All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Subject: [PATCH v3.6 20/22] drm/i915: Calculate haswell plane workaround, v4.
Date: Tue, 26 May 2015 10:36:14 +0200	[thread overview]
Message-ID: <5564307E.60205@linux.intel.com> (raw)
In-Reply-To: <1432137874-20543-11-git-send-email-maarten.lankhorst@linux.intel.com>

This needs to be a global check because at the time of crtc checking
not all modesets have to be calculated yet. Use intel_crtc->atomic
because there's no reason to keep it in state.

Changes since v1:
 - Use intel_crtc->atomic as a place to put hsw_workaround_pipe.
 - Make sure quirk only applies to haswell.
 - Use first loop to iterate over newly enabled crtc's only.
   This increases readability.
Changes since v2:
 - Move hsw_workaround_pipe back to crtc_state.
Changes since v3:
 - Return errors from haswell_mode_set_planes_workaround.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 109 +++++++++++++++++++++++++----------
 drivers/gpu/drm/i915/intel_drv.h     |   3 +
 2 files changed, 80 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index de13c1c14c93..f6733a777590 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4867,42 +4867,15 @@ static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
 	return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
 }
 
-/*
- * This implements the workaround described in the "notes" section of the mode
- * set sequence documentation. When going from no pipes or single pipe to
- * multiple pipes, and planes are enabled after the pipe, we need to wait at
- * least 2 vblanks on the first pipe before enabling planes on the second pipe.
- */
-static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
-{
-	struct drm_device *dev = crtc->base.dev;
-	struct intel_crtc *crtc_it, *other_active_crtc = NULL;
-
-	/* We want to get the other_active_crtc only if there's only 1 other
-	 * active crtc. */
-	for_each_intel_crtc(dev, crtc_it) {
-		if (!crtc_it->active || crtc_it == crtc)
-			continue;
-
-		if (other_active_crtc)
-			return;
-
-		other_active_crtc = crtc_it;
-	}
-	if (!other_active_crtc)
-		return;
-
-	intel_wait_for_vblank(dev, other_active_crtc->pipe);
-	intel_wait_for_vblank(dev, other_active_crtc->pipe);
-}
-
 static void haswell_crtc_enable(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_encoder *encoder;
-	int pipe = intel_crtc->pipe;
+	int pipe = intel_crtc->pipe, hsw_workaround_pipe;
+	struct intel_crtc_state *pipe_config =
+		to_intel_crtc_state(crtc->state);
 
 	if (WARN_ON(intel_crtc->active))
 		return;
@@ -4979,7 +4952,11 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 
 	/* If we change the relative order between pipe/planes enabling, we need
 	 * to change the workaround. */
-	haswell_mode_set_planes_workaround(intel_crtc);
+	hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
+	if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
+		intel_wait_for_vblank(dev, hsw_workaround_pipe);
+		intel_wait_for_vblank(dev, hsw_workaround_pipe);
+	}
 }
 
 static void ironlake_pfit_disable(struct intel_crtc *crtc)
@@ -12169,6 +12146,71 @@ static int __intel_set_mode_setup_plls(struct drm_atomic_state *state)
 	return ret;
 }
 
+/*
+ * This implements the workaround described in the "notes" section of the mode
+ * set sequence documentation. When going from no pipes or single pipe to
+ * multiple pipes, and planes are enabled after the pipe, we need to wait at
+ * least 2 vblanks on the first pipe before enabling planes on the second pipe.
+ */
+static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *crtc_state;
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *crtc;
+	struct intel_crtc_state *first_crtc_state = NULL;
+	struct intel_crtc_state *other_crtc_state = NULL;
+	enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
+	int i;
+
+	/* look at all crtc's that are going to be enabled in during modeset */
+	for_each_crtc_in_state(state, crtc, crtc_state, i) {
+		intel_crtc = to_intel_crtc(crtc);
+
+		if (!crtc_state->active || !needs_modeset(crtc_state))
+			continue;
+
+		if (first_crtc_state) {
+			other_crtc_state = to_intel_crtc_state(crtc_state);
+			break;
+		} else {
+			first_crtc_state = to_intel_crtc_state(crtc_state);
+			first_pipe = intel_crtc->pipe;
+		}
+	}
+
+	/* No workaround needed? */
+	if (!first_crtc_state)
+		return 0;
+
+	/* w/a possibly needed, check how many crtc's are already enabled. */
+	for_each_intel_crtc(state->dev, intel_crtc) {
+		struct intel_crtc_state *pipe_config;
+
+		pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+		if (IS_ERR(pipe_config))
+			return PTR_ERR(pipe_config);
+
+		pipe_config->hsw_workaround_pipe = INVALID_PIPE;
+
+		if (!pipe_config->base.active ||
+		    needs_modeset(&pipe_config->base))
+			continue;
+
+		/* 2 or more enabled crtcs means no need for w/a */
+		if (enabled_pipe != INVALID_PIPE)
+			return 0;
+
+		enabled_pipe = intel_crtc->pipe;
+	}
+
+	if (enabled_pipe != INVALID_PIPE)
+		first_crtc_state->hsw_workaround_pipe = enabled_pipe;
+	else if (other_crtc_state)
+		other_crtc_state->hsw_workaround_pipe = first_pipe;
+
+	return 0;
+}
+
 /* Code that should eventually be part of atomic_check() */
 static int __intel_set_mode_checks(struct drm_atomic_state *state)
 {
@@ -12192,7 +12234,10 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 	if (ret)
 		return ret;
 
