -
> -/*
> - * BOOTP options
> - */
> -#define CONFIG_BOOTP_BOOTFILESIZE
> -#define CONFIG_BOOTP_BOOTPATH
> -#define CONFIG_BOOTP_GATEWAY
> -#define CONFIG_BOOTP_HOSTNAME
> -
> -/* No NOR flash */
> -#define CONFIG_SYS_NO_FLASH
> -
> -/*
> - * Command line configuration.
> - */
> -#include <config_cmd_default.h>
> -#undef CONFIG_CMD_FPGA
> -#undef CONFIG_CMD_IMI
> -#undef CONFIG_CMD_LOADS
> -#define CONFIG_CMD_PING
> -#define CONFIG_CMD_DHCP
> -
> /* SDRAM */
> #define CONFIG_NR_DRAM_BANKS 1
> #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
> @@ -180,34 +137,6 @@
> #define CONFIG_ENV_IS_NOWHERE
> #endif
>
> -#ifdef CONFIG_SYS_USE_MMC
> -#define CONFIG_BOOTARGS \
> - "console=ttyS0,115200 earlyprintk " \
> - "root=/dev/mmcblk0p2 rw rootwait"
> -#else
> -#define CONFIG_BOOTARGS \
> - "console=ttyS0,115200 earlyprintk " \
> - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
> - "256K(env),256k(evn_redundent),256k(spare)," \
> - "512k(dtb),6M(kernel)ro,-(rootfs) " \
> - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
> -#endif
> -
> -#define CONFIG_BAUDRATE 115200
> -
> -#define CONFIG_SYS_PROMPT "U-Boot> "
> -#define CONFIG_SYS_CBSIZE 256
> -#define CONFIG_SYS_MAXARGS 16
> -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> - sizeof(CONFIG_SYS_PROMPT) + 16)
> -#define CONFIG_SYS_LONGHELP
> -#define CONFIG_CMDLINE_EDITING
> -#define CONFIG_AUTO_COMPLETE
> -#define CONFIG_SYS_HUSH_PARSER
> -
> -/* Size of malloc() pool */
> -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
> -
> /* SPL */
> #define CONFIG_SPL_FRAMEWORK
> #define CONFIG_SPL_TEXT_BASE 0x300000
> diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
> index dfbf3cb..ee0fddb 100644
> --- a/include/configs/sama5d3xek.h
> +++ b/include/configs/sama5d3xek.h
> @@ -13,30 +13,11 @@
> #ifndef __CONFIG_H
> #define __CONFIG_H
>
> -#include <asm/hardware.h>
> -
> -#define CONFIG_SYS_TEXT_BASE 0x26f00000
> -
> -/* ARM asynchronous clock */
> -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
> -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
> -
> -#define CONFIG_ARCH_CPU_INIT
> -
> -#ifndef CONFIG_SPL_BUILD
> -#define CONFIG_SKIP_LOWLEVEL_INIT
> -#endif
> -
> -#define CONFIG_BOARD_EARLY_INIT_F
> -#define CONFIG_DISPLAY_CPUINFO
> -
> -#define CONFIG_CMD_BOOTZ
> -#define CONFIG_OF_LIBFDT /* Device Tree support */
> -
> -#define CONFIG_SYS_GENERIC_BOARD
> -
> -/* general purpose I/O */
> -#define CONFIG_AT91_GPIO
> +/*
> + * If has No NOR flash, please put the definition: CONFIG_SYS_NO_FLASH
> + * before the common header.
