All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiko Schocher <hs@denx.de>
To: Heiko Schocher <hs@denx.de>
Cc: linux-kernel@vger.kernel.org,
	Thierry Reding <thierry.reding@gmail.com>,
	David Airlie <airlied@linux.ie>,
	dri-devel@lists.freedesktop.org
Subject: Re: [PATCH] drm/panel: add lg4573 driver
Date: Thu, 28 May 2015 07:51:09 +0200	[thread overview]
Message-ID: <5566ACCD.9080203@denx.de> (raw)
In-Reply-To: <1430898573-14783-1-git-send-email-hs@denx.de>

Hello,

Am 06.05.2015 09:49, schrieb Heiko Schocher:
> The patch adds LG4573 parallel RGB panel driver with SPI control interface.
> The driver uses drm_panel framework.
>
> Signed-off-by: Heiko Schocher <hs@denx.de>
>
> ---
>
>   .../devicetree/bindings/panel/lg,lg4573.txt        |  42 +++
>   drivers/gpu/drm/panel/Kconfig                      |   8 +
>   drivers/gpu/drm/panel/Makefile                     |   1 +
>   drivers/gpu/drm/panel/panel-lg4573.c               | 367 +++++++++++++++++++++
>   4 files changed, 418 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/panel/lg,lg4573.txt
>   create mode 100644 drivers/gpu/drm/panel/panel-lg4573.c

ping...

