All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
To: Durgadoss R <durgadoss.r@intel.com>
Cc: intel-gfx@lists.freedesktop.org, ville.syrjala@intel.com,
	paulo.r.zanoni@intel.com
Subject: Re: [PATCH v3] drm/i915: Add debugfs to read/write any DPCD register
Date: Mon, 20 Apr 2015 18:33:43 +0530	[thread overview]
Message-ID: <5534F92F.10200@intel.com> (raw)
In-Reply-To: <1429529894-8771-1-git-send-email-durgadoss.r@intel.com>


[-- Attachment #1.1: Type: text/plain, Size: 5546 bytes --]

Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>


On 4/20/2015 5:08 PM, Durgadoss R wrote:
> This patch creates a connector specific debugfs
> interface to read any particular DPCD register.
> The DPCD register address (hex format) is written
> to 'i915_dpcd_addr' interface and the corresponding
> value can be read from 'i915_dpcd_val' interface.
>
> To write into a DPCD register, echo a value into
> 'i915_dpcd_val' interface. This will return -EIO
> for invalid writes.
>
> Example usage:
> echo 0x2 > i915_dpcd_addr
> cat i915_dpcd_val
> 0x84
>
> To write 0x1 to DPCD 0x170:
> echo 0x170 > i915_dpcd_addr
> echo 0x1 > i915_dpcd_val
> cat i915_dpcd_val
> 0x1
>
> v2: Address Jani's comments.
>
> v3: Added capability to write DPCD also (Ville)
>
> Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
> ---
>   drivers/gpu/drm/i915/i915_debugfs.c | 120 +++++++++++++++++++++++++++++++++++-
>   drivers/gpu/drm/i915/intel_drv.h    |   1 +
>   2 files changed, 120 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 9c2b9e4..79c876e 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -4968,6 +4968,119 @@ static const struct file_operations i915_dpcd_fops = {
>   	.release = single_release,
>   };
>   
> +static ssize_t i915_dpcd_addr_write(struct file *file, const char __user *ubuf,
> +				     size_t len, loff_t *offp)
> +{
> +	struct seq_file *m = file->private_data;
> +	struct drm_connector *connector = m->private;
> +	struct intel_dp *intel_dp =
> +		enc_to_intel_dp(&intel_attached_encoder(connector)->base);
> +	unsigned int reg_addr;
> +	char tmp[16];
> +
> +	if (len >= sizeof(tmp))
> +		return -EINVAL;
> +
> +	if (copy_from_user(tmp, ubuf, len))
> +		return -EFAULT;
> +
> +	tmp[len] = '\0';
> +
> +	if (kstrtouint(tmp, 16, &reg_addr))
> +		return -EINVAL;
> +
> +	intel_dp->debugfs_dpcd_addr = reg_addr;
> +
> +	return len;
> +}
> +
> +static int i915_dpcd_addr_show(struct seq_file *m, void *data)
> +{
> +	struct drm_connector *connector = m->private;
> +	struct intel_dp *intel_dp =
> +		enc_to_intel_dp(&intel_attached_encoder(connector)->base);
> +
> +	seq_printf(m, "0x%x\n", intel_dp->debugfs_dpcd_addr);
> +
> +	return 0;
> +}
> +
> +static int i915_dpcd_addr_open(struct inode *inode, struct file *file)
> +{
> +	return single_open(file, i915_dpcd_addr_show, inode->i_private);
> +}
> +
> +static const struct file_operations i915_dpcd_addr_fops = {
> +	.owner = THIS_MODULE,
> +	.open = i915_dpcd_addr_open,
> +	.read = seq_read,
> +	.write = i915_dpcd_addr_write,
> +	.llseek = seq_lseek,
> +	.release = single_release,
> +};
> +
> +static ssize_t i915_dpcd_val_write(struct file *file, const char __user *ubuf,
> +				     size_t len, loff_t *offp)
> +{
> +	struct seq_file *m = file->private_data;
> +	struct drm_connector *connector = m->private;
> +	struct intel_dp *intel_dp =
> +		enc_to_intel_dp(&intel_attached_encoder(connector)->base);
> +	unsigned int addr = intel_dp->debugfs_dpcd_addr;
> +	unsigned int val;
> +	char tmp[16];
> +	int ret;
> +
> +	if (len >= sizeof(tmp))
> +		return -EINVAL;
> +
> +	if (copy_from_user(tmp, ubuf, len))
> +		return -EFAULT;
> +
> +	tmp[len] = '\0';
> +
> +	if (kstrtouint(tmp, 16, &val))
> +		return -EINVAL;
> +
> +	ret = drm_dp_dpcd_writeb(&intel_dp->aux, addr, val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return len;
> +}
> +
> +static int i915_dpcd_val_show(struct seq_file *m, void *data)
> +{
> +	struct drm_connector *connector = m->private;
> +	struct intel_dp *intel_dp =
> +		enc_to_intel_dp(&intel_attached_encoder(connector)->base);
> +	unsigned int addr;
> +	u8 val;
> +	int ret;
> +
> +	addr = intel_dp->debugfs_dpcd_addr;
> +	ret = drm_dp_dpcd_readb(&intel_dp->aux, addr, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	seq_printf(m, "0x%x\n", val);
> +	return 0;
> +}
> +
> +static int i915_dpcd_val_open(struct inode *inode, struct file *file)
> +{
> +	return single_open(file, i915_dpcd_val_show, inode->i_private);
> +}
> +
> +static const struct file_operations i915_dpcd_val_fops = {
> +	.owner = THIS_MODULE,
> +	.open = i915_dpcd_val_open,
> +	.read = seq_read,
> +	.write = i915_dpcd_val_write,
> +	.llseek = seq_lseek,
> +	.release = single_release,
> +};
> +
>   /**
>    * i915_debugfs_connector_add - add i915 specific connector debugfs files
>    * @connector: pointer to a registered drm_connector
> @@ -4986,9 +5099,14 @@ int i915_debugfs_connector_add(struct drm_connector *connector)
>   		return -ENODEV;
>   
>   	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> -	    connector->connector_type == DRM_MODE_CONNECTOR_eDP)
> +	    connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
>   		debugfs_create_file("i915_dpcd", S_IRUGO, root, connector,
>   				    &i915_dpcd_fops);
> +		debugfs_create_file("i915_dpcd_addr", S_IRUGO | S_IWUSR,
> +				root, connector, &i915_dpcd_addr_fops);
> +		debugfs_create_file("i915_dpcd_val", S_IRUGO | S_IWUSR,
> +				root, connector, &i915_dpcd_val_fops);
> +	}
>   
>   	return 0;
>   }
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 23a42a4..4477d14 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -709,6 +709,7 @@ struct intel_dp {
>   	unsigned long last_power_cycle;
>   	unsigned long last_power_on;
>   	unsigned long last_backlight_off;
> +	unsigned int debugfs_dpcd_addr;
>   
>   	struct notifier_block edp_notifier;
>   


[-- Attachment #1.2: Type: text/html, Size: 5954 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-04-20 13:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-20 11:38 [PATCH v3] drm/i915: Add debugfs to read/write any DPCD register Durgadoss R
2015-04-20 13:03 ` Sivakumar Thulasimani [this message]
2015-04-20 14:36 ` shuang.he
2015-04-20 16:19 ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5534F92F.10200@intel.com \
    --to=sivakumar.thulasimani@intel.com \
    --cc=durgadoss.r@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    --cc=ville.syrjala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.