> + */
> +#include "at91-sama5_common.h"
>
> /* serial console */
> #define CONFIG_ATMEL_USART
> @@ -69,40 +50,16 @@
> /* board specific (not enough SRAM) */
> #define CONFIG_SAMA5D3_LCD_BASE 0x23E00000
>
> -#define CONFIG_BOOTDELAY 3
> -
> -/*
> - * BOOTP options
> - */
> -#define CONFIG_BOOTP_BOOTFILESIZE
> -#define CONFIG_BOOTP_BOOTPATH
> -#define CONFIG_BOOTP_GATEWAY
> -#define CONFIG_BOOTP_HOSTNAME
> -
> /* NOR flash */
> -#define CONFIG_CMD_FLASH
> -
> -#ifdef CONFIG_CMD_FLASH
> +#ifndef CONFIG_SYS_NO_FLASH
> #define CONFIG_FLASH_CFI_DRIVER
> #define CONFIG_SYS_FLASH_CFI
> #define CONFIG_SYS_FLASH_PROTECTION
> #define CONFIG_SYS_FLASH_BASE 0x10000000
> #define CONFIG_SYS_MAX_FLASH_SECT 131
> #define CONFIG_SYS_MAX_FLASH_BANKS 1
> -#else
> -#define CONFIG_SYS_NO_FLASH
> #endif
>
> -/*
> - * Command line configuration.
> - */
> -#include <config_cmd_default.h>
> -#undef CONFIG_CMD_FPGA
> -#undef CONFIG_CMD_IMI
> -#undef CONFIG_CMD_LOADS
> -#define CONFIG_CMD_PING
> -#define CONFIG_CMD_DHCP
> -
> /* SDRAM */
> #define CONFIG_NR_DRAM_BANKS 1
> #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
> @@ -226,34 +183,6 @@
> #define CONFIG_ENV_IS_NOWHERE
> #endif
>
> -#ifdef CONFIG_SYS_USE_MMC
> -#define CONFIG_BOOTARGS \
> - "console=ttyS0,115200 earlyprintk " \
> - "root=/dev/mmcblk0p2 rw rootwait"
> -#else
> -#define CONFIG_BOOTARGS \
> - "console=ttyS0,115200 earlyprintk " \
> - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
> - "256K(env),256k(evn_redundent),256k(spare)," \
> - "512k(dtb),6M(kernel)ro,-(rootfs) " \
> - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
> -#endif
> -
> -#define CONFIG_BAUDRATE 115200
> -
> -#define CONFIG_SYS_PROMPT "U-Boot> "
> -#define CONFIG_SYS_CBSIZE 256
> -#define CONFIG_SYS_MAXARGS 16
> -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> - sizeof(CONFIG_SYS_PROMPT) + 16)
> -#define CONFIG_SYS_LONGHELP
> -#define CONFIG_CMDLINE_EDITING
> -#define CONFIG_AUTO_COMPLETE
> -#define CONFIG_SYS_HUSH_PARSER
> -
> -/* Size of malloc() pool */
> -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
> -
> /* SPL */
> #define CONFIG_SPL_FRAMEWORK
> #define CONFIG_SPL_TEXT_BASE 0x300000
> diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
> index 104edef..26af695 100644
> --- a/include/configs/sama5d4_xplained.h
> +++ b/include/configs/sama5d4_xplained.h
> @@ -10,57 +10,16 @@
> #ifndef __CONFIG_H
> #define __CONFIG_H
>
> -#include <asm/hardware.h>
> -
> -#define CONFIG_SYS_TEXT_BASE 0x26f00000
> -
> -/* ARM asynchronous clock */
> -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
> -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
> -
> -#define CONFIG_ARCH_CPU_INIT
> -
> -#define CONFIG_SKIP_LOWLEVEL_INIT
> -#define CONFIG_BOARD_EARLY_INIT_F
> -#define CONFIG_DISPLAY_CPUINFO
> -
> -#define CONFIG_CMD_BOOTZ
> -#define CONFIG_OF_LIBFDT /* Device Tree support */
> -
> -#define CONFIG_SYS_GENERIC_BOARD
> +/* No NOR flash, this definition should put before common header */
> +#define CONFIG_SYS_NO_FLASH
>
> -/* general purpose I/O */
> -#define CONFIG_AT91_GPIO
> +#include "at91-sama5_common.h"
>
> /* serial console */
> #define CONFIG_ATMEL_USART
> #define CONFIG_USART_BASE ATMEL_BASE_USART3
> #define CONFIG_USART_ID ATMEL_ID_USART3
>
> -#define CONFIG_BOOTDELAY 3
> -
> -/*
> - * BOOTP options
> - */
> -#define CONFIG_BOOTP_BOOTFILESIZE
> -#define CONFIG_BOOTP_BOOTPATH
> -#define CONFIG_BOOTP_GATEWAY
> -#define CONFIG_BOOTP_HOSTNAME
> -
> -/* No NOR flash */
> -#define CONFIG_SYS_NO_FLASH
> -
> -/*
> - * Command line configuration.