bye,
Heiko
>
> diff --git a/Documentation/devicetree/bindings/panel/lg,lg4573.txt b/Documentation/devicetree/bindings/panel/lg,lg4573.txt
> new file mode 100644
> index 0000000..55f495d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/lg,lg4573.txt
> @@ -0,0 +1,42 @@
> +LG LG4573 TFT liquid crystal display with SPI control bus
> +
> +Required properties:
> +  - compatible: "lg4573"
> +  - reg: address of the panel on SPI bus
> +  - display-timings: timings for the connected panel according to [1]
> +
> +The panel must obey rules for SPI slave device specified in document [2].
> +
> +Optional properties:
> +  - power-on-delay: delay after turning regulators on [ms]
> +
> +[1]: Documentation/devicetree/bindings/video/display-timing.txt
> +[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Example:
> +
> +	lcd_panel: display@0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "lg,lg4573";
> +		spi-max-frequency = <10000000>;
> +		reset-gpios = <&gpio2 11 0>;
> +		reg = <0>;
> +		power-on-delay = <10>;
> +		display-timings {
> +			480x800p57 {
> +				native-mode;
> +				clock-frequency = <27000027>;
> +				hactive = <480>;
> +				vactive = <800>;
> +				hfront-porch = <10>;
> +				hback-porch = <59>;
> +				hsync-len = <10>;
> +				vback-porch = <15>;
> +				vfront-porch = <15>;
> +				vsync-len = <15>;
> +				hsync-active = <1>;
> +				vsync-active = <1>;
> +			};
> +		};
> +	};
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 6d64c7b..29c3407 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -23,6 +23,14 @@ config DRM_PANEL_LD9040
>   	depends on OF && SPI
>   	select VIDEOMODE_HELPERS
>
> +config DRM_PANEL_LG4573
> +	tristate "LG4573 RGB/SPI panel"
> +	depends on OF && SPI
> +	select VIDEOMODE_HELPERS
> +	help
> +	  Say Y here if you want to enable support for LG4573 RGB panel.
> +	  To compile this driver as a module, choose M here.
> +
>   config DRM_PANEL_S6E8AA0
>   	tristate "S6E8AA0 DSI video mode panel"
>   	depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 4b2a043..715b95d 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -1,4 +1,5 @@
>   obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
>   obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
> +obj-$(CONFIG_DRM_PANEL_LG4573) += panel-lg4573.o
>   obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
>   obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
> diff --git a/drivers/gpu/drm/panel/panel-lg4573.c b/drivers/gpu/drm/panel/panel-lg4573.c
> new file mode 100644
> index 0000000..9d5e5a5
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-lg4573.c
> @@ -0,0 +1,367 @@
> +/*
> + *
> + * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
> + *
> + * from:
> + * drivers/gpu/drm/panel/panel-ld9040.c
> + * ld9040 AMOLED LCD drm_panel driver.
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd
> + * Derived from drivers/video/backlight/ld9040.c
> + *
> + * Andrzej Hajda <a.hajda@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_panel.h>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +
> +#include <video/mipi_display.h>
> +#include <video/of_videomode.h>
> +#include <video/videomode.h>
> +
> +struct lg4573 {
> +	struct device *dev;
> +	struct drm_panel panel;
> +	u32 power_on_delay;
> +	struct videomode vm;
> +};
> +
> +static inline struct lg4573 *panel_to_lg4573(struct drm_panel *panel)
> +{
> +	return container_of(panel, struct lg4573, panel);
> +}
> +
> +static int lg4573_spi_write_u16(struct lg4573 *ctx, u16 data)
> +{
> +	struct spi_device *spi = to_spi_device(ctx->dev);
> +	struct spi_transfer xfer = {
> +		.len		= 2,
> +	};
> +	struct spi_message msg;
> +	u16 temp = htons(data);
> +
> +	dev_dbg(ctx->dev, "writing data: %x\n", data);
> +	xfer.tx_buf = &temp;
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer, &msg);
> +
> +	return spi_sync(spi, &msg);
> +}
> +
> +static void lg4573_spi_write_u16_array(struct lg4573 *ctx, u16 *buff, int size)
> +{
> +	int idx;
> +
> +	for (idx = 0; idx < size; idx++)
> +		lg4573_spi_write_u16(ctx, buff[idx]);
> +}
> +
> +static void lg4573_display_on(struct lg4573 *ctx)
> +{
> +	static u16 sleep_out = 0x7011;
> +	static u16 display_on = 0x7029;
> +
> +	lg4573_spi_write_u16(ctx, sleep_out);
> +	msleep(ctx->power_on_delay);
> +	lg4573_spi_write_u16(ctx, display_on);
> +}
> +
> +static int lg4573_display_off(struct lg4573 *ctx)
> +{
> +	static u16 display_off = 0x7028;
> +	static u16 sleep_in	= 0x7010;
> +
> +	lg4573_spi_write_u16(ctx, display_off);
> +	msleep(ctx->power_on_delay);
> +	lg4573_spi_write_u16(ctx, sleep_in);
> +	return 0;
> +}
> +
> +static void lg4573_display_mode_settings(struct lg4573 *ctx)
> +{
> +	static u16 display_mode_settings[] = {
> +	  0x703A,
> +	  0x7270,
> +	  0x70B1,
> +	  0x7208,
> +	  0x723B,
> +	  0x720F,
> +	  0x70B2,
> +	  0x7200,
> +	  0x72C8,
> +	  0x70B3,
> +	  0x7200,
> +	  0x70B4,
> +	  0x7200,
> +	  0x70B5,
> +	  0x7242,
> +	  0x7210,
> +	  0x7210,
> +	  0x7200,
> +	  0x7220,
> +	  0x70B6,
> +	  0x720B,
> +	  0x720F,
> +	  0x723C,
> +	  0x7213,
> +	  0x7213,
> +	  0x72E8,
> +	  0x70B7,
> +	  0x7246,
> +	  0x7206,
> +	  0x720C,
> +	  0x7200,
> +	  0x7200,
> +	};
> +
> +	dev_dbg(ctx->dev, "transfer display mode settings\n");
> +	lg4573_spi_write_u16_array(ctx, display_mode_settings,
> +			ARRAY_SIZE(display_mode_settings));
> +}
> +
> +static void lg4573_power_settings(struct lg4573 *ctx)
> +{
> +	static u16 power_settings[] = {
> +	  0x70C0,
> +	  0x7201,
> +	  0x7211,
> +	  0x70C3,
> +	  0x7207,
> +	  0x7203,
> +	  0x7204,
> +	  0x7204,
> +	  0x7204,
> +	  0x70C4,
> +	  0x7212,
> +	  0x7224,
> +	  0x7218,
> +	  0x7218,
> +	  0x7202,
> +	  0x7249,
> +	  0x70C5,
> +	  0x726F,
> +	  0x70C6,
> +	  0x7241,
> +	  0x7263,
> +	};
> +
> +	dev_dbg(ctx->dev, "transