All of lore.kernel.org
 help / color / mirror / Atom feed
From: roopa <roopa@cumulusnetworks.com>
To: sfeldma@gmail.com
Cc: netdev@vger.kernel.org, jiri@resnulli.us, linux@roeck-us.net,
	f.fainelli@gmail.com, sridhar.samudrala@intel.com,
	ronen.arad@intel.com, andrew@lunn.ch
Subject: Re: [PATCH net-next v4 09/24] switchdev: add new swdev bridge setlink
Date: Mon, 13 Apr 2015 22:46:46 -0700	[thread overview]
Message-ID: <552CA9C6.8090906@cumulusnetworks.com> (raw)
In-Reply-To: <1428905838-14920-10-git-send-email-sfeldma@gmail.com>

On 4/12/15, 11:17 PM, sfeldma@gmail.com wrote:
> From: Scott Feldman <sfeldma@gmail.com>
>
> Add new swdev_port_bridge_setlink that can be used by drivers implementing
> .ndo_bridge_setlink to set swdev bridge attributes.  Basically turn the raw
> rtnl_bridge_setlink netlink into swdev attr sets.  Proper netlink attr policy
> checking is done on the protinfo part of the netlink msg.
>
> Currently, for protinfo, only bridge port attrs BR_LEARNING and
> BR_LEARNING_SYNC are parsed and passed to port driver.
>
> For afspec, VLAN objs are passed so swdev driver can set VLANs assigned to
> SELF.  To illustrate with iproute2 cmd, we have:
>
> 	bridge vlan add vid 10 dev sw1p1 self master
>
> To add VLAN 10 to port sw1p1 for both the bridge (master) and the device
> (self).

This results in vlan sets/dels/notification code duplicated in both 
bridge and switchdev layer.
>
> Signed-off-by: Scott Feldman <sfeldma@gmail.com>
> ---
>   include/net/switchdev.h   |    8 +++
>   net/switchdev/switchdev.c |  152 +++++++++++++++++++++++++++++++++++++++++++++
>   2 files changed, 160 insertions(+)
>
> diff --git a/include/net/switchdev.h b/include/net/switchdev.h
> index d3cc8eb..cff53ae 100644
> --- a/include/net/switchdev.h
> +++ b/include/net/switchdev.h
> @@ -121,6 +121,8 @@ int swdev_port_attr_get(struct net_device *dev, struct swdev_attr *attr);
>   int swdev_port_attr_set(struct net_device *dev, struct swdev_attr *attr);
>   int swdev_port_obj_add(struct net_device *dev, struct swdev_obj *obj);
>   int swdev_port_obj_del(struct net_device *dev, struct swdev_obj *obj);
> +int swdev_port_bridge_setlink(struct net_device *dev, struct nlmsghdr *nlh,
> +			      u16 flags);
>   int register_netdev_switch_notifier(struct notifier_block *nb);
>   int unregister_netdev_switch_notifier(struct notifier_block *nb);
>   int call_netdev_switch_notifiers(unsigned long val, struct net_device *dev,
> @@ -165,6 +167,12 @@ static inline int swdev_port_obj_del(struct net_device *dev,
>   	return -EOPNOTSUPP;
>   }
>   
> +static inline int swdev_port_bridge_setlink(struct net_device *dev,
> +					    struct nlmsghdr *nlh, u16 flags)
> +{
> +	return -EOPNOTSUPP;
> +}
> +
>   static inline int register_netdev_switch_notifier(struct notifier_block *nb)
>   {
>   	return 0;
> diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c
> index 05fded9..31d55e7 100644
> --- a/net/switchdev/switchdev.c
> +++ b/net/switchdev/switchdev.c
> @@ -15,6 +15,7 @@
>   #include <linux/mutex.h>
>   #include <linux/notifier.h>
>   #include <linux/netdevice.h>
> +#include <linux/if_bridge.h>
>   #include <net/ip_fib.h>
>   #include <net/switchdev.h>
>   
> @@ -395,6 +396,157 @@ int netdev_switch_port_bridge_setlink(struct net_device *dev,
>   }
>   EXPORT_SYMBOL_GPL(netdev_switch_port_bridge_setlink);
>   
