Re: [Qemu-devel] [PATCHv2 1/3] Add specific config options for PCI-E bridges

[Shannon Zhao <zhaoshenglong@huawei.com>]

Hi,

I'm testing PCIe root port (ioh3420) on ARM64. Firstly I use following
simple command line to check whether it works.

qemu-system-aarch64 -M virt -device ioh3420

But it fails with below log:

qemu-system-aarch64: -device ioh3420: Device initialization failed
qemu-system-aarch64: -device ioh3420: Device 'ioh3420' could not be
initialized

Is there something wrong with my command line? or ioh3420 can't be used
on ARM64? But from this patch and the discussions on it, it seems
ioh3420 should work on ARM64.

Thanks,
Shannon

On 2015/2/27 14:04, David Gibson wrote:
> The i82801b11, ioh3420 and xio3130 PCI Express devices are currently
> included in the build unconditionally.
> 
> While they could theoretically appear on any target platform with PCI-E,
> they're pretty unlikely to appear on platforms that aren't Intel derived.
> 
> Therefore, to avoid presenting unlikely-to-be-relevant devices to the user,
> add config options to enable these components, and enable them by default
> only on x86 and arm platforms.
> 
> (Note that this patch does include these for aarch64, via its inclusion of
> arm-softmmu.mak).
> 
> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> ---
>  default-configs/arm-softmmu.mak    | 4 ++++
>  default-configs/i386-softmmu.mak   | 3 +++
>  default-configs/x86_64-softmmu.mak | 3 +++
>  hw/pci-bridge/Makefile.objs        | 5 +++--
>  4 files changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index b00c2e1..6ee9b43 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -91,3 +91,7 @@ CONFIG_INTEGRATOR_DEBUG=y
>  CONFIG_ALLWINNER_A10_PIT=y
>  CONFIG_ALLWINNER_A10_PIC=y
>  CONFIG_ALLWINNER_A10=y
> +
> +CONFIG_XIO3130=y
> +CONFIG_IOH3420=y
> +CONFIG_I82801B11=y
> diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
> index bd99af9..0b8ce4b 100644
> --- a/default-configs/i386-softmmu.mak
> +++ b/default-configs/i386-softmmu.mak
> @@ -43,3 +43,6 @@ CONFIG_IOAPIC=y
>  CONFIG_ICC_BUS=y
>  CONFIG_PVPANIC=y
>  CONFIG_MEM_HOTPLUG=y
> +CONFIG_XIO3130=y
> +CONFIG_IOH3420=y
> +CONFIG_I82801B11=y
> diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
> index e7c2734..6add04a 100644
> --- a/default-configs/x86_64-softmmu.mak
> +++ b/default-configs/x86_64-softmmu.mak
> @@ -43,3 +43,6 @@ CONFIG_IOAPIC=y
>  CONFIG_ICC_BUS=y
>  CONFIG_PVPANIC=y
>  CONFIG_MEM_HOTPLUG=y
> +CONFIG_XIO3130=y
> +CONFIG_IOH3420=y
> +CONFIG_I82801B11=y
> diff --git a/hw/pci-bridge/Makefile.objs b/hw/pci-bridge/Makefile.objs
> index 968b369..96c596e 100644
> --- a/hw/pci-bridge/Makefile.objs
> +++ b/hw/pci-bridge/Makefile.objs
> @@ -1,5 +1,6 @@
>  common-obj-y += pci_bridge_dev.o
> -common-obj-y += ioh3420.o xio3130_upstream.o xio3130_downstream.o
> -common-obj-y += i82801b11.o
> +common-obj-$(CONFIG_XIO3130) += xio3130_upstream.o xio3130_downstream.o
> +common-obj-$(CONFIG_IOH3420) += ioh3420.o
> +common-obj-$(CONFIG_I82801B11) += i82801b11.o
>  # NewWorld PowerMac
>  common-obj-$(CONFIG_DEC_PCI) += dec.o
>