All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Sandeen <sandeen@redhat.com>
To: fstests@vger.kernel.org
Subject: [PATCH] xfs_repair: test for false positive reserved attr name use
Date: Wed, 13 May 2015 22:22:18 -0500	[thread overview]
Message-ID: <555414EA.80301@redhat.com> (raw)

xfs_repair compares attr names in the root namespace to
two special/reserved names, "SGI_ACL_FILE" and "SGI_ACL_DEFAULT"
and if the value in them aren't valid acls, flags this as
an inconsistency.

However, due to various bugs, xfs_repair may only compare
a smaller portion of the on-disk value; hence either
substrings or superstrings may match, and false-positive
corruption will be detected.  This test checks for those
false positives; i.e. the ACL names created in this test
may cause xfs_repair to "fix" them, but it should not.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
---

patch for xfs_repair will be sent shortly

diff --git a/tests/xfs/053 b/tests/xfs/053
new file mode 100755
index 0000000..284c014
--- /dev/null
+++ b/tests/xfs/053
@@ -0,0 +1,76 @@
+#! /bin/bash
+# FS QA Test 053
+#
+# Ensure that xfs_repair can properly spot SGI_ACL_FILE
+# and SGI_ACL_DEFAULT in the root attr namespace.
+#
+# Due to bugs here and there, we sometimes matched on partial
+# strings with those names, and threw off xfs_repair.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Red Hat, Inc.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+
+_supported_fs xfs
+_supported_os IRIX Linux
+_require_scratch
+
+rm -f $seqres.full
+
+_scratch_mount
+
+# Create root namespace attr names which are substrings or superstrings
+# of the reserved ACL names, and make sure xfs_repair copes.
+
+# Due to various bugs, either the compared length was shorter
+# than the reserved name (7 chars), so substrings matched, and/or only
+# the reserved name length was compared, so superstrings matched.
+
+rm -f $SCRATCH_MNT/$seq.*
+
+# actual reserved names:
+#           SGI_ACL_FILE	SGI_ACL_DEFAULT \
+for NAME in SGI_ACL \
+	    SGI_ACL_F		SGI_ACL_D \
+	    SGI_ACL_FILE_FOO	SGI_ACL_DEFAULT_FOO; do
+	touch $SCRATCH_MNT/${seq}.${NAME}
+	attr -R -s $NAME -V "Wow, such $NAME" $SCRATCH_MNT/${seq}.${NAME} \
+		| _filter_scratch
+done
+
+# Older repair failed because it sees the above names as matching
+# SGI_ACL_FILE / SGI_ACL_DEFAULT but w/o valid acls on them
+
+# The test harness will catch this (false positive) corruption
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/053.out b/tests/xfs/053.out
new file mode 100644
index 0000000..d876555
--- /dev/null
+++ b/tests/xfs/053.out
@@ -0,0 +1,11 @@
+QA output created by 053
+Attribute "SGI_ACL" set to a 17 byte value for SCRATCH_MNT/053.SGI_ACL:
+Wow, such SGI_ACL
+Attribute "SGI_ACL_F" set to a 19 byte value for SCRATCH_MNT/053.SGI_ACL_F:
+Wow, such SGI_ACL_F
+Attribute "SGI_ACL_D" set to a 19 byte value for SCRATCH_MNT/053.SGI_ACL_D:
+Wow, such SGI_ACL_D
+Attribute "SGI_ACL_FILE_FOO" set to a 26 byte value for SCRATCH_MNT/053.SGI_ACL_FILE_FOO:
+Wow, such SGI_ACL_FILE_FOO
+Attribute "SGI_ACL_DEFAULT_FOO" set to a 29 byte value for SCRATCH_MNT/053.SGI_ACL_DEFAULT_FOO:
+Wow, such SGI_ACL_DEFAULT_FOO
diff --git a/tests/xfs/group b/tests/xfs/group
index 58144d2..26dd881 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -50,6 +50,7 @@
 050 quota auto quick
 051 auto log metadata
 052 quota db auto quick
+053 acl auto
 054 quota auto quick
 055 dump ioctl remote tape
 056 dump ioctl auto quick


             reply	other threads:[~2015-05-14  3:22 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-14  3:22 Eric Sandeen [this message]
2015-05-14  4:55 ` [PATCH] xfs_repair: test for false positive reserved attr name use Eryu Guan
2015-05-14  5:23   ` Eric Sandeen
2015-05-14  5:44     ` Eryu Guan
2015-05-14 14:23       ` Eric Sandeen
2015-05-14 14:30 ` [PATCH V2] " Eric Sandeen
2015-05-15  6:29   ` Eryu Guan
2015-05-15 14:23   ` [PATCH V3] " Eric Sandeen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=555414EA.80301@redhat.com \
    --to=sandeen@redhat.com \
    --cc=fstests@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.