From: Jacob Stiffler <j-stiffler@ti.com>
To: <meta-ti@yoctoproject.org>
Subject: Re: [PATCH 2/2] ti-llvm3.3: Add LLVM 3.3 with c6x intrinsic support.
Date: Wed, 20 May 2015 12:09:32 -0400 [thread overview]
Message-ID: <555CB1BC.7020504@ti.com> (raw)
In-Reply-To: <1430245299-14096-2-git-send-email-j-stiffler@ti.com>
Ping.
On 4/28/2015 2:21 PM, Jacob Stiffler wrote:
> * Supports target, native, and nativesdk classes.
>
> Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
> ---
> ...e-Do-not-check-build-executable-extension.patch | 60 ++++++++++++
> recipes-core/llvm/ti-llvm3.3_3.3.bb | 103 ++++++++++++++++++++
> 2 files changed, 163 insertions(+)
> create mode 100644 recipes-core/llvm/ti-llvm3.3/0001-configure-Do-not-check-build-executable-extension.patch
> create mode 100644 recipes-core/llvm/ti-llvm3.3_3.3.bb
>
> diff --git a/recipes-core/llvm/ti-llvm3.3/0001-configure-Do-not-check-build-executable-extension.patch b/recipes-core/llvm/ti-llvm3.3/0001-configure-Do-not-check-build-executable-extension.patch
> new file mode 100644
> index 0000000..b6e5331
> --- /dev/null
> +++ b/recipes-core/llvm/ti-llvm3.3/0001-configure-Do-not-check-build-executable-extension.patch
> @@ -0,0 +1,60 @@
> +From 60da8adc29a84796c9768a1a962eda1915c87332 Mon Sep 17 00:00:00 2001
> +From: Jake Stiffler <j-stiffler@ti.com>
> +Date: Fri, 20 Feb 2015 10:55:11 -0500
> +Subject: [PATCH] configure: Do not check build executable extension.
> +
> + * This seems to cause issues nativesdk and build sdk
> + architectures are the same.
> +
> +Signed-off-by: Jake Stiffler <j-stiffler@ti.com>
> +---
> + configure | 3 +++
> + projects/sample/configure | 4 ++++
> + 2 files changed, 7 insertions(+)
> +
> +diff --git a/configure b/configure
> +index decbc40..387c4fd 100755
> +--- a/configure
> ++++ b/configure
> +@@ -4951,6 +4951,8 @@ echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
> + rm -f conftest*
> + echo 'int main () { return 0; }' > conftest.$ac_ext
> + ac_cv_build_exeext=
> ++
> ++if false; then
> + if { (eval echo "$as_me:$LINENO: \"$ac_build_link\"") >&5
> + (eval $ac_build_link) 2>&5
> + ac_status=$?
> +@@ -4967,6 +4969,7 @@ echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
> + echo "$as_me: error: installation or configuration problem: compiler cannot create executables." >&2;}
> + { (exit 1); exit 1; }; }
> + fi
> ++fi
> + rm -f conftest*
> + test x"${ac_cv_build_exeext}" = x && ac_cv_build_exeext=blank
> + fi
> +diff --git a/projects/sample/configure b/projects/sample/configure
> +index a2c70c6..b57f21c 100755
> +--- a/projects/sample/configure
> ++++ b/projects/sample/configure
> +@@ -4753,6 +4753,8 @@ echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
> + rm -f conftest*
> + echo 'int main () { return 0; }' > conftest.$ac_ext
> + ac_cv_build_exeext=
> ++
> ++if false; then
> + if { (eval echo "$as_me:$LINENO: \"$ac_build_link\"") >&5
> + (eval $ac_build_link) 2>&5
> + ac_status=$?
> +@@ -4769,6 +4771,8 @@ echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
> + echo "$as_me: error: installation or configuration problem: compiler cannot create executables." >&2;}
> + { (exit 1); exit 1; }; }
> + fi
> ++fi
> ++
> + rm -f conftest*
> + test x"${ac_cv_build_exeext}" = x && ac_cv_build_exeext=blank
> + fi
> +--
> +1.7.9.5
> +
> diff --git a/recipes-core/llvm/ti-llvm3.3_3.3.bb b/recipes-core/llvm/ti-llvm3.3_3.3.bb
> new file mode 100644
> index 0000000..9ae8866
> --- /dev/null
> +++ b/recipes-core/llvm/ti-llvm3.3_3.3.bb
> @@ -0,0 +1,103 @@
> +DESCRIPTION = "LLVM 3.3 with support for TI C66x intrinsics"
> +HOMEPAGE = "https://gitorious.design.ti.com/ocl/llvm33-src"
> +
> +do_configure_prepend_class-native() {
> + # Fix paths in llvm-config
> + sed -i "s|sys::path::parent_path(sys::path::parent_path(CurrentPath))).str()|sys::path::parent_path(CurrentPath))\.str()|g" ${S}/tools/llvm-config/llvm-config.cpp
> +}
> +
> +require recipes-core/llvm/llvm.inc
> +require recipes-core/llvm/llvm3.inc
