From: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/2] drm/i915/dp: there is no audio on port A on non-DDI platforms
Date: Tue, 05 May 2015 19:08:31 +0530 [thread overview]
Message-ID: <5548C7D7.4020908@intel.com> (raw)
In-Reply-To: <87mw1j6tgj.fsf@intel.com>
sure, you can check for port A alone then. DDI A will have edp in all
SKUs so checking for eDP should ideally be the same as DDIA.
On 5/5/2015 7:02 PM, Jani Nikula wrote:
> On Tue, 05 May 2015, Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> wrote:
>> two points
>> 1) The eDP spec says Audio is optional so it is allowed to have audio,
>> but i am yet to come across any eDP panel that supports Audio.
>> 2) Also, there is no support for audio in DDI A port as well :)
>>
>> So please change the check to
>>
>> if (!is_edp(encoder))
> Because the actual limitation we have is "no audio on port A" instead of
> "no audio on eDP", I insist we check for port A. Patch below.
>
> BR,
> Jani.
>
>
> From ca5d2444065ac91db3ad6cfcdbf8a012a4d44556 Mon Sep 17 00:00:00 2001
> From: Jani Nikula <jani.nikula@intel.com>
> Date: Thu, 9 Apr 2015 12:41:53 +0300
> Subject: [PATCH] drm/i915/dp: there is no audio on port A
> Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
> Cc: Jani Nikula <jani.nikula@intel.com>
>
> The eDP port A register on PCH split platforms has a slightly different
> register layout from the other ports, with bit 6 being either alternate
> scrambler reset or reserved, depending on the generation. Our
> misinterpretation of the bit as audio has lead to warning.
>
> Fix this by not enabling audio on port A, since none of our platforms
> support audio on port A anyway.
>
> v2: DDI doesn't have audio on port A either (Sivakumar Thulasimani)
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958
> Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
> Cc: stable@vger.kernel.org
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index caeb6ed99ad2..b61bf9b2f76f 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1361,7 +1361,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>
> pipe_config->has_dp_encoder = true;
> pipe_config->has_drrs = false;
> - pipe_config->has_audio = intel_dp->has_audio;
> + pipe_config->has_audio = intel_dp->has_audio && port != PORT_A;
>
> if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
> intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
> @@ -2234,8 +2234,8 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
> int dotclock;
>
> tmp = I915_READ(intel_dp->output_reg);
> - if (tmp & DP_AUDIO_OUTPUT_ENABLE)
> - pipe_config->has_audio = true;
> +
> + pipe_config->has_audio = tmp & DP_AUDIO_OUTPUT_ENABLE && port != PORT_A;
>
> if ((port == PORT_A) || !HAS_PCH_CPT(dev)) {
> if (tmp & DP_SYNC_HS_HIGH)
--
regards,
Sivakumar
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-05-05 13:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-04 14:20 [PATCH 1/2] drm/i915/dp: there is no audio on port A on non-DDI platforms Jani Nikula
2015-05-04 14:20 ` [PATCH 2/2] drm/i915/audio: do not mess with audio registers if port is invalid Jani Nikula
2015-05-04 20:45 ` shuang.he
2015-05-05 5:33 ` Sivakumar Thulasimani
2015-05-06 11:11 ` Daniel Vetter
2015-05-05 5:31 ` [PATCH 1/2] drm/i915/dp: there is no audio on port A on non-DDI platforms Sivakumar Thulasimani
2015-05-05 9:09 ` Jani Nikula
2015-05-05 12:18 ` Sivakumar Thulasimani
2015-05-05 13:32 ` Jani Nikula
2015-05-05 13:38 ` Sivakumar Thulasimani [this message]
2015-05-05 13:43 ` Sivakumar Thulasimani
2015-05-06 9:30 ` Jani Nikula
2015-05-06 11:11 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5548C7D7.4020908@intel.com \
--to=sivakumar.thulasimani@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.