> +static int swdev_port_br_setflag(struct net_device *dev, struct nlattr *nlattr,
> +				 unsigned long brport_flag)
> +{
> +	struct swdev_attr attr = {
> +		.id = SWDEV_ATTR_PORT_BRIDGE_FLAGS,
> +	};
> +	u8 flag = nla_get_u8(nlattr);
> +	int err;
> +
> +	err = swdev_port_attr_get(dev, &attr);
> +	if (err)
> +		return err;
> +
> +	if (flag)
> +		attr.brport_flags |= brport_flag;
> +	else
> +		attr.brport_flags &= ~brport_flag;
> +
> +	return swdev_port_attr_set(dev, &attr);
> +}
> +
> +static const struct nla_policy swdev_port_bridge_policy[IFLA_BRPORT_MAX + 1] = {
> +	[IFLA_BRPORT_STATE]		= { .type = NLA_U8 },
> +	[IFLA_BRPORT_COST]		= { .type = NLA_U32 },
> +	[IFLA_BRPORT_PRIORITY]		= { .type = NLA_U16 },
> +	[IFLA_BRPORT_MODE]		= { .type = NLA_U8 },
> +	[IFLA_BRPORT_GUARD]		= { .type = NLA_U8 },
> +	[IFLA_BRPORT_PROTECT]		= { .type = NLA_U8 },
> +	[IFLA_BRPORT_FAST_LEAVE]	= { .type = NLA_U8 },
> +	[IFLA_BRPORT_LEARNING]		= { .type = NLA_U8 },
> +	[IFLA_BRPORT_LEARNING_SYNC]	= { .type = NLA_U8 },
> +	[IFLA_BRPORT_UNICAST_FLOOD]	= { .type = NLA_U8 },
> +};
> +
> +static int swdev_port_br_setlink_protinfo(struct net_device *dev,
> +					  struct nlattr *protinfo)
> +{
> +	struct nlattr *attr;
> +	int rem;
> +	int err;
> +
> +	err = nla_validate_nested(protinfo, IFLA_BRPORT_MAX,
> +				  swdev_port_bridge_policy);
> +	if (err)
> +		return err;
> +
> +	nla_for_each_nested(attr, protinfo, rem) {
> +		switch (nla_type(attr)) {
> +		case IFLA_BRPORT_LEARNING:
> +			err = swdev_port_br_setflag(dev, attr,
> +						    BR_LEARNING);
> +			break;
> +		case IFLA_BRPORT_LEARNING_SYNC:
> +			err = swdev_port_br_setflag(dev, attr,
> +						    BR_LEARNING_SYNC);
> +			break;
> +		default:
> +			err = -EOPNOTSUPP;
> +			break;
> +		}
> +		if (err)
> +			return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static int swdev_port_br_afspec(struct net_device *dev,
> +				struct nlattr *afspec,
> +				int (*f)(struct net_device *dev,
> +					 struct swdev_obj *obj))
> +{
> +	struct nlattr *attr;
> +	struct bridge_vlan_info *vinfo;
> +	struct swdev_obj obj = {
> +		.id = SWDEV_OBJ_PORT_VLAN,
> +	};
> +	int rem;
> +	int err;
> +
> +	nla_for_each_nested(attr, afspec, rem) {
> +		if (nla_type(attr) != IFLA_BRIDGE_VLAN_INFO)
> +			continue;
> +		if (nla_len(attr) != sizeof(struct bridge_vlan_info))
> +			return -EINVAL;
> +		vinfo = nla_data(attr);
> +		obj.vlan.flags = vinfo->flags;
> +		if (vinfo->flags & BRIDGE_VLAN_INFO_RANGE_BEGIN) {
> +			if (obj.vlan.vid_start)
> +				return -EINVAL;
> +			obj.vlan.vid_start = vinfo->vid;
> +		} else if (vinfo->flags & BRIDGE_VLAN_INFO_RANGE_END) {
> +			if (!obj.vlan.vid_start)
> +				return -EINVAL;
> +			obj.vlan.vid_end = vinfo->vid;
> +			if (obj.vlan.vid_end <= obj.vlan.vid_start)
> +				return -EINVAL;
> +			err = f(dev, &obj);
> +			if (err)
> +				return err;
> +			memset(&obj.vlan, 0, sizeof(obj.vlan));
> +		} else {
> +			if (obj.vlan.vid_start)
> +				return -EINVAL;
> +			obj.vlan.vid_start = vinfo->vid;
> +			obj.vlan.vid_end = vinfo->vid;
> +			err = f(dev, &obj);
> +			if (err)
> +				return err;
> +			memset(&obj.vlan, 0, sizeof(obj.vlan));
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + *	swdev_port_bridge_setlink - Set bridge port attributes
> + *
> + *	@dev: port device
> + *	@nlh: netlink header
> + *	@flags: netlink flags
> + *
> + *	Called for SELF on rtnl_bridge_setlink to set bridge port
> + *	attributes.
