Hi

I was on irc a few days ago trying to get the new amdgpu driver up and
running on my system. I am able to get the kernel booted successfully,
however X via amdgpu is turning out to be a real roadblock. It is the
problem with amdgpu_drv.so seeing gbm_create_device as an undefined
symbol. From what little I understand, I may be needing a more recent
xserver to resolve this...

But even with a non-working X for amdgpu, I'm still seeing some issues
with the amdgpu kernel driver:

- booting with dual displays is a problem for me. On boot, the display
connected to the DVI-I port seems to get stuck in a loop of attempting
to acquire a signal. (The 'DVI No Signal' overlay message flashes and
screen blanks repeatedly with no actual output ever displayed) So far
I've only connected displays to the two DVI ports (DVI-D and DVI-I)

- xen boot hard locks the system with no ssh access

Understandably, AMDGPU has only recently been released, and hopefully
you folks are already aware of these problems. But if not, I thought I
would chime in with some user feedback.

Attached should be my dmesg if needed

Many thanks to the people working on this! :)