> +
> +DEPENDS_append_class-native = " llvm-common-native"
> +
> +LLVM_DIR = "ti-llvm${PV}"
> +
> +BRANCH = "master"
> +
> +SRC_URI = " \
> + git://git.ti.com/opencl/ti-llvm-clang-3_3.git;protocol=git;branch=${BRANCH} \
> + file://0001-configure-Do-not-check-build-executable-extension.patch \
> +"
> +
> +
> +SRCREV = "29629a3e70d445cfbfbb4046a56d3648ebae9544"
> +
> +S = "${WORKDIR}/git"
> +
> +do_compile_class-native() {
> + cd ${LLVM_BUILD_DIR}
> + oe_runmake
> +}
> +
> +do_compile_class-nativesdk() {
> + cd ${LLVM_BUILD_DIR}
> + oe_runmake \
> + AR="${BUILD_AR}" \
> + CC="${BUILD_CC}" \
> + CFLAGS="${BUILD_CFLAGS}" \
> + CXX="${BUILD_CXX}" \
> + CXXFLAGS="${BUILD_CXXFLAGS}" \
> + CPP="${BUILD_CPP}" \
> + CPPFLAGS="${BUILD_CPPFLAGS}" \
> + LD="${BUILD_LD}" \
> + LDFLAGS="${BUILD_LDFLAGS}" \
> + NM="${BUILD_NM}" \
> + RANLIB="${BUILD_RANLIB}" \
> + PATH="${STAGING_BINDIR_NATIVE}:$PATH" \
> + cross-compile-build-tools
> + oe_runmake
> +}
> +
> +do_install_append_class-target() {
> + for b in ${D}${bindir}/${LLVM_DIR}/${HOST_SYS}-clang*; do
> + if [ ! -L ${b} ]; then
> + mv ${b} ${D}${bindir}/`echo "${b}" | sed -e 's|${D}${bindir}/${LLVM_DIR}/${HOST_SYS}-||g'`
> + fi
> + done
> +}
> +
> +do_install_class-native() {
> + cd ${LLVM_BUILD_DIR}
> + oe_runmake DESTDIR=${LLVM_INSTALL_DIR} install
> +
> + mv ${LLVM_INSTALL_DIR}${bindir}/${HOST_SYS}-llvm-config ${LLVM_INSTALL_DIR}/llvm-config${PV}-ti
> +
> + install -d ${D}${bindir}
> + for b in ${LLVM_INSTALL_DIR}${bindir}/${HOST_SYS}-clang*; do
> + if [ ! -L ${b} ]; then
> + mv ${b} ${D}${bindir}/`echo "${b}" | sed -e 's|${LLVM_INSTALL_DIR}${bindir}/${HOST_SYS}-||g'`
> + fi
> + done
> +
> + install -d ${D}${bindir}/${LLVM_DIR}
> + mv ${LLVM_INSTALL_DIR}${bindir}/* ${D}${bindir}/${LLVM_DIR}/
> +
> + install -d ${D}${includedir}/${LLVM_DIR}
> + mv ${LLVM_INSTALL_DIR}${includedir}/* ${D}${includedir}/${LLVM_DIR}/
> +
> + install -d ${D}${libdir}/${LLVM_DIR}
> + mv ${LLVM_INSTALL_DIR}${libdir}/* ${D}${libdir}/${LLVM_DIR}/
> + ln -s ${LLVM_DIR}/libLLVM-${PV}.so ${D}${libdir}/libLLVM-${PV}.so
> +
> + install -d ${D}${docdir}/${LLVM_DIR}
> + mv ${LLVM_INSTALL_DIR}${prefix}/docs/llvm/* ${D}${docdir}/${LLVM_DIR}
> +
> + install -d ${D}${bindir}
> + install -m 0755 ${LLVM_INSTALL_DIR}/llvm-config${PV}-ti ${D}${bindir}
> +}
> +
> +SYSROOT_PREPROCESS_FUNCS_class-target += "llvm_sysroot_preprocess_target"
> +SYSROOT_PREPROCESS_FUNCS_class-nativesdk += "llvm_sysroot_preprocess_target"
> +
> +llvm_sysroot_preprocess() {
> + :
> +}
> +
> +llvm_sysroot_preprocess_target() {
> + install -d ${SYSROOT_DESTDIR}${bindir_crossscripts}
> + mv ${LLVM_INSTALL_DIR}/llvm-config-host ${SYSROOT_DESTDIR}${bindir_crossscripts}/llvm-config${PV}-ti
> +}
> +
> +BBCLASSEXTEND = "native nativesdk"
> +
next prev parent reply other threads:[~2015-05-20 16:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-28 18:21 [PATCH 1/2] llvm-common: Extend to nativesdk class Jacob Stiffler
2015-04-28 18:21 ` [PATCH 2/2] ti-llvm3.3: Add LLVM 3.3 with c6x intrinsic support Jacob Stiffler
2015-05-20 16:09 ` Jacob Stiffler [this message]
2015-05-21 2:01 ` Denys Dmytriyenko
2015-05-20 16:09 ` [PATCH 1/2] llvm-common: Extend to nativesdk class Jacob Stiffler
2015-05-21 2:00 ` Denys Dmytriyenko
2015-05-22 18:22 ` Denys Dmytriyenko
-- strict thread matches above, loose matches on Subject: below --
2015-06-05 12:01 Jacob Stiffler
2015-06-05 12:01 ` [PATCH 2/2] ti-llvm3.3: Add LLVM 3.3 with c6x intrinsic support Jacob Stiffler
2015-08-10 11:56 ` Jacob Stiffler
2015-02-25 19:28 [PATCH 1/2] llvm-common: Extend to nativesdk class Jacob Stiffler
2015-02-25 19:28 ` [PATCH 2/2] ti-llvm3.3: Add LLVM 3.3 with c6x intrinsic support Jacob Stiffler
2015-02-25 20:04 ` Denys Dmytriyenko
2015-02-25 20:53 ` Stiffler, Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=555CB1BC.7020504@ti.com \
--to=j-stiffler@ti.com \
--cc=meta-ti@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.