diff for duplicates of <554A1B78.2030305@free-electrons.com> diff --git a/a/1.txt b/N1/1.txt index ffd9a1c..f4e3f87 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -13,7 +13,7 @@ On 06/05/2015 15:14, Imre Kaloz wrote: > - 128MB NAND flash > - 512MB RAM > -> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> +> Signed-off-by: Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> > > --- > arch/arm/boot/dts/Makefile | 2 + @@ -47,7 +47,7 @@ On 06/05/2015 15:14, Imre Kaloz wrote: > +/* > + * Device Tree include for the Linksys WRT1200AC (Caiman) > + * -> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> +> + * Copyright (C) 2015 Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> > + * > + * > + * This file is dual-licensed: you can use it either under the terms @@ -93,53 +93,53 @@ On 06/05/2015 15:14, Imre Kaloz wrote: > + > + soc { > + internal-regs{ -> + i2c at 11000 { +> + i2c@11000 { > + -> + pca9635 at 68 { +> + pca9635@68 { > + #address-cells = <1>; > + #size-cells = <0>; > + -> + wan_amber at 0 { +> + wan_amber@0 { > + label = "caiman:amber:wan"; > + reg = <0x0>; > + }; > + -> + wan_white at 1 { +> + wan_white@1 { > + label = "caiman:white:wan"; > + reg = <0x1>; > + }; > + -> + wlan_2g at 2 { +> + wlan_2g@2 { > + label = "caiman:white:wlan_2g"; > + reg = <0x2>; > + }; > + -> + wlan_5g at 3 { +> + wlan_5g@3 { > + label = "caiman:white:wlan_5g"; > + reg = <0x3>; > + }; > + -> + usb2 at 5 { +> + usb2@5 { > + label = "caiman:white:usb2"; > + reg = <0x5>; > + }; > + -> + usb3_1 at 6 { +> + usb3_1@6 { > + label = "caiman:white:usb3_1"; > + reg = <0x6>; > + }; > + -> + usb3_2 at 7 { +> + usb3_2@7 { > + label = "caiman:white:usb3_2"; > + reg = <0x7>; > + }; > + -> + wps_white at 8 { +> + wps_white@8 { > + label = "caiman:white:wps"; > + reg = <0x8>; > + }; > + -> + wps_amber at 9 { +> + wps_amber@9 { > + label = "caiman:amber:wps"; > + reg = <0x9>; > + }; @@ -167,7 +167,7 @@ On 06/05/2015 15:14, Imre Kaloz wrote: > +/* > + * Device Tree file for the Linksys WRT1900ACv2 (Cobra) > + * -> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> +> + * Copyright (C) 2015 Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> > + * > + * > + * This file is dual-licensed: you can use it either under the terms @@ -213,53 +213,53 @@ On 06/05/2015 15:14, Imre Kaloz wrote: > + > + soc { > + internal-regs{ -> + i2c at 11000 { +> + i2c@11000 { > + -> + pca9635 at 68 { +> + pca9635@68 { > + #address-cells = <1>; > + #size-cells = <0>; > + -> + wan_amber at 0 { +> + wan_amber@0 { > + label = "cobra:amber:wan"; > + reg = <0x0>; > + }; > + -> + wan_white at 1 { +> + wan_white@1 { > + label = "cobra:white:wan"; > + reg = <0x1>; > + }; > + -> + wlan_2g at 2 { +> + wlan_2g@2 { > + label = "cobra:white:wlan_2g"; > + reg = <0x2>; > + }; > + -> + wlan_5g at 3 { +> + wlan_5g@3 { > + label = "cobra:white:wlan_5g"; > + reg = <0x3>; > + }; > + -> + usb2 at 5 { +> + usb2@5 { > + label = "cobra:white:usb2"; > + reg = <0x5>; > + }; > + -> + usb3_1 at 6 { +> + usb3_1@6 { > + label = "cobra:white:usb3_1"; > + reg = <0x6>; > + }; > + -> + usb3_2 at 7 { +> + usb3_2@7 { > + label = "cobra:white:usb3_2"; > + reg = <0x7>; > + }; > + -> + wps_white at 8 { +> + wps_white@8 { > + label = "cobra:white:wps"; > + reg = <0x8>; > + }; > + -> + wps_amber at 9 { +> + wps_amber@9 { > + label = "cobra:amber:wps"; > + reg = <0x9>; > + }; @@ -287,7 +287,7 @@ On 06/05/2015 15:14, Imre Kaloz wrote: > +/* > + * Device Tree include file for Armada 385 based Linksys boards > + * -> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> +> + * Copyright (C) 2015 Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> > + * > + * > + * This file is dual-licensed: you can use it either under the terms @@ -357,21 +357,21 @@ Gregory > + > + internal-regs { > + -> + spi at 10600 { +> + spi@10600 { > + status = "disabled"; > + }; > + -> + i2c at 11000 { +> + i2c@11000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins>; > + status = "okay"; > + -> + tmp421 at 4c { +> + tmp421@4c { > + compatible = "ti,tmp421"; > + reg = <0x4c>; > + }; > + -> + pca9635 at 68 { +> + pca9635@68 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "nxp,pca9635"; @@ -380,11 +380,11 @@ Gregory > + }; > + > + /* J10: VCC, NC, RX, NC, TX, GND */ -> + serial at 12000 { +> + serial@12000 { > + status = "okay"; > + }; > + -> + ethernet at 70000 { +> + ethernet@70000 { > + status = "okay"; > + phy-mode = "rgmii-id"; > + fixed-link { @@ -393,7 +393,7 @@ Gregory > + }; > + }; > + -> + ethernet at 34000 { +> + ethernet@34000 { > + status = "okay"; > + phy-mode = "sgmii"; > + fixed-link { @@ -406,67 +406,67 @@ Gregory > + status = "okay"; > + }; > + -> + sata at a8000 { +> + sata@a8000 { > + status = "okay"; > + }; > + > + /* USB part of the eSATA/USB 2.0 port */ -> + usb at 50000 { +> + usb@50000 { > + status = "okay"; > + }; > + -> + usb3 at f8000 { +> + usb3@f8000 { > + status = "okay"; > + usb-phy = <&usb3_phy>; > + }; > + -> + flash at d0000 { +> + flash@d0000 { > + status = "okay"; > + num-cs = <1>; > + marvell,nand-keep-config; > + marvell,nand-enable-arbiter; > + nand-on-flash-bbt; > + -> + partition at 0 { +> + partition@0 { > + label = "u-boot"; > + reg = <0x0000000 0x200000>; /* 2MB */ > + read-only; > + }; > + -> + partition at 100000 { +> + partition@100000 { > + label = "u_env"; > + reg = <0x200000 0x40000>; /* 256KB */ > + }; > + -> + partition at 140000 { +> + partition@140000 { > + label = "s_env"; > + reg = <0x240000 0x40000>; /* 256KB */ > + }; > + -> + partition at 900000 { +> + partition@900000 { > + label = "devinfo"; > + reg = <0x900000 0x100000>; /* 1MB */ > + read-only; > + }; > + > + /* kernel1 overlaps with rootfs1 by design */ -> + partition at a00000 { +> + partition@a00000 { > + label = "kernel1"; > + reg = <0xa00000 0x2800000>; /* 40MB */ > + }; > + -> + partition at 1000000 { +> + partition@1000000 { > + label = "rootfs1"; > + reg = <0x1000000 0x2200000>; /* 34MB */ > + }; > + > + /* kernel2 overlaps with rootfs2 by design */ -> + partition at 3200000 { +> + partition@3200000 { > + label = "kernel2"; > + reg = <0x3200000 0x2800000>; /* 40MB */ > + }; > + -> + partition at 3800000 { +> + partition@3800000 { > + label = "rootfs2"; > + reg = <0x3800000 0x2200000>; /* 34MB */ > + }; @@ -474,7 +474,7 @@ Gregory > + /* > + * 38MB, last MB is for the BBT, not writable > + */ -> + partition at 5a00000 { +> + partition@5a00000 { > + label = "syscfg"; > + reg = <0x5a00000 0x2600000>; > + }; @@ -485,7 +485,7 @@ Gregory > + * partitions would break the bootloader > + * supplied bootargs > + */ -> + partition at 180000 { +> + partition@180000 { > + label = "unused_area"; > + reg = <0x280000 0x680000>; /* 6.5MB */ > + }; @@ -495,12 +495,12 @@ Gregory > + pcie-controller { > + status = "okay"; > + -> + pcie at 1,0 { +> + pcie@1,0 { > + /* Marvell 88W8864, 5GHz-only */ > + status = "okay"; > + }; > + -> + pcie at 2,0 { +> + pcie@2,0 { > + /* Marvell 88W8864, 2GHz-only */ > + status = "okay"; > + }; @@ -530,13 +530,13 @@ Gregory > + pinctrl-0 = <&keys_pin>; > + pinctrl-names = "default"; > + -> + button at 1 { +> + button@1 { > + label = "WPS"; > + linux,code = <KEY_WPS_BUTTON>; > + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; > + }; > + -> + button at 2 { +> + button@2 { > + label = "Factory Reset Button"; > + linux,code = <KEY_RESTART>; > + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; @@ -589,3 +589,7 @@ Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 30639f2..8c386d2 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,9 +1,15 @@ "ref\01430918040-17307-1-git-send-email-kaloz@openwrt.org\0" "ref\01430918040-17307-3-git-send-email-kaloz@openwrt.org\0" - "From\0gregory.clement@free-electrons.com (Gregory CLEMENT)\0" - "Subject\0[PATCH 2/2] ARM: mvebu: add support for the new Armada 385 based Linksys boards\0" + "ref\01430918040-17307-3-git-send-email-kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org\0" + "From\0Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Subject\0Re: [PATCH 2/2] ARM: mvebu: add support for the new Armada 385 based Linksys boards\0" "Date\0Wed, 06 May 2015 15:47:36 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>\0" + "Cc\0linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org + thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org + " andrew-g2DYL2Zd6BY@public.gmane.org\0" "\00:1\0" "b\0" "Hi Imre,\n" @@ -21,7 +27,7 @@ "> - 128MB NAND flash\n" "> - 512MB RAM\n" "> \n" - "> Signed-off-by: Imre Kaloz <kaloz@openwrt.org>\n" + "> Signed-off-by: Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>\n" "> \n" "> ---\n" "> arch/arm/boot/dts/Makefile | 2 +\n" @@ -55,7 +61,7 @@ "> +/*\n" "> + * Device Tree include for the Linksys WRT1200AC (Caiman)\n" "> + *\n" - "> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>\n" + "> + * Copyright (C) 2015 Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>\n" "> + *\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" @@ -101,53 +107,53 @@ "> +\n" "> +\tsoc {\n" "> +\t\tinternal-regs{\n" - "> +\t\t\ti2c at 11000 {\n" + "> +\t\t\ti2c@11000 {\n" "> +\n" - "> +\t\t\t\tpca9635 at 68 {\n" + "> +\t\t\t\tpca9635@68 {\n" "> +\t\t\t\t#address-cells = <1>;\n" "> +\t\t\t\t#size-cells = <0>;\n" "> +\n" - "> +\t\t\t\t\twan_amber at 0 {\n" + "> +\t\t\t\t\twan_amber@0 {\n" "> +\t\t\t\t\t\tlabel = \"caiman:amber:wan\";\n" "> +\t\t\t\t\t\treg = <0x0>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\twan_white at 1 {\n" + "> +\t\t\t\t\twan_white@1 {\n" "> +\t\t\t\t\t\tlabel = \"caiman:white:wan\";\n" "> +\t\t\t\t\t\treg = <0x1>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\twlan_2g