From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from lists.s-osg.org ([54.187.51.154]:48565 "EHLO lists.s-osg.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754716AbbEUOkS (ORCPT ); Thu, 21 May 2015 10:40:18 -0400 Message-ID: <555DEE4E.4020307@osg.samsung.com> Date: Thu, 21 May 2015 16:40:14 +0200 From: Stefan Schmidt MIME-Version: 1.0 Subject: Re: [PATCH atubs-fw 0/4] ATUSB firmware changes towards a 0.2 release References: <1432127894-4760-1-git-send-email-stefan@datenfreihafen.org> <555C8A77.3070203@datenfreihafen.org> In-Reply-To: <555C8A77.3070203@datenfreihafen.org> Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-wpan-owner@vger.kernel.org List-ID: To: Stefan Schmidt , linux-wpan@vger.kernel.org Cc: alex.aring@gmail.com, werner@almesberger.net Hello. On 20/05/15 15:21, Stefan Schmidt wrote: > Hello. > > On 20/05/15 15:18, Stefan Schmidt wrote: >> Hello. >> >> Nothing to be appliad to the kernel but rather the atusb firmware repo. Just >> sending it here as it is releated to the mainline driver and the device users >> are reading here. >> >> These are the four patches I consider we need to have a working 0.2 release. >> The revert might be only needed for my qemu setup with USB passthrough, but >> without it I'm not able to get the device to show up in qemu. Thoughts >> appreciated. >> >> Using RX_AACK_ON sounds like a good idea as we loose nothing but work also work >> well with nodes using ARET. >> >> Bumping to version 0.2 and adding the need magic to add a valid DFU suffix to >> the firmware file. I will followup with a mail attaching the binary I'm using >> right now and I consider the final 0.2 if everyone agrees with these patches. >> > Binary firmware image attached. Alexander, if you could give that a test > it would be appreciated. > > Everyone else with a atusb please test as well if you have the time. The pending patches have been pushed and I tagged the atusb firmware 0.2 release in git: http://projects.qi-hardware.com/index.php/p/ben-wpan/source/changes/v0.2-atusb-fw/ The firmware binary should be available from the website soon. If you are eager you can get it here: http://projects.qi-hardware.com/index.php/p/ben-wpan/source/tree/master/web/releases/atusb-0.2.dfu If anyone has patches for the firmware pending or upcoming please CC me. I should be able help reviewing, testing and pushing them. regards Stefan Schmidt