From: Gerhard Wiesinger <lists-tcxHB8FAk+J54TAoqtyWWQ@public.gmane.org>
To: Harald Hoyer <harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
initramfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: Update FC22 - doesn't find root fs and doesn't boot
Date: Wed, 27 May 2015 14:09:10 +0200 [thread overview]
Message-ID: <5565B3E6.4010806@wiesinger.com> (raw)
In-Reply-To: <5565B0E6.3050204-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
On 27.05.2015 13:56, Harald Hoyer wrote:
> Am 27.05.2015 um 13:28 schrieb Gerhard Wiesinger:
>> Hello,
>>
>> After upgrading one machine it does't boot anymore. Booting the old kernel
>> works well.
>>
>> It is a RAID, LUKS, LVM setup. Find relevant details below.
>>
>> So it looks RAID assembling doesn't work any more.
>>
>> Any ideas?
>>
>> Thank you.
>>
>> Ciao,
>> Gerhard
>>
>> blkid
>> /dev/sda1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37" TYPE="linux_raid_member"
>> PARTUUID="5ec6792c-01"
>> /dev/sdb1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37" TYPE="linux_raid_member"
>> PARTUUID="1c7cffaf-01"
>> /dev/sdc1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37" TYPE="linux_raid_member"
>> PARTUUID="0079dfc3-01"
>> /dev/sdd1: UUID="eb295015-e20b-e133-15db-5c9130487300" TYPE="linux_raid_member"
>> PARTUUID="fadeaffe-01"
>> /dev/sde1: UUID="eb295015-e20b-e133-15db-5c9130487300" TYPE="linux_raid_member"
>> PARTUUID="539b5814-01"
>> /dev/sdf1: UUID="eb295015-e20b-e133-15db-5c9130487300" TYPE="linux_raid_member"
>> PARTUUID="badeaffe-01"
>> /dev/sdh1: UUID="51e8e983-8786-b868-dbc3-87357e1a9534" TYPE="linux_raid_member"
>> PARTUUID="15631562-01"
>> /dev/sdg1: UUID="51e8e983-8786-b868-dbc3-87357e1a9534" TYPE="linux_raid_member"
>> PARTUUID="162f0d0b-01"
>>
>>
>> blkid -o udev
>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>> ID_FS_TYPE=linux_raid_member
>> ID_FS_PARTUUID=5ec6792c-01
>>
>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>> ID_FS_TYPE=linux_raid_member
>> ID_FS_PARTUUID=1c7cffaf-01
>>
>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37
>> ID_FS_TYPE=linux_raid_member
>> ID_FS_PARTUUID=0079dfc3-01
>>
>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300
>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300
>> ID_FS_TYPE=linux_raid_member
>> ID_FS_PARTUUID=fadeaffe-01
>>
>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300
>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300
>> ID_FS_TYPE=linux_raid_member
>> ID_FS_PARTUUID=539b5814-01
>>
>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300
>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300
>> ID_FS_TYPE=linux_raid_member
>> ID_FS_PARTUUID=badeaffe-01
>>
>> ID_FS_UUID=51e8e983-8786-b868-dbc3-87357e1a9534
>> ID_FS_UUID_ENC=51e8e983-8786-b868-dbc3-87357e1a9534
>> ID_FS_TYPE=linux_raid_member
>> ID_FS_PARTUUID=15631562-01
>>
>> ID_FS_UUID=51e8e983-8786-b868-dbc3-87357e1a9534
>> ID_FS_UUID_ENC=51e8e983-8786-b868-dbc3-87357e1a9534
>> ID_FS_TYPE=linux_raid_member
>> ID_FS_PARTUUID=162f0d0b-01
>>
>> [ 2.479836] myhost systemd[1]: Device
>> dev-disk-by\x2did-usb\x2dUSBDisk_RunDisk_ABCDEFGH\x2d0:0.device appeared twice
>> with different sysfs paths /sys
>> /devices/pci0000:00/0000:00:04.1/usb2/2-5/2-5:1.0/host9/target9:0:0/9:0:0:0/block/sdh
>> and /sys/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0/host8/target
>> 8:0:0/8:0:0:0/block/sdg
>> [ 2.500826] myhost systemd[1]: Device
>> dev-disk-by\x2did-usb\x2dUSBDisk_RunDisk_ABCDEFGH\x2d0:0\x2dpart1.device
>> appeared twice with different sysfs p
>> aths
>> /sys/devices/pci0000:00/0000:00:04.1/usb2/2-5/2-5:1.0/host9/target9:0:0/9:0:0:0/block/sdh/sdh1
>> and /sys/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.
>> 0/host8/target8:0:0/8:0:0:0/block/sdg/sdg1
>> [ 2.632754] myhost kernel: Switched to clocksource tsc
>> [ 91.162986] myhost systemd[1]: Job dev-md0.device/start timed out.
>> [ 91.163138] myhost systemd[1]: Timed out waiting for device dev-md0.device.
>> [ 91.163251] myhost systemd[1]: Dependency failed for Cryptography Setup for
>> luks-md0.
>> [ 91.163360] myhost systemd[1]: Dependency failed for
>> dev-mapper-luks\x2dmd0.device.
>> [ 91.163474] myhost systemd[1]: Job dev-mapper-luks\x2dmd0.device/start
>> failed with result 'dependency'.
>> [ 91.163586] myhost systemd[1]: Dependency failed for Encrypted Volumes.
>> [ 91.163694] myhost systemd[1]: Job cryptsetup.target/start failed with
>> result 'dependency'.
>> [ 91.163801] myhost systemd[1]: Job
>> systemd-cryptsetup@luks\x2dmd0.service/start failed with result 'dependency'.