> + */
> +int swdev_port_bridge_setlink(struct net_device *dev,
> +			      struct nlmsghdr *nlh, u16 flags)
> +{
> +	struct nlattr *protinfo;
> +	struct nlattr *afspec;
> +	int err = 0;
> +
> +	protinfo = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg),
> +				   IFLA_PROTINFO);
> +	if (protinfo) {
> +		err = swdev_port_br_setlink_protinfo(dev, protinfo);
> +		if (err)
> +			return err;
> +	}
> +
> +	afspec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg),
> +				 IFLA_AF_SPEC);
> +	if (afspec)
> +		err = swdev_port_br_afspec(dev, afspec,
> +					   swdev_port_obj_add);
> +
> +	return err;
> +}
> +EXPORT_SYMBOL_GPL(swdev_port_bridge_setlink);
> +
>   /**
>    *	netdev_switch_port_bridge_dellink - Notify switch device port of bridge
>    *	port attribute delete

  parent reply	other threads:[~2015-04-14  5:46 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-13  6:16 [PATCH net-next v4 00/24] switchdev: spring cleanup sfeldma
2015-04-13  6:16 ` [PATCH net-next v4 01/24] switchdev: introduce get/set attrs ops sfeldma
2015-04-13 10:43   ` Jiri Pirko
2015-04-14  7:02     ` Scott Feldman
2015-04-13  6:16 ` [PATCH net-next v4 02/24] switchdev: convert parent_id_get to swdev attr get sfeldma
2015-04-13  6:16 ` [PATCH net-next v4 03/24] switchdev: convert STP update to swdev attr set sfeldma
2015-04-13 19:22   ` Florian Fainelli
2015-04-14  7:51     ` Scott Feldman
2015-04-13  6:16 ` [PATCH net-next v4 04/24] switchdev: add bridge port flags attr sfeldma
2015-04-13  6:16 ` [PATCH net-next v4 05/24] rocker: use swdev get/set attr for bridge port flags sfeldma
2015-04-13 10:48   ` Jiri Pirko
2015-04-15  5:25   ` Simon Horman
2015-04-15  6:03     ` Scott Feldman
2015-04-15  8:03       ` Simon Horman
2015-04-13  6:17 ` [PATCH net-next v4 06/24] switchdev: introduce swdev add/del obj ops sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 07/24] switchdev: add port vlan obj sfeldma
2015-04-13 13:16   ` Jiri Pirko
2015-04-13 13:27     ` Jiri Pirko
2015-04-13 17:49   ` Florian Fainelli
2015-04-14  7:28     ` Scott Feldman
2015-04-13  6:17 ` [PATCH net-next v4 08/24] rocker: use swdev add/del obj for bridge port vlans sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 09/24] switchdev: add new swdev bridge setlink sfeldma
2015-04-14  4:09   ` roopa
2015-04-14  5:30     ` Jiri Pirko
2015-04-14  5:46   ` roopa [this message]
2015-04-13  6:17 ` [PATCH net-next v4 10/24] rocker: cut over to new swdev_port_bridge_setlink sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 11/24] bonding: " sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 12/24] team: " sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 13/24] switchdev: remove old netdev_switch_port_bridge_setlink sfeldma
2015-04-14  4:07   ` roopa
2015-04-13  6:17 ` [PATCH net-next v4 14/24] switchdev: add new swdev_port_bridge_dellink sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 15/24] rocker: cut over to " sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 16/24] bonding: " sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 17/24] team: " sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 18/24] switchdev: remove unused netdev_switch_port_bridge_dellink sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 19/24] switchdev: add new swdev_port_bridge_getlink sfeldma
2015-04-14  5:47   ` roopa
2015-04-14  7:59     ` Scott Feldman
2015-04-13  6:17 ` [PATCH net-next v4 20/24] rocker: cut over to " sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 21/24] bonding: " sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 22/24] team: " sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 23/24] switchdev: convert fib_ipv4_add/del over to swdev_port_obj_add/del sfeldma
2015-04-13  6:17 ` [PATCH net-next v4 24/24] switchdev: bring documentation up-to-date sfeldma
2015-04-13  8:24 ` [PATCH net-next v4 00/24] switchdev: spring cleanup Jiri Pirko
2015-04-14  5:47 ` roopa
2015-04-17  4:48   ` roopa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=552CA9C6.8090906@cumulusnetworks.com \
    --to=roopa@cumulusnetworks.com \
    --cc=andrew@lunn.ch \
    --cc=f.fainelli@gmail.com \
    --cc=jiri@resnulli.us \
    --cc=linux@roeck-us.net \
    --cc=netdev@vger.kernel.org \
    --cc=ronen.arad@intel.com \
    --cc=sfeldma@gmail.com \
    --cc=sridhar.samudrala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.