[U-Boot] [PATCH 00/19] imx: ventana: misc updates

[Stefano Babic <sbabic@denx.de>]

Hi Tim,

On 09/05/2015 03:28, Tim Harvey wrote:
> This collection of patches comprises a set of various updates I've been
> on for Ventana.
> 
> In summary:
>  - enable driver model
>  - enable gpio command
>  - enable dm-serial
>  - enable thermal support
>  - fixup for GW522x PCI enumeration
>  - split out common code shared between SPL an U-Boot
>  - pull down various init code to the SPL for use in Falcon mode
>  - enable Falcon mode (based on env var)
> 
> The enabling of Falcon mode is dependent on a patch I submitted earlier
> allowing nand env in spl [1].
> 
> Currently Falcon mode is configured for NAND boot. I plan on re-working
> a pending patchset I have that allows dynamic env support (use mmc or nand
> env depending on boot device) but I still need to re-work that using
> driver-model so it will come later.
> 
> I will send a followup patch with README updates explaining our use of Falcon
> mode if everything here looks good.
> 
> Tim
> 
> [1] https://patchwork.ozlabs.org/patch/470191/
> 
> Tim Harvey (19):
>   imx: ventana: set dtype env var to boot media
>   imx: ventana: display SPL boot device
>   imx: ventana: config: enable gpio command
>   imx: ventana: config: enable driver model
>   imx: ventana: register gpio's with gpio_request
>   imx: ventana: enable DM_SERIAL
>   imx: ventana: config: enable Thermal support
>   imx: ventana: config: use MMC SPL RAW support
>   imx: ventana: (cosmetic) clean up size defines for improved
>     readability
>   imx: ventana: fix pcie reset for GW522x
>   imx: ventana: default msata/pci mux to pci before PCI enumeration
>   imx: ventana: split out common functions between SPL and uboot
>   imx: ventana: move GSC boot watchdog disable function to gsc.c
>   imx: ventana: detect pmic using i2c probe instead of board model
>   imx: ventana: use common uart and i2c setup functions in SPL
>   imx: ventana: add gpio setup to SPL
>   imx: ventana: add pmic_setup to SPL
>   imx: ventana: add GSC boot watchdog disable to SPL
>   imx: ventana: config: enable Falcon mode
> 
>  board/gateworks/gw_ventana/Makefile         |   2 +-
>  board/gateworks/gw_ventana/common.c         | 827 +++++++++++++++++++++++++
>  board/gateworks/gw_ventana/common.h         |  98 +++
>  board/gateworks/gw_ventana/gsc.c            |  27 +
>  board/gateworks/gw_ventana/gsc.h            |   1 +
>  board/gateworks/gw_ventana/gw_ventana.c     | 911 ++--------------------------
>  board/gateworks/gw_ventana/gw_ventana_spl.c | 103 ++--
>  include/configs/gw_ventana.h                |  67 +-
>  8 files changed, 1102 insertions(+), 934 deletions(-)
>  create mode 100644 board/gateworks/gw_ventana/common.c
>  create mode 100644 board/gateworks/gw_ventana/common.h
> 

Patches 1-7, 10-16, 18 applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================