Altera Cyclone V DTB origin

[Steffen Schuetz <schuetz@cs.uni-kl.de>]

[-- Attachment #1.1: Type: text/plain, Size: 974 bytes --]

Hi,

I build a customized Linux image using Yocto Daisy - we need gcc >= 4.8
- following the instructions at
http://rocketboards.org/foswiki/Documentation/YoctoDoraBuildWithMetaAltera .
Besides the zImage and rootfs the build process outputs an .dtb file.
Now, in order to get the FPGA fabric involved, I'd have to come up with
a modified dts and build it.
That's where I'm a bit lost in the blur. I can not figure out where the
generated dtb is coming from? What's the mechanism behind? I cannot find
any .dts nor .dtb in the meta-altera layer.

Besides that I realized that if I use the dtb that shipped with the
board with the "daisy" kernel, the boot process gets stuck at "Waiting
for root device /dev/mmcblk0p3..." The "shipped" kernel is version 3.8.0
while the "daisy" one is 3.10.31-ltsi.
Was there a change in the device tree layout as the "old" one doesn't
work with the "daisy" kernel?


Thanks in advance!

Regards,
Steffen

-- 




[-- Attachment #1.2: schuetz.vcf --]
[-- Type: text/x-vcard, Size: 385 bytes --]

begin:vcard
fn:Dipl.-Ing. Steffen Schuetz
n:Schuetz;Steffen
org:TU Kaiserslautern;AG Robotersysteme, FB Informatik
adr:Gottlieb-Daimler-Str., Geb. 48;;Postfach 3049;Kaiserslautern;Rheinland-Pfalz;67663;Germany
email;internet:schuetz@cs.uni-kl.de
tel;work:+49 631 205 2579
tel;fax:+49 631 205 2640
x-mozilla-html:FALSE
url:http://agrosy.cs.uni-kl.de
version:2.1
end:vcard


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 484 bytes --]