From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] U-boot and UBI problem with vexpress board.
Date: Mon, 30 Mar 2015 07:40:41 +0200 [thread overview]
Message-ID: <5518E1D9.2000104@denx.de> (raw)
In-Reply-To: <55157CEC.2010804@gmail.com>
Hello Marcin,
Am 27.03.2015 16:53, schrieb mar.krzeminski:
> Hi Stefan,
>
> I've changed malloc pool size to 2MiB and nothing changed.
> I've also disabled UBIFS support and that does not make any changes.
> Still after qemu restart u-boot can not attach to ubi device.
Hmm.. hard to say, can you enable debug (not only in UBI) and
maybe try current mainline U-Boot?
The line "UBI error: vtbl_check: bad CRC at record 0: 0x88cdfb6, not 0xffffffff"
... it seems, you have some problems reading your flash ... can
you try a to write into your flash, reread the content and
compare it?
Thanks!
bye,
Heiko
>
> Regards,
> Marcin
>
> W dniu 27.03.2015 o 16:01, Stefan Roese pisze:
>> Hi Marcin,
>>
>> On 27.03.2015 13:59, Marcin Krzemi?ski wrote:
>>> I want to test some UBI fs behavior in U-Boot using qemu and vexpress_ca9x4
>>> board ( U-Boot 2015.1)
>>> To tst UBI I added lines to vexpress_ca9x4.h:
>>>
>>> #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
>>> #define CONFIG_MTD_PARTITIONS /* needed for UBI */
>>> #define CONFIG_FLASH_CFI_MTD
>>> #define MTDIDS_DEFAULT "nor0=flash0-0"
>>> #define MTDPARTS_DEFAULT "mtdparts=flash0-0:1m(empty),10m(ubi),-(rest)"
>>> #define CONFIG_LZO /* needed for UBI */
>>> #define CONFIG_RBTREE /* needed for UBI */
>>> #define CONFIG_CMD_MTDPARTS
>>> #define CONFIG_CMD_UBI
>>> #define CONFIG_CMD_UBIFS
>>> #define CONFIG_FIT
>>>
>>> also I've changed malloc pool size to 512kB in vexpress_common.h:
>>> #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024)
>>
>> Without looking deeper into your mail, I would recommend to increase the malloc size to at least 2MiB and test again.
>>
>> Thanks,
>> Stefan
>>
>>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
prev parent reply other threads:[~2015-03-30 5:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-27 12:59 [U-Boot] U-boot and UBI problem with vexpress board Marcin Krzemiński
2015-03-27 15:01 ` Stefan Roese
2015-03-27 15:53 ` mar.krzeminski
2015-03-29 19:57 ` mar.krzeminski
2015-03-30 6:05 ` Heiko Schocher
2015-03-30 18:07 ` mar.krzeminski
2015-03-31 5:24 ` Heiko Schocher
2015-03-31 5:33 ` Marcin Krzemiński
2015-03-30 5:40 ` Heiko Schocher [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5518E1D9.2000104@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.