From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 8/8] sunxi: ehci: Convert to the driver-model
Date: Fri, 01 May 2015 10:37:19 +0200 [thread overview]
Message-ID: <55433B3F.9010709@redhat.com> (raw)
In-Reply-To: <CAPnjgZ1sdv_gK21_hpA1o5uxzgiiT+px-27orMrmWLxWC+jWew@mail.gmail.com>
Hi,
On 01-05-15 06:12, Simon Glass wrote:
> Hi Hans,
>
> On 30 April 2015 at 08:35, Hans de Goede <hdegoede@redhat.com> wrote:
>> Convert sunxi-boards which use the sunxi-ehci code to the driver-model.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> board/sunxi/Kconfig | 3 ++
>> drivers/usb/host/ehci-sunxi.c | 95 ++++++++++++++++++++++++++++++-------------
>> 2 files changed, 69 insertions(+), 29 deletions(-)
>
> A few nits, but otherwise:
>
> Acked-by: Simon Glass <sjg@chromium.org>
>
>>
>> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
>> index 18e5561..6dcbff3 100644
>> --- a/board/sunxi/Kconfig
>> +++ b/board/sunxi/Kconfig
>> @@ -559,4 +559,7 @@ config DM_ETH
>> config DM_SERIAL
>> default y
>>
>> +config DM_USB
>> + default y if !USB_MUSB_SUNXI
>> +
>> endif
>> diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
>> index 0edb643..9c6703c 100644
>> --- a/drivers/usb/host/ehci-sunxi.c
>> +++ b/drivers/usb/host/ehci-sunxi.c
>> @@ -14,53 +14,90 @@
>> #include <asm/arch/clock.h>
>> #include <asm/arch/usb_phy.h>
>> #include <asm/io.h>
>> +#include <dm.h>
>> #include "ehci.h"
>>
>> -int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
>> - struct ehci_hcor **hcor)
>> +struct ehci_sunxi_priv {
>> + struct ehci_ctrl ehci;
>
> Comment for these two: ?
>
>> + int ahb_gate_mask;
>> + int phy_index;
>> +};
>> +
>> +static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
>> +{
>> + return 0;
>
> Maybe can drop this function if not used? Or do you plan to use it later?
Both are fixed in my sunxi tree now.
Regards,
Hans
>
>> +}
>> +
>> +static int ehci_usb_probe(struct udevice *dev)
>> {
>> struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
>> - int ahb_gate_offset;
>> + struct usb_platdata *plat = dev_get_platdata(dev);
>> + struct ehci_sunxi_priv *priv = dev_get_priv(dev);
>> + struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev);
>> + struct ehci_hcor *hcor;
>> +
>> + if (hccr == (void *)SUNXI_USB1_BASE) {
>> + priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
>> + priv->phy_index = 1;
>> + } else {
>> + priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1;
>> + priv->phy_index = 2;
>> + }
>>
>> - ahb_gate_offset = index ? AHB_GATE_OFFSET_USB_EHCI1 :
>> - AHB_GATE_OFFSET_USB_EHCI0;
>> - setbits_le32(&ccm->ahb_gate0, 1 << ahb_gate_offset);
>> + setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
>> #ifdef CONFIG_SUNXI_GEN_SUN6I
>> - setbits_le32(&ccm->ahb_reset0_cfg, 1 << ahb_gate_offset);
>> + setbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
>> #endif
>>
>> - sunxi_usb_phy_init(index + 1);
>> - sunxi_usb_phy_power_on(index + 1);
>> + sunxi_usb_phy_init(priv->phy_index);
>> + sunxi_usb_phy_power_on(priv->phy_index);
>>
>> - if (index == 0)
>> - *hccr = (void *)SUNXI_USB1_BASE;
>> - else
>> - *hccr = (void *)SUNXI_USB2_BASE;
>> + hcor = (struct ehci_hcor *)((uint32_t)hccr +
>> + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
>>
>> - *hcor = (struct ehci_hcor *)((uint32_t) *hccr
>> - + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
>> -
>> - debug("sunxi-ehci: init hccr %x and hcor %x hc_length %d\n",
>> - (uint32_t)*hccr, (uint32_t)*hcor,
>> - (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
>> -
>> - return 0;
>> + return ehci_register(dev, hccr, hcor, NULL, 0, plat->init_type);
>> }
>>
>> -int ehci_hcd_stop(int index)
