[U-Boot] [Patch v3 0/4] imx: mx6: use OTP for teperature grade info

[Markus Niebel <list-09_u-boot@tqsc.de>]

Am 18.05.2015 um 15:56 schrieb Tim Harvey:
> Use Temperature grade info in OTP/eFUSE for thermal management and display of
> thermal data.
> 
> Cc: Stefan Roese <sr@denx.de>
> Cc: Eric Nelson <eric.nelson@boundarydevices.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Nikita Kiryanov <nikita@compulab.co.il>
> Cc: Jon Nettleton <jon.nettleton@gmail.com>
> Cc: Jason Liu <r64343@freescale.com>
> Cc: Ye Li <b37916@freescale.com>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
> Cc: Markus Niebel <Markus.Niebel@tq-group.com>
> Cc: Peng Fan <b51431@freescale.com>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
> v3:
>  - include display of temperature grade for IMX6SX
> v2:
>  - split into two series: 1 for CPU frequency, other for Temperature grade
> 
> Tim Harvey (4):
>   mx6: add OTP bank1 registers
>   imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from
>     OTP
>   imx: mx6: add display of CPU temperature grade in print_cpuinfo()
>   thermal: imx_thermal: use CPU temperature grade for trip points
> 
>  arch/arm/cpu/armv7/mx6/soc.c              | 38 +++++++++++++++++++++++++++++++
>  arch/arm/imx-common/cpu.c                 | 25 ++++++++++++++++----
>  arch/arm/include/asm/arch-mx6/imx-regs.h  | 19 ++++++++++++++++
>  arch/arm/include/asm/arch-mx6/sys_proto.h |  1 +
>  drivers/thermal/imx_thermal.c             | 29 +++++++++++++++--------
>  include/imx_thermal.h                     |  6 +++++
>  6 files changed, 104 insertions(+), 14 deletions(-)
> 

Tested on TQMa6Q and TQMa6D

following patches were also applied:
https://patchwork.ozlabs.org/patch/473405/
https://patchwork.ozlabs.org/patch/473406/

Tested-by: Markus Niebel <Markus.Niebel@tq-group.com>