>> [ 91.163910] myhost systemd[1]: Job dev-md0.device/start failed with result
>> 'timeout'.
>> [ 91.164021] myhost systemd[1]: Reached target System Initialization.
>> [ 91.164129] myhost systemd[1]: Starting System Initialization.
>> [ 91.164236] myhost systemd[1]: Reached target Basic System.
>> [ 91.164346] myhost systemd[1]: Starting Basic System.
>> [ 185.740238] myhost dracut-initqueue[340]: Warning: Could not boot.
>> [ 185.741266] myhost systemd[1]: Received SIGRTMIN+20 from PID 341 (plymouthd).
>> [ 185.841257] myhost dracut-initqueue[340]: Warning: /dev/VolGroup00/root does
>> not exist
>> [ 185.841403] myhost systemd[1]: Starting Dracut Emergency Shell...
>> [ 185.859366] myhost systemd[1]: Received SIGRTMIN+21 from PID 341 (plymouthd).
>>
>> dracut:/# cat "/run/initramfs/rdsosreport.txt"
>> + cat /lib/dracut/dracut-041-10.fc22.1
>> dracut-041-10.fc22.1
>> + cat /proc/cmdline
>> BOOT_IMAGE=/vmlinuz-4.0.4-301.fc22.x86_64 root=/dev/VolGroup00/root ro quiet
>> console=ttyS0,115200n8 rd_NO_PLYMOUTH SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-
>> 8 KEYTABLE=de-latin1
>
> your kernel cmdline seems to be missing the raid configuration
>
> rd.md.uuid=56e9bde4-5cd1-630d-188c-22a54c1c8c37
> rd.md.uuid=eb295015-e20b-e133-15db-5c9130487300
> rd.md.uuid=51e8e983-8786-b868-dbc3-87357e1a9534
>
> ... whatever is needed to boot your system.
>
> # dracut --print-cmdline
>
> should tell you what kernel cmdline parameters are needed
Thank you for the fast reply.
# comment: 3 separate lines!!!!! (maybe a problem)
dracut --print-cmdline
rd.luks.uuid=luks-0c66fc77-a8a0-49e6-b96c-55e886a91f09
rd.lvm.lv=VolGroup00/root
rd.lvm.lv=VolGroup00/swap
rd.md.uuid=51e8e983:8786b868:dbc38735:7e1a9534
rd.md.uuid=56e9bde4:5cd1630d:188c22a5:4c1c8c37
resume=/dev/mapper/VolGroup00-swap root=/dev/mapper/VolGroup00-root
rootflags=rw,relatime,data=ordered rootfstype=ext4
dracut --force 4.0.4-301.fc22.x86_64
Still no correct entry in /etc/grub2.cfg
linux16 /vmlinuz-4.0.4-301.fc22.x86_64 root=/dev/VolGroup00/root ro
quiet console=ttyS0,115200n8 rd_NO_PLYMOUTH SYSFONT=latarcyrheb-sun16
LANG=en_US.UTF-8 KEYTABLE=de-latin1
Looks like a bug to me.
Thank you.
Ciao,
Gerhard
next prev parent reply other threads:[~2015-05-27 12:09 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-27 11:28 Update FC22 - doesn't find root fs and doesn't boot Gerhard Wiesinger
[not found] ` <5565AA58.6000409-tcxHB8FAk+J54TAoqtyWWQ@public.gmane.org>
2015-05-27 11:56 ` Harald Hoyer
[not found] ` <5565B0E6.3050204-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-05-27 12:09 ` Gerhard Wiesinger [this message]
[not found] ` <5565B3E6.4010806-tcxHB8FAk+J54TAoqtyWWQ@public.gmane.org>
2015-05-27 12:13 ` Andrei Borzenkov
[not found] ` <CAA91j0UysOKJG6LpuvCdrh3jcRMdj9+=XaD-R+Shw7WFZSvbUw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-27 12:25 ` Harald Hoyer
[not found] ` <5565B7BF.4010604-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-05-27 12:39 ` Gerhard Wiesinger
[not found] ` <5565BAEA.6080202-tcxHB8FAk+J54TAoqtyWWQ@public.gmane.org>
2015-05-27 12:43 ` Harald Hoyer
[not found] ` <5565BBF8.1050509-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-05-27 13:03 ` Gerhard Wiesinger
[not found] ` <5565C0AC.2070106-tcxHB8FAk+J54TAoqtyWWQ@public.gmane.org>
2015-05-27 13:07 ` Harald Hoyer
[not found] ` <5565C182.30709-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-05-27 13:21 ` Gerhard Wiesinger
[not found] ` <5565C4E7.6010301-tcxHB8FAk+J54TAoqtyWWQ@public.gmane.org>
2015-05-27 13:27 ` Harald Hoyer
[not found] ` <5565C654.3000101-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-05-27 13:33 ` Gerhard Wiesinger
[not found] ` <5565C7AF.70009-tcxHB8FAk+J54TAoqtyWWQ@public.gmane.org>
2015-05-27 17:21 ` Andrew Udvare
2015-05-28 12:19 ` Gerhard Wiesinger
[not found] ` <556707B5.4000707-tcxHB8FAk+J54TAoqtyWWQ@public.gmane.org>
2015-05-31 7:51 ` poma
2015-05-31 18:08 ` Bruno Wolff III
[not found] ` <20150531180858.GA27097-bdMChIhFSYk@public.gmane.org>
2015-06-11 9:06 ` poma
[not found] ` <55794FA1.3070107-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-06-15 9:42 ` Harald Hoyer
[not found] ` <557E9DF5.2070809-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-06-15 10:37 ` poma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5565B3E6.4010806@wiesinger.com \
--to=lists-tcxhb8fak+j54taoqtywwq@public.gmane.org \
--cc=harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=initramfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.