From: Brad Campbell <lists2009@fnarfbargle.com>
To: Saso Slavicic <saso.linux@astim.si>,
'Paolo Bonzini' <pbonzini@redhat.com>,
kvm@vger.kernel.org
Subject: Re: XP machine freeze
Date: Tue, 31 Mar 2015 15:18:26 +0800 [thread overview]
Message-ID: <551A4A42.10309@fnarfbargle.com> (raw)
In-Reply-To: <004f01d06b7c$08b96970$1a2c3c50$@astim.si>
On 31/03/15 14:29, Saso Slavicic wrote:
>> From: Brad Campbell
>> Sent: Tuesday, March 31, 2015 2:28 AM
>>
>>
>> If someone could give me some hard tests to do along the lines of what
>> Saso is up to I could probably get that done faster. With the right
>> bad kernel I can reproduce this lockup in a matter of hours.
> Hi,
>
> My machine usually (but not always) locks during backup. At around 3AM, a
> samba machine (a kvm machine on the same server actually) cifs mounts C$ and
> starts copying files off of it. The last stacktrace also shows network code.
> Is your machine actively working over network (sharing files)?
>
Better than that, it's recording h264 rtsp streams from 3 CCTV cameras,
so there is a constant network load of about 1.5-2MB/s (bytes not bits).
Come to think of it, out of the 3 XP VM's I have that are an identical
config and actually come from the same qcow2 base image this is the one
that hits the network hard. The other 2 hardly touch the network.
virtio network interface. I can get it to lock up in hours with the
right kernel, and repeat lockups after unlocking it with virt-viewer are
usually less than an hour at most.
My issue is my first bisect proved to be inconclusive, and the second
one is about 3 steps from done, but there are no kvm commits in the
current set under investigation.
I *know* that 3.15.6 was good as I ran that kernel for months, it all
started when I upgraded to a 3.18 and I think I've narrowed it down, but
like I said the bisects are just not falling out as plausible, and at 5
days for a good and up to 24 hours for a bad it's slow going.
I'll finish this bisect and then have a crack at the good/bad range
suggested by Paolo. The issue is being a production box I have to
schedule the re-boots.
I'm just not sure bisection is the right answer to tracking this down. I
just don't have the background to know what to poke to try and debug
this any other way.
Regards,
Brad
--
Dolphins are so intelligent that within a few weeks they can
train Americans to stand at the edge of the pool and throw them
fish.
next prev parent reply other threads:[~2015-03-31 7:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-16 15:10 XP machine freeze Saso Slavicic
2015-03-19 0:51 ` Marcelo Tosatti
2015-03-30 16:19 ` Saso Slavicic
2015-03-22 15:31 ` Brad Campbell
2015-03-30 21:11 ` Paolo Bonzini
2015-03-31 0:27 ` Brad Campbell
2015-03-31 6:29 ` Saso Slavicic
2015-03-31 7:18 ` Brad Campbell [this message]
2015-03-31 8:56 ` Paolo Bonzini
2015-03-31 11:16 ` Brad Campbell
2015-03-31 11:23 ` Paolo Bonzini
2015-04-04 10:55 ` Brad Campbell
2015-04-13 4:07 ` Brad Campbell
2015-04-13 12:38 ` Paolo Bonzini
2015-04-13 12:45 ` Brad Campbell
2015-04-13 14:02 ` Paolo Bonzini
2015-04-13 14:25 ` Brad Campbell
2015-04-19 15:27 ` Brad Campbell
2015-04-19 15:48 ` Nadav Amit
2015-04-19 16:50 ` Brad Campbell
2015-04-19 17:16 ` Paolo Bonzini
2015-04-13 12:47 ` Saso Slavicic
2015-04-13 13:33 ` Radim Krčmář
2015-04-13 13:34 ` Nadav Amit
2015-04-13 14:01 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=551A4A42.10309@fnarfbargle.com \
--to=lists2009@fnarfbargle.com \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=saso.linux@astim.si \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.