All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jan Kiszka <jan.kiszka@siemens.com>
To: Steven Rostedt <rostedt@goodmis.org>,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: RT <linux-rt-users@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH RT 3.18] irq_work: Provide a soft-irq based queue
Date: Thu, 16 Apr 2015 18:28:16 +0200	[thread overview]
Message-ID: <552FE320.6050601@siemens.com> (raw)
In-Reply-To: <552FD55F.8000105@siemens.com>

Instead of turning all irq_work requests into lazy ones on -rt, just
move their execution from hard into soft-irq context.

This resolves deadlocks of ftrace which will queue work from arbitrary
contexts, including those that have locks held that are needed for
raising a soft-irq.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---

Second try, looks much better so far. And it also removes my concerns
regarding other potential cases besides ftrace.

 kernel/irq_work.c | 26 ++++++++++----------------
 1 file changed, 10 insertions(+), 16 deletions(-)

diff --git a/kernel/irq_work.c b/kernel/irq_work.c
index 9dda38a..3f6ffcd 100644
--- a/kernel/irq_work.c
+++ b/kernel/irq_work.c
@@ -85,12 +85,9 @@ bool irq_work_queue_on(struct irq_work *work, int cpu)
 		raise_irqwork = llist_add(&work->llnode,
 					  &per_cpu(hirq_work_list, cpu));
 	else
-		raise_irqwork = llist_add(&work->llnode,
-					  &per_cpu(lazy_list, cpu));
-#else
+#endif
 		raise_irqwork = llist_add(&work->llnode,
 					  &per_cpu(raised_list, cpu));
-#endif
 
 	if (raise_irqwork)
 		arch_send_call_function_single_ipi(cpu);
@@ -114,21 +111,20 @@ bool irq_work_queue(struct irq_work *work)
 	if (work->flags & IRQ_WORK_HARD_IRQ) {
 		if (llist_add(&work->llnode, this_cpu_ptr(&hirq_work_list)))
 			arch_irq_work_raise();
-	} else {
+	} else
+#endif
+	if (work->flags & IRQ_WORK_LAZY) {
 		if (llist_add(&work->llnode, this_cpu_ptr(&lazy_list)) &&
 		    tick_nohz_tick_stopped())
+#ifdef CONFIG_PREEMPT_RT_FULL
 			raise_softirq(TIMER_SOFTIRQ);
-	}
 #else
-	if (work->flags & IRQ_WORK_LAZY) {
-		if (llist_add(&work->llnode, this_cpu_ptr(&lazy_list)) &&
-		    tick_nohz_tick_stopped())
 			arch_irq_work_raise();
+#endif
 	} else {
 		if (llist_add(&work->llnode, this_cpu_ptr(&raised_list)))
 			arch_irq_work_raise();
 	}
-#endif
 
 	preempt_enable();
 
@@ -202,6 +198,8 @@ void irq_work_run(void)
 {
 #ifdef CONFIG_PREEMPT_RT_FULL
 	irq_work_run_list(this_cpu_ptr(&hirq_work_list));
+	if (!llist_empty(this_cpu_ptr(&raised_list)))
+		raise_softirq(TIMER_SOFTIRQ);
 #else
 	irq_work_run_list(this_cpu_ptr(&raised_list));
 	irq_work_run_list(this_cpu_ptr(&lazy_list));
@@ -211,15 +209,11 @@ EXPORT_SYMBOL_GPL(irq_work_run);
 
 void irq_work_tick(void)
 {
-#ifdef CONFIG_PREEMPT_RT_FULL
-	irq_work_run_list(this_cpu_ptr(&lazy_list));
-#else
-	struct llist_head *raised = &__get_cpu_var(raised_list);
+	struct llist_head *raised = this_cpu_ptr(&raised_list);
 
 	if (!llist_empty(raised) && !arch_irq_work_has_interrupt())
 		irq_work_run_list(raised);
-	irq_work_run_list(&__get_cpu_var(lazy_list));
-#endif
+	irq_work_run_list(this_cpu_ptr(&lazy_list));
 }
 
 /*
-- 
2.1.4

  parent reply	other threads:[~2015-04-16 16:28 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-16 14:06 [PATCH RT 3.18] ring-buffer: Mark irq_work as HARD_IRQ to prevent deadlocks Jan Kiszka
2015-04-16 14:12 ` Steven Rostedt
2015-04-16 14:26 ` Sebastian Andrzej Siewior
2015-04-16 14:28   ` Jan Kiszka
2015-04-16 14:57     ` Sebastian Andrzej Siewior
2015-04-16 15:31       ` Jan Kiszka
2015-04-16 15:10     ` Steven Rostedt
2015-04-16 15:29       ` Jan Kiszka
2015-04-16 15:33         ` Sebastian Andrzej Siewior
2015-04-16 16:28         ` Jan Kiszka [this message]
2015-04-20  8:03           ` [PATCH RT 3.18] irq_work: Provide a soft-irq based queue Mike Galbraith
2015-04-23  6:11             ` Mike Galbraith
2015-04-23  6:29               ` Jan Kiszka
2015-04-23  6:58                 ` Mike Galbraith
2015-04-23  7:14                   ` Jan Kiszka
2015-04-23  6:50               ` Jan Kiszka
2015-04-23  7:01                 ` Mike Galbraith
2015-04-23  7:12                   ` Jan Kiszka
2015-04-23  7:12                     ` Jan Kiszka
2015-04-23  7:19                     ` Mike Galbraith
2015-04-23  7:19                       ` Mike Galbraith
2015-04-23 21:00                       ` Steven Rostedt
2015-04-24  6:54                         ` Mike Galbraith
2015-04-24  9:00                           ` Jan Kiszka
2015-04-24  9:59                             ` Mike Galbraith
2015-04-25  7:20                             ` Mike Galbraith
2015-04-25  7:26                               ` Jan Kiszka
2015-05-18 19:52                                 ` Sebastian Andrzej Siewior

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=552FE320.6050601@siemens.com \
    --to=jan.kiszka@siemens.com \
    --cc=bigeasy@linutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rt-users@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.