diff for duplicates of <5547D5BA.5070407@tronnes.org> diff --git a/a/1.txt b/N1/1.txt index 7a4831a..4b510b5 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -33,7 +33,7 @@ Den 04.05.2015 21:33, skrev Eric Anholt: > BUS_OFFSET in arch/arm/mach-bcm2708/include/mach/memory.h). > > Signed-off-by: Eric Anholt <eric@anholt.net> -> Cc: popcornmix at gmail.com +> Cc: popcornmix@gmail.com > --- > arch/arm/boot/dts/bcm2835.dtsi | 1 + > 1 file changed, 1 insertion(+) @@ -48,7 +48,7 @@ Den 04.05.2015 21:33, skrev Eric Anholt: > ranges = <0x7e000000 0x20000000 0x02000000>; > + dma-ranges = <0x40000000 0x00000000 0x1f000000>; > -> timer at 7e003000 { +> timer@7e003000 { > compatible = "brcm,bcm2835-system-timer"; This was quite a coincidence. I discovered the need for 'dma-ranges' @@ -61,8 +61,8 @@ What I don't understand, is that mmc and spi works fine with a "wrong" bus address. It's only the framebuffer driver and the vchiq driver when using mailbox that fails. -Tested-by: Noralf Tr?nnes <noralf@tronnes.org> +Tested-by: Noralf Trønnes <noralf@tronnes.org> Regards, -Noralf Tr?nnes +Noralf Trønnes diff --git a/a/content_digest b/N1/content_digest index 33d5204..b28d3f7 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,8 +1,11 @@ "ref\01430768034-12734-1-git-send-email-eric@anholt.net\0" - "From\0noralf@tronnes.org (Noralf Tr\303\270nnes)\0" - "Subject\0[PATCH] ARM: bcm2835: Use 0x4 prefix for DMA bus addresses to SDRAM.\0" + "From\0Noralf Tr\303\270nnes <noralf@tronnes.org>\0" + "Subject\0Re: [PATCH] ARM: bcm2835: Use 0x4 prefix for DMA bus addresses to SDRAM.\0" "Date\0Mon, 04 May 2015 22:25:30 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Eric Anholt <eric@anholt.net>" + " linux-arm-kernel@lists.infradead.org\0" + "Cc\0linux-kernel@vger.kernel.org" + " linux-rpi-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "\n" @@ -40,7 +43,7 @@ "> BUS_OFFSET in arch/arm/mach-bcm2708/include/mach/memory.h).\n" ">\n" "> Signed-off-by: Eric Anholt <eric@anholt.net>\n" - "> Cc: popcornmix at gmail.com\n" + "> Cc: popcornmix@gmail.com\n" "> ---\n" "> arch/arm/boot/dts/bcm2835.dtsi | 1 +\n" "> 1 file changed, 1 insertion(+)\n" @@ -55,7 +58,7 @@ "> \t\tranges = <0x7e000000 0x20000000 0x02000000>;\n" "> +\t\tdma-ranges = <0x40000000 0x00000000 0x1f000000>;\n" "> \n" - "> \t\ttimer at 7e003000 {\n" + "> \t\ttimer@7e003000 {\n" "> \t\t\tcompatible = \"brcm,bcm2835-system-timer\";\n" "\n" "This was quite a coincidence. I discovered the need for 'dma-ranges'\n" @@ -68,10 +71,10 @@ "bus address. It's only the framebuffer driver and the vchiq driver\n" "when using mailbox that fails.\n" "\n" - "Tested-by: Noralf Tr?nnes <noralf@tronnes.org>\n" + "Tested-by: Noralf Tr\303\270nnes <noralf@tronnes.org>\n" "\n" "\n" "Regards,\n" - Noralf Tr?nnes + "Noralf Tr\303\270nnes" -d1780e2d459c2bac43f70156d9965a1baf43af505975feca85e48f943c15d612 +9b10680744ad04bef3f01b6a9b32b207234e23c2d181940de5afc0b4c4eb135c
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.