> - */
> -#include <config_cmd_default.h>
> -#undef CONFIG_CMD_FPGA
> -#undef CONFIG_CMD_IMI
> -#undef CONFIG_CMD_LOADS
> -#define CONFIG_CMD_PING
> -#define CONFIG_CMD_DHCP
> -#define CONFIG_CMD_SETEXPR
> -
> /* SDRAM */
> #define CONFIG_NR_DRAM_BANKS 1
> #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
> @@ -185,32 +144,5 @@
> "bootz 0x22000000 - 0x21000000"
> #endif
>
> -#ifdef CONFIG_SYS_USE_MMC
> -#define CONFIG_BOOTARGS \
> - "console=ttyS0,115200 earlyprintk " \
> - "root=/dev/mmcblk0p2 rw rootwait"
> -#else
> -#define CONFIG_BOOTARGS \
> - "console=ttyS0,115200 earlyprintk " \
> - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
> - "256K(env),256k(evn_redundent),256k(spare)," \
> - "512k(dtb),6M(kernel)ro,-(rootfs) " \
> - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
> -#endif
> -
> -#define CONFIG_BAUDRATE 115200
> -
> -#define CONFIG_SYS_PROMPT "U-Boot> "
> -#define CONFIG_SYS_CBSIZE 256
> -#define CONFIG_SYS_MAXARGS 16
> -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> - sizeof(CONFIG_SYS_PROMPT) + 16)
> -#define CONFIG_SYS_LONGHELP
> -#define CONFIG_CMDLINE_EDITING
> -#define CONFIG_AUTO_COMPLETE
> -#define CONFIG_SYS_HUSH_PARSER
> -
> -/* Size of malloc() pool */
> -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
>
> #endif
> diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
> index cbdb3a2..15a92af 100644
> --- a/include/configs/sama5d4ek.h
> +++ b/include/configs/sama5d4ek.h
> @@ -10,57 +10,16 @@
> #ifndef __CONFIG_H
> #define __CONFIG_H
>
> -#include <asm/hardware.h>
> -
> -#define CONFIG_SYS_TEXT_BASE 0x26f00000
> -
> -/* ARM asynchronous clock */
> -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
> -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
> -
> -#define CONFIG_ARCH_CPU_INIT
> -
> -#define CONFIG_SKIP_LOWLEVEL_INIT
> -#define CONFIG_BOARD_EARLY_INIT_F
> -#define CONFIG_DISPLAY_CPUINFO
> -
> -#define CONFIG_CMD_BOOTZ
> -#define CONFIG_OF_LIBFDT /* Device Tree support */
> -
> -#define CONFIG_SYS_GENERIC_BOARD
> +/* No NOR flash, this definition should put before common header */
> +#define CONFIG_SYS_NO_FLASH
>
> -/* general purpose I/O */
> -#define CONFIG_AT91_GPIO
> +#include "at91-sama5_common.h"
>
> /* serial console */
> #define CONFIG_ATMEL_USART
> #define CONFIG_USART_BASE ATMEL_BASE_USART3
> #define CONFIG_USART_ID ATMEL_ID_USART3
>
> -#define CONFIG_BOOTDELAY 3
> -
> -/*
> - * BOOTP options
> - */
> -#define CONFIG_BOOTP_BOOTFILESIZE
> -#define CONFIG_BOOTP_BOOTPATH
> -#define CONFIG_BOOTP_GATEWAY
> -#define CONFIG_BOOTP_HOSTNAME
> -
> -/* No NOR flash */
> -#define CONFIG_SYS_NO_FLASH
> -
> -/*
> - * Command line configuration.