>> +static int ehci_usb_remove(struct udevice *dev)
>> {
>> struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
>> - int ahb_gate_offset;
>> + struct ehci_sunxi_priv *priv = dev_get_priv(dev);
>> + int ret;
>>
>> - sunxi_usb_phy_power_off(index + 1);
>> - sunxi_usb_phy_exit(index + 1);
>> + ret = ehci_deregister(dev);
>> + if (ret)
>> + return ret;
>> +
>> + sunxi_usb_phy_power_off(priv->phy_index);
>> + sunxi_usb_phy_exit(priv->phy_index);
>>
>> - ahb_gate_offset = index ? AHB_GATE_OFFSET_USB_EHCI1 :
>> - AHB_GATE_OFFSET_USB_EHCI0;
>> #ifdef CONFIG_SUNXI_GEN_SUN6I
>> - clrbits_le32(&ccm->ahb_reset0_cfg, 1 << ahb_gate_offset);
>> + clrbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
>> #endif
>> - clrbits_le32(&ccm->ahb_gate0, 1 << ahb_gate_offset);
>> + clrbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
>>
>> return 0;
>> }
>> +
>> +static const struct udevice_id ehci_usb_ids[] = {
>> + { .compatible = "allwinner,sun4i-a10-ehci", },
>> + { .compatible = "allwinner,sun5i-a13-ehci", },
>> + { .compatible = "allwinner,sun6i-a31-ehci", },
>> + { .compatible = "allwinner,sun7i-a20-ehci", },
>> + { .compatible = "allwinner,sun8i-a23-ehci", },
>> + { .compatible = "allwinner,sun9i-a80-ehci", },
>> + { }
>> +};
>> +
>> +U_BOOT_DRIVER(usb_ehci) = {
>> + .name = "ehci_sunxi",
>> + .id = UCLASS_USB,
>> + .of_match = ehci_usb_ids,
>> + .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
>> + .probe = ehci_usb_probe,
>> + .remove = ehci_usb_remove,
>> + .ops = &ehci_usb_ops,
>> + .platdata_auto_alloc_size = sizeof(struct usb_platdata),
>> + .priv_auto_alloc_size = sizeof(struct ehci_sunxi_priv),
>> + .flags = DM_FLAG_ALLOC_PRIV_DMA,
>> +};
>> --
>> 2.3.6
>>
>
> Regards,
> Simon
>
next prev parent reply other threads:[~2015-05-01 8:37 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-30 14:35 [U-Boot] [PATCH 0/8] usb: driver-model fixes and dm support sunxi-ehci.c Hans de Goede
2015-04-30 14:35 ` [U-Boot] [PATCH 1/8] dm: usb: Copy over usb_device values from usb_scan_device() to final usb_device Hans de Goede
2015-05-01 4:11 ` Simon Glass
2015-05-01 7:21 ` Hans de Goede
2015-05-01 8:03 ` Hans de Goede
2015-04-30 14:35 ` [U-Boot] [PATCH 2/8] dm: usb: Use controller_dev in dm ehci code Hans de Goede
2015-05-01 4:11 ` Simon Glass
2015-05-01 8:03 ` Hans de Goede
2015-04-30 14:35 ` [U-Boot] [PATCH 3/8] dm: usb: Store usb_device parent pointer in usb_device Hans de Goede
2015-05-01 4:11 ` Simon Glass
2015-05-01 8:26 ` Hans de Goede
2015-04-30 14:35 ` [U-Boot] [PATCH 4/8] dm: usb: Set desc_before_addr from ehci dm code Hans de Goede
2015-05-01 4:12 ` Simon Glass
2015-04-30 14:35 ` [U-Boot] [PATCH 5/8] dm: usb: Add support for interrupt queues to the dm usb code Hans de Goede
2015-05-01 4:12 ` Simon Glass
2015-04-30 14:35 ` [U-Boot] [PATCH 6/8] dm: usb: Prefix ehci interrupt-queue functions with _ehci_ Hans de Goede
2015-05-01 4:12 ` Simon Glass
2015-04-30 14:35 ` [U-Boot] [PATCH 7/8] dm: usb: Add support for interrupt queues to the dm ehci code Hans de Goede
2015-05-01 4:12 ` Simon Glass
2015-04-30 14:35 ` [U-Boot] [PATCH 8/8] sunxi: ehci: Convert to the driver-model Hans de Goede
2015-05-01 4:12 ` Simon Glass
2015-05-01 8:37 ` Hans de Goede [this message]
2015-05-02 14:03 ` Ian Campbell
2015-05-02 14:04 ` Ian Campbell
2015-05-04 14:16 ` Hans de Goede
2015-04-30 14:39 ` [U-Boot] [PATCH 0/8] usb: driver-model fixes and dm support sunxi-ehci.c Hans de Goede
2015-04-30 14:48 ` Simon Glass
2015-04-30 19:38 ` Hans de Goede
2015-04-30 22:04 ` Simon Glass
2015-05-01 7:17 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55433B3F.9010709@redhat.com \
--to=hdegoede@redhat.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.