at 2 {\n" + "> +\t\t\t\t\twlan_2g@2 {\n" "> +\t\t\t\t\t\tlabel = \"caiman:white:wlan_2g\";\n" "> +\t\t\t\t\t\treg = <0x2>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\twlan_5g at 3 {\n" + "> +\t\t\t\t\twlan_5g@3 {\n" "> +\t\t\t\t\t\tlabel = \"caiman:white:wlan_5g\";\n" "> +\t\t\t\t\t\treg = <0x3>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\tusb2 at 5 {\n" + "> +\t\t\t\t\tusb2@5 {\n" "> +\t\t\t\t\t\tlabel = \"caiman:white:usb2\";\n" "> +\t\t\t\t\t\treg = <0x5>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\tusb3_1 at 6 {\n" + "> +\t\t\t\t\tusb3_1@6 {\n" "> +\t\t\t\t\t\tlabel = \"caiman:white:usb3_1\";\n" "> +\t\t\t\t\t\treg = <0x6>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\tusb3_2 at 7 {\n" + "> +\t\t\t\t\tusb3_2@7 {\n" "> +\t\t\t\t\t\tlabel = \"caiman:white:usb3_2\";\n" "> +\t\t\t\t\t\treg = <0x7>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\twps_white at 8 {\n" + "> +\t\t\t\t\twps_white@8 {\n" "> +\t\t\t\t\t\tlabel = \"caiman:white:wps\";\n" "> +\t\t\t\t\t\treg = <0x8>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\twps_amber at 9 {\n" + "> +\t\t\t\t\twps_amber@9 {\n" "> +\t\t\t\t\t\tlabel = \"caiman:amber:wps\";\n" "> +\t\t\t\t\t\treg = <0x9>;\n" "> +\t\t\t\t\t};\n" @@ -175,7 +181,7 @@ "> +/*\n" "> + * Device Tree file for the Linksys WRT1900ACv2 (Cobra)\n" "> + *\n" - "> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>\n" + "> + * Copyright (C) 2015 Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>\n" "> + *\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" @@ -221,53 +227,53 @@ "> +\n" "> +\tsoc {\n" "> +\t\tinternal-regs{\n" - "> +\t\t\ti2c at 11000 {\n" + "> +\t\t\ti2c@11000 {\n" "> +\n" - "> +\t\t\t\tpca9635 at 68 {\n" + "> +\t\t\t\tpca9635@68 {\n" "> +\t\t\t\t#address-cells = <1>;\n" "> +\t\t\t\t#size-cells = <0>;\n" "> +\n" - "> +\t\t\t\t\twan_amber at 0 {\n" + "> +\t\t\t\t\twan_amber@0 {\n" "> +\t\t\t\t\t\tlabel = \"cobra:amber:wan\";\n" "> +\t\t\t\t\t\treg = <0x0>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\twan_white at 1 {\n" + "> +\t\t\t\t\twan_white@1 {\n" "> +\t\t\t\t\t\tlabel = \"cobra:white:wan\";\n" "> +\t\t\t\t\t\treg = <0x1>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\twlan_2g at 2 {\n" + "> +\t\t\t\t\twlan_2g@2 {\n" "> +\t\t\t\t\t\tlabel = \"cobra:white:wlan_2g\";\n" "> +\t\t\t\t\t\treg = <0x2>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\twlan_5g at 3 {\n" + "> +\t\t\t\t\twlan_5g@3 {\n" "> +\t\t\t\t\t\tlabel = \"cobra:white:wlan_5g\";\n" "> +\t\t\t\t\t\treg = <0x3>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\tusb2 at 5 {\n" + "> +\t\t\t\t\tusb2@5 {\n" "> +\t\t\t\t\t\tlabel = \"cobra:white:usb2\";\n" "> +\t\t\t\t\t\treg = <0x5>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\tusb3_1 at 6 {\n" + "> +\t\t\t\t\tusb3_1@6 {\n" "> +\t\t\t\t\t\tlabel = \"cobra:white:usb3_1\";\n" "> +\t\t\t\t\t\treg = <0x6>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\tusb3_2 at 7 {\n" + "> +\t\t\t\t\tusb3_2@7 {\n" "> +\t\t\t\t\t\tlabel = \"cobra:white:usb3_2\";\n" "> +\t\t\t\t\t\treg = <0x7>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\twps_white at 8 {\n" + "> +\t\t\t\t\twps_white@8 {\n" "> +\t\t\t\t\t\tlabel = \"cobra:white:wps\";\n" "> +\t\t\t\t\t\treg = <0x8>;\n" "> +\t\t\t\t\t};\n" "> +\n" - "> +\t\t\t\t\twps_amber at 9 {\n" + "> +\t\t\t\t\twps_amber@9 {\n" "> +\t\t\t\t\t\tlabel = \"cobra:amber:wps\";\n" "> +\t\t\t\t\t\treg = <0x9>;\n" "> +\t\t\t\t\t};\n" @@ -295,7 +301,7 @@ "> +/*\n" "> + * Device Tree include file for Armada 385 based Linksys boards\n" "> + *\n" - "> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>\n" + "> + * Copyright (C) 2015 Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>\n" "> + *\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" @@ -365,21 +371,21 @@ "> +\n" "> +\t\tinternal-regs {\n" "> +\n" - "> +\t\t\tspi at 10600 {\n" + "> +\t\t\tspi@10600 {\n" "> +\t\t\t\tstatus = \"disabled\";\n" "> +\t\t\t};\n" "> +\n" - "> +\t\t\ti2c at 11000 {\n" + "> +\t\t\ti2c@11000 {\n" "> +\t\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\t\tpinctrl-0 = <&i2c0_pins>;\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\n" - "> +\t\t\t\ttmp421 at 4c {\n" + "> +\t\t\t\ttmp421@4c {\n" "> +\t\t\t\t\tcompatible = \"ti,tmp421\";\n" "> +\t\t\t\t\treg = <0x4c>;\n" "> +\t\t\t\t};\n" "> +\n" - "> +\t\t\t\tpca9635 at 68 {\n" + "> +\t\t\t\tpca9635@68 {\n" "> +\t\t\t\t\t#address-cells = <1>;\n" "> +\t\t\t\t\t#size-cells = <0>;\n" "> +\t\t\t\t\tcompatible = \"nxp,pca9635\";\n" @@ -388,11 +394,11 @@ "> +\t\t\t};\n" "> +\n" "> +\t\t\t/* J10: VCC, NC, RX, NC, TX, GND */\n" - "> +\t\t\tserial at 12000 {\n" + "> +\t\t\tserial@12000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" "> +\n" - "> +\t\t\tethernet at 70000 {\n" + "> +\t\t\tethernet@70000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t\tphy-mode = \"rgmii-id\";\n" "> +\t\t\t\tfixed-link {\n" @@ -401,7 +407,7 @@ "> +\t\t\t\t};\n" "> +\t\t\t};\n" "> +\n" - "> +\t\t\tethernet at 34000 {\n" + "> +\t\t\tethernet@34000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t\tphy-mode = \"sgmii\";\n" "> +\t\t\t\tfixed-link {\n" @@ -414,67 +420,67 @@ "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" "> +\n" - "> +\t\t\tsata at a8000 {\n" + "> +\t\t\tsata@a8000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" "> +\n" "> +\t\t\t/* USB part of the eSATA/USB 2.0 port */\n" - "> +\t\t\tusb at 50000 {\n" + "> +\t\t\tusb@50000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" "> +\n" - "> +\t\t\tusb3 at f8000 {\n" + "> +\t\t\tusb3@f8000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t\tusb-phy = <&usb3_phy>;\n" "> +\t\t\t};\n" "> +\n" - "> +\t\t\tflash at d0000 {\n" + "> +\t\t\tflash@d0000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t\tnum-cs = <1>;\n" "> +\t\t\t\tmarvell,nand-keep-config;\n" "> +\t\t\t\tmarvell,nand-enable-arbiter;\n" "> +\t\t\t\tnand-on-flash-bbt;\n" "> +\n" - "> +\t\t\t\tpartition at 0 {\n" + "> +\t\t\t\tpartition@0 {\n" "> +\t\t\t\t\tlabel = \"u-boot\";\n" "> +\t\t\t\t\treg = <0x0000000 0x200000>; /* 2MB */\n" "> +\t\t\t\t\tread-only;\n" "> +\t\t\t\t};\n" "> +\n" - "> +\t\t\t\tpartition at 100000 {\n" + "> +\t\t\t\tpartition@100000 {\n" "> +\t\t\t\t\tlabel = \"u_env\";\n" "> +\t\t\t\t\treg = <0x200000 0x40000>; /* 256KB */\n" "> +\t\t\t\t};\n" "> +\n" - "> +\t\t\t\tpartition at 140000 {\n" + "> +\t\t\t\tpartition@140000 {\n" "> +\t\t\t\t\tlabel = \"s_env\";\n" "> +\t\t\t\t\treg = <0x240000 0x40000>; /* 256KB */\n" "> +\t\t\t\t};\n" "> +\n" - "> +\t\t\t\tpartition at 900000 {\n" + "> +\t\t\t\tpartition@900000 {\n" "> +\t\t\t\t\tlabel = \"devinfo\";\n" "> +\t\t\t\t\treg = <0x900000 0x100000>; /* 1MB */\n" "> +\t\t\t\t\tread-only;\n" "> +\t\t\t\t};\n" "> +\n" "> +\t\t\t\t/* kernel1 overlaps with rootfs1 by design */\n" - "> +\t\t\t\tpartition at a00000 {\n" + "> +\t\t\t\tpartition@a00000 {\n" "> +\t\t\t\t\tlabel = \"kernel1\";\n" "> +\t\t\t\t\treg = <0xa00000 0x2800000>; /* 40MB */\n" "> +\t\t\t\t};\n" "> +\n" - "> +\t\t\t\tpartition at 1000000 {\n" + "> +\t\t\t\tpartition@1000000 {\n" "> +\t\t\t\t\tlabel = \"rootfs1\";\n" "> +\t\t\t\t\treg = <0x1000000 0x2200000>; /* 34MB */\n" "> +\t\t\t\t};\n" "> +\n" "> +\t\t\t\t/* kernel2 overlaps with rootfs2 by design */\n" - "> +\t\t\t\tpartition at 3200000 {\n" + "> +\t\t\t\tpartition@3200000 {\n" "> +\t\t\t\t\tlabel = \"kernel2\";\n" "> +\t\t\t\t\treg = <0x3200000 0x2800000>; /* 40MB */\n" "> +\t\t\t\t};\n" "> +\n" - "> +\t\t\t\tpartition at 3800000 {\n" + "> +\t\t\t\tpartition@3800000 {\n" "> +\t\t\t\t\tlabel = \"rootfs2\";\n" "> +\t\t\t\t\treg = <0x3800000 0x2200000>; /* 34MB */\n" "> +\t\t\t\t};\n" @@ -482,7 +488,7 @@ "> +\t\t\t\t/*\n" "> +\t\t\t\t * 38MB, last MB is for the BBT, not writable\n" "> +\t\t\t\t */\n" - "> +\t\t\t\tpartition at 5a00000 {\n" + "> +\t\t\t\tpartition@5a00000 {\n" "> +\t\t\t\t\tlabel = \"syscfg\";\n" "> +\t\t\t\t\treg = <0x5a00000 0x2600000>;\n" "> +\t\t\t\t};\n" @@ -493,7 +499,7 @@ "> +\t\t\t\t * partitions would break the bootloader\n" "> +\t\t\t\t * supplied bootargs\n" "> +\t\t\t\t */\n" - "> +\t\t\t\tpartition at 180000 {\n" + "> +\t\t\t\tpartition@180000 {\n" "> +\t\t\t\t\tlabel = \"unused_area\";\n" "> +\t\t\t\t\treg = <0x280000 0x680000>; /* 6.5MB */\n" "> +\t\t\t\t};\n" @@ -503,12 +509,12 @@ "> +\t\tpcie-controller {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\n" - "> +\t\t\tpcie at 1,0 {\n" + "> +\t\t\tpcie@1,0 {\n" "> +\t\t\t\t/* Marvell 88W8864, 5GHz-only */\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" "> +\n" - "> +\t\t\tpcie at 2,0 {\n" + "> +\t\t\tpcie@2,0 {\n" "> +\t\t\t\t/* Marvell 88W8864, 2GHz-only */\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" @@ -538,13 +544,13 @@ "> +\t\tpinctrl-0 = <&keys_pin>;\n" "> +\t\tpinctrl-names = \"default\";\n" "> +\n" - "> +\t\tbutton at 1 {\n" + "> +\t\tbutton@1 {\n" "> +\t\t\tlabel = \"WPS\";\n" "> +\t\t\tlinux,code = <KEY_WPS_BUTTON>;\n" "> +\t\t\tgpios = <&gpio0 24 GPIO_ACTIVE_LOW>;\n" "> +\t\t};\n" "> +\n" - "> +\t\tbutton at 2 {\n" + "> +\t\tbutton@2 {\n" "> +\t\t\tlabel = \"Factory Reset Button\";\n" "> +\t\t\tlinux,code = <KEY_RESTART>;\n" "> +\t\t\tgpios = <&gpio1 15 GPIO_ACTIVE_LOW>;\n" @@ -596,6 +602,10 @@ "Gregory Clement, Free Electrons\n" "Kernel, drivers, real-time and embedded Linux\n" "development, consulting, training and support.\n" - http://free-electrons.com + "http://free-electrons.com\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -6b19d20a839b5a929d4353f4c475cb20075c4976546014532c1fa07abfd94e1f +7ef35fb713642c6fe14bb9963395cd8bfee1adc183daf8bfb8c2b1aec4f2351f
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.