-	return 0;
+	if (IS_HASWELL(dev))
+		ret = haswell_mode_set_planes_workaround(state);
+
+	return ret;
 }
 
 static int
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 665e249ae8bf..d5f38e3d732b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -443,6 +443,9 @@ struct intel_crtc_state {
 	int pbn;
 
 	struct intel_crtc_scaler_state scaler_state;
+
+	/* w/a for waiting 2 vblanks during crtc enable */
+	enum pipe hsw_workaround_pipe;
 };
 
 struct intel_pipe_wm {
-- 
2.1.0


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-05-26  8:36 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-20 13:38 [PATCH v3 00/22] drm/i915: Convert to atomic, part 2 Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 01/22] drm/i915: get rid of put_shared_dpll Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 02/22] drm/i915: get rid of intel_crtc_disable and related code, v2 Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 03/22] drm/i915: use intel_crtc_control everywhere, v2 Maarten Lankhorst
2015-05-21 12:33   ` [PATCH v3.5 02.5/22] drm/i915: add intel_display_suspend Maarten Lankhorst
2015-05-22 23:03     ` Matt Roper
2015-05-25  6:47       ` Maarten Lankhorst
2015-05-26  8:31       ` [PATCH v3.6 02.5/22] drm/i915: add intel_display_suspend, v2 Maarten Lankhorst
2015-05-21 12:34   ` [PATCH v3.5 03/22] drm/i915: use intel_crtc_control everywhere, v3 Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 04/22] drm/i915: Use drm_atomic_helper_update_legacy_modeset_state, v2 Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 05/22] drm/i915: Make __intel_set_mode() take only atomic state as argument Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 06/22] drm/i915: Set mode_changed for audio in intel_modeset_pipe_config() Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 07/22] drm/i915: Use crtc_state->active instead of crtc_state->enable Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 08/22] drm/i915: Zap call to drm_plane_helper_disable Maarten Lankhorst
2015-05-28  1:37   ` Matt Roper
2015-05-28  7:22     ` Maarten Lankhorst
2015-05-20 13:38 ` [PATCH v3 09/22] drm/i915: calculate primary visibility changes instead of calling from set_config Maarten Lankhorst
2015-05-20 16:04 ` [PATCH v3 10/22] drm/i915: Support modeset across multiple pipes maarten.lankhorst
2015-05-20 16:04   ` [PATCH v3 11/22] drm/i915: Use global atomic state for staged pll config, v2 maarten.lankhorst
2015-05-20 16:04   ` [PATCH v3 12/22] drm/i915: Use drm_atomic_helper_swap_state in intel_atomic_commit maarten.lankhorst
2015-05-20 16:04   ` [PATCH v3 13/22] drm/i915: Swap planes on each crtc separately maarten.lankhorst
2015-05-29  0:56     ` Matt Roper
2015-05-20 16:04   ` [PATCH v3 14/22] drm/i915: Move cdclk and pll setup to intel_modeset_compute_config() maarten.lankhorst
2015-05-29  0:55     ` Matt Roper
2015-06-01  6:31       ` Maarten Lankhorst
2015-05-20 16:04   ` [PATCH v3 15/22] drm/i915: Read hw state into an atomic state struct maarten.lankhorst
2015-05-27  5:30     ` Maarten Lankhorst
2015-05-27 11:26       ` Daniel Vetter
2015-05-29  0:55     ` Matt Roper
2015-06-01  6:35       ` Maarten Lankhorst
2015-05-20 16:04   ` [PATCH v3 16/22] drm/i915: Implement intel_crtc_control using atomic state, v3 maarten.lankhorst
2015-05-21 12:40     ` [PATCH v3.5 16.5/22] drm/i915: Make intel_display_suspend atomic Maarten Lankhorst
2015-05-26  8:33       ` [PATCH v3.6 16.5/22] drm/i915: Make intel_display_suspend atomic, v2 Maarten Lankhorst
2015-05-26  8:35     ` [PATCH v3.6 16/22] drm/i915: Implement intel_crtc_control using atomic state, v4 Maarten Lankhorst
2015-05-29  0:57       ` Matt Roper
2015-06-01  6:39         ` Maarten Lankhorst
2015-05-20 16:04   ` [PATCH v3 17/22] drm/i915: move swap state to the right place maarten.lankhorst
2015-05-20 16:04   ` [PATCH v3 18/22] drm/i915: Use crtc->hwmode for vblanks, v2 maarten.lankhorst
2015-05-20 16:04   ` [PATCH v3 19/22] drm/i915: Remove use of crtc->config from i915_debugfs.c maarten.lankhorst
2015-05-20 16:04   ` [PATCH v3 20/22] drm/i915: Calculate haswell plane workaround, v3 maarten.lankhorst
2015-05-26  8:36     ` Maarten Lankhorst [this message]
2015-05-29  0:58       ` [PATCH v3.6 20/22] drm/i915: Calculate haswell plane workaround, v4 Matt Roper
2015-05-20 16:04   ` [PATCH v3 21/22] drm/i915: Use atomic state for calculating DVO_2X_MODE on i830 maarten.lankhorst
2015-05-20 16:04   ` [PATCH v3 22/22] drm/i915: use calculated state for vblank evasion maarten.lankhorst
2015-05-29  1:23 ` [PATCH v3 00/22] drm/i915: Convert to atomic, part 2 Matt Roper
2015-06-01  8:11 ` Ander Conselvan De Oliveira

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5564307E.60205@linux.intel.com \
    --to=maarten.lankhorst@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.