> - */
> -#include <config_cmd_default.h>
> -#undef CONFIG_CMD_FPGA
> -#undef CONFIG_CMD_IMI
> -#undef CONFIG_CMD_LOADS
> -#define CONFIG_CMD_PING
> -#define CONFIG_CMD_DHCP
> -#define CONFIG_CMD_SETEXPR
> -
> /* SDRAM */
> #define CONFIG_NR_DRAM_BANKS 1
> #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
> @@ -181,34 +140,8 @@
> #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 sama5d4ek.dtb; " \
> "fatload mmc 0:1 0x22000000 zImage; " \
> "bootz 0x22000000 - 0x21000000"
> -#endif
> -
> -#ifdef CONFIG_SYS_USE_MMC
> -#define CONFIG_BOOTARGS \
> - "console=ttyS0,115200 earlyprintk " \
> - "root=/dev/mmcblk0p2 rw rootwait"
> #else
> -#define CONFIG_BOOTARGS \
> - "console=ttyS0,115200 earlyprintk " \
> - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
> - "256K(env),256k(evn_redundent),256k(spare)," \
> - "512k(dtb),6M(kernel)ro,-(rootfs) " \
> - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
> +#define CONFIG_ENV_IS_NOWHERE
> #endif
>
> -#define CONFIG_BAUDRATE 115200
> -
> -#define CONFIG_SYS_PROMPT "U-Boot> "
> -#define CONFIG_SYS_CBSIZE 256
> -#define CONFIG_SYS_MAXARGS 16
> -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> - sizeof(CONFIG_SYS_PROMPT) + 16)
> -#define CONFIG_SYS_LONGHELP
> -#define CONFIG_CMDLINE_EDITING
> -#define CONFIG_AUTO_COMPLETE
> -#define CONFIG_SYS_HUSH_PARSER
> -
> -/* Size of malloc() pool */
> -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
> -
> #endif
>
next prev parent reply other threads:[~2015-03-29 20:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-19 11:02 [U-Boot] [PATCH 0/6] ARM: at91: SAMA5: extract the common sama5 chip configurations to a common header Josh Wu
2014-11-19 11:03 ` [U-Boot] [PATCH 1/6] ARM: at91: sama5d3_xplained: spl: enable PMECC header generation Josh Wu
2014-11-20 1:13 ` Bo Shen
2015-01-19 11:50 ` [U-Boot] [U-Boot, " Andreas Bießmann
2014-11-19 11:03 ` [U-Boot] [PATCH 2/6] ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h Josh Wu
2015-03-29 20:52 ` Andreas Bießmann [this message]
2015-03-30 6:54 ` Josh Wu
2014-11-19 11:03 ` [U-Boot] [PATCH 3/6] ARM: at91: sama5d3_xplained: set ENV_FAT_DEVICE_AND_PART intead of using number Josh Wu
2014-11-19 11:03 ` [U-Boot] [PATCH 4/6] ARM: at91: sama5d3: mmc: save enviroment as a fat file (uboot.env) Josh Wu
2014-11-19 11:03 ` [U-Boot] [PATCH 5/6] ARM: at91: sama5: move the bootcmd definition to the common header Josh Wu
2014-11-19 11:03 ` [U-Boot] [PATCH 6/6] ARM: at91: at91sam9x5: mmc: save environment as a file in FAT partition Josh Wu
2014-11-20 1:12 ` [U-Boot] [PATCH 0/6] ARM: at91: SAMA5: extract the common sama5 chip configurations to a common header Bo Shen
2014-11-20 3:22 ` Josh Wu
2014-11-20 3:40 ` Bo Shen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55186624.8060804@googlemail.com \
--to=andreas.devel@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.