Re: [PATCH v7 0/3] Add ktd2692 Flash LED driver using LED Flash class

[Varka Bhadram <varkabhadram@gmail.com>]

On 04/23/2015 06:48 PM, Ingi Kim wrote:
> This patch adds ktd2692 Flash LED driver with LED Flash class
>
> Change in v7:
> 	- Add flash-max-microamp property for Flash LED
> 	- Change gpio-legacy interface to gpio consumer interface
>
> Change in v6 resend:
> 	- Adjust indent using checkpatch.pl script with strict option
>
> Change in v6:
> 	- Change goto label to if-else
> 	- Change DT binding style for LED device binding
>
> Change in v5:
> 	- Clean up the code
> 	- Fix help message of Kconfig
> 	- Fix issue related with regulator and mutex usage
> 	- Remove tab spaces in bindings
>
> Change in v4:
> 	- Clean up the code
> 	- Modify binding documentation of ktd2692
>
> Change in v3:
> 	- Clean up the code
> 	- Add aux gpio pin to control Flash LED
>
> Change in v2:
> 	- Introduction of LED Flash class as Jacek's comment
> 	- Supplement of binding documentation
> 	- Rename gpio control pin and remove unused pin
> 	- Add regulator for the Flash LED
>
> Ingi Kim (3):
>   of: Add vendor prefix for Kinetic technologies
>   leds: ktd2692: add device tree bindings for ktd2692
>   leds: Add ktd2692 flash LED driver
>
>  .../devicetree/bindings/leds/leds-ktd2692.txt      |  47 +++
>  .../devicetree/bindings/vendor-prefixes.txt        |   1 +
>  drivers/leds/Kconfig                               |   9 +
>  drivers/leds/Makefile                              |   1 +
>  drivers/leds/leds-ktd2692.c                        | 435 +++++++++++++++++++++
>  5 files changed, 493 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
>  create mode 100644 drivers/leds/leds-ktd2692.c
>
Reviewed-by: Varka Bhadram <varkabhadram@gmail.com>

Thanks

-- 
Varka Bhadram