[PATCH v2 7/8] drm/i915: Move toggling planes out of crtc enable/disable.

[Maarten Lankhorst <maarten.lankhorst@linux.intel.com>]

This makes disabling planes more explicit.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
Changes since v1:
- Create a intel_crtc_reset function for i915_debugfs.c instead of calling .crtc members directly.
- Remove the checks for intel_crtc->active, they're wrong. (thanks anderco)

 drivers/gpu/drm/i915/i915_debugfs.c  |  6 ++---
 drivers/gpu/drm/i915/intel_display.c | 46 ++++++++++++++++++++++--------------
 drivers/gpu/drm/i915/intel_drv.h     |  1 +
 3 files changed, 31 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 07a71c0ff775..60e86f331313 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3594,8 +3594,7 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 		intel_display_power_get(dev_priv,
 					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
 
-		dev_priv->display.crtc_disable(&crtc->base);
-		dev_priv->display.crtc_enable(&crtc->base);
+		intel_crtc_reset(&crtc->base);
 	}
 	drm_modeset_unlock_all(dev);
 }
@@ -3616,8 +3615,7 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 	if (crtc->config->pch_pfit.force_thru) {
 		crtc->config->pch_pfit.force_thru = false;
 
-		dev_priv->display.crtc_disable(&crtc->base);
-		dev_priv->display.crtc_enable(&crtc->base);
+		intel_crtc_reset(&crtc->base);
 
 		intel_display_power_put(dev_priv,
 					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 47fbdb5c71cb..61a29f142c70 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -105,6 +105,8 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc);
 static void intel_finish_crtc_commit(struct drm_crtc *crtc);
 static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
 	struct intel_crtc_state *crtc_state);
+static void intel_crtc_enable_planes(struct drm_crtc *crtc);
+static void intel_crtc_disable_planes(struct drm_crtc *crtc);
 
 static struct intel_encoder *intel_find_encoder(struct intel_connector *connector, int pipe)
 {
@@ -3103,6 +3105,19 @@ static void intel_update_primary_planes(struct drm_device *dev)
 	}
 }
 
+void intel_crtc_reset(struct intel_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+
+	if (!crtc->active)
+		return;
+
+	intel_crtc_disable_planes(&crtc->base);
+	dev_priv->display.crtc_disable(&crtc->base);
+	dev_priv->display.crtc_enable(&crtc->base);
+	intel_crtc_enable_planes(&crtc->base);
+}
+
 void intel_prepare_reset(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);
@@ -3123,8 +3138,11 @@ void intel_prepare_reset(struct drm_device *dev)
 	 * g33 docs say we should at least disable all the planes.
 	 */
 	for_each_intel_crtc(dev, crtc) {
-		if (crtc->active)
-			dev_priv->display.crtc_disable(&crtc->base);
+		if (!crtc->active)
+			continue;
+
+		intel_crtc_disable_planes(&crtc->base);
+		dev_priv->display.crtc_disable(&crtc->base);
 	}
 }
 
@@ -4713,8 +4731,6 @@ intel_pre_disable_primary(struct drm_crtc *crtc)
 
 static void intel_crtc_enable_planes(struct drm_crtc *crtc)
 {
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
 	intel_enable_primary_hw_plane(crtc->primary, crtc);
 	intel_enable_sprite_planes(crtc);
 	intel_crtc_update_cursor(crtc, true);
@@ -4820,8 +4836,6 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 
 	if (HAS_PCH_CPT(dev))
 		cpt_verify_modeset(dev, intel_crtc->pipe);
-
-	intel_crtc_enable_planes(crtc);
 }
 
 /* IPS only exists on ULT machines and is tied to pipe A. */
@@ -4943,7 +4957,6 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	/* If we change the relative order between pipe/planes enabling, we need
 	 * to change the workaround. */
 	haswell_mode_set_planes_workaround(intel_crtc);
-	intel_crtc_enable_planes(crtc);
 }
 
 static void ironlake_pfit_disable(struct intel_crtc *crtc)
@@ -4973,8 +4986,6 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
 	if (!intel_crtc->active)
 		return;
 
-	intel_crtc_disable_planes(crtc);
-
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->disable(encoder);
 
@@ -5037,8 +5048,6 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 	if (!intel_crtc->active)
 		return;
 
-	intel_crtc_disable_planes(crtc);
-
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		intel_opregion_notify_encoder(encoder, false);
 		encoder->disable(encoder);
@@ -5578,8 +5587,6 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->enable(encoder);
-
-	intel_crtc_enable_planes(crtc);
 }
 
 static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
@@ -5636,8 +5643,6 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->enable(encoder);
-
-	intel_crtc_enable_planes(crtc);
 }
 
 static void i9xx_pfit_disable(struct intel_crtc *crtc)
@@ -5666,8 +5671,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 	if (!intel_crtc->active)
 		return;
 
-	intel_crtc_disable_planes(crtc);
-
 	/*
 	 * On gen2 planes are double buffered but the pipe isn't, so we must
 	 * wait for planes to fully turn off before disabling the pipe.
@@ -5731,9 +5734,11 @@ void intel_crtc_control(struct drm_crtc *crtc, bool enable)
 			intel_crtc->enabled_power_domains = domains;
 
 			dev_priv->display.crtc_enable(crtc);
+			intel_crtc_enable_planes(crtc);
 		}
 	} else {
 		if (intel_crtc->active) {
+			intel_crtc_disable_planes(crtc);
 			dev_priv->display.crtc_disable(crtc);
 
 			domains = intel_crtc->enabled_power_domains;
@@ -5768,6 +5773,7 @@ static void intel_crtc_disable(struct drm_crtc *crtc)
 	/* crtc should still be enabled when we disable it. */
 	WARN_ON(!crtc->state->enable);
 
+	intel_crtc_disable_planes(crtc);
 	dev_priv->display.crtc_disable(crtc);
 	dev_priv->display.off(crtc);
 
@@ -11991,8 +11997,10 @@ static int __intel_set_mode(struct drm_crtc *crtc,
 		intel_crtc_disable(&intel_crtc->base);
 
 	for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
-		if (intel_crtc->base.state->enable)
+		if (intel_crtc->base.state->enable) {
+			intel_crtc_disable_planes(&intel_crtc->base);
 			dev_priv->display.crtc_disable(&intel_crtc->base);
+		}
 	}
 
 	/* crtc->mode is already used by the ->mode_set callbacks, hence we need
@@ -12040,6 +12048,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
 		update_scanline_offset(intel_crtc);
 
 		dev_priv->display.crtc_enable(&intel_crtc->base);
+		intel_crtc_enable_planes(&intel_crtc->base);
 	}
 
 	/* FIXME: add subpixel order */
@@ -14433,6 +14442,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 		plane = crtc->plane;
 		to_intel_plane_state(crtc->base.primary->state)->visible = true;
 		crtc->plane = !plane;
+		intel_crtc_disable_planes(&crtc->base);
 		dev_priv->display.crtc_disable(&crtc->base);
 		crtc->plane = plane;
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index eb1195a1de99..70b70e9be167 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -987,6 +987,7 @@ void intel_mark_busy(struct drm_device *dev);
 void intel_mark_idle(struct drm_device *dev);
 void intel_crtc_restore_mode(struct drm_crtc *crtc);
 void intel_crtc_control(struct drm_crtc *crtc, bool enable);
+void intel_crtc_reset(struct intel_crtc *crtc);
 void intel_crtc_update_dpms(struct drm_crtc *crtc);
 void intel_encoder_destroy(struct drm_encoder *encoder);
 int intel_connector_init(struct intel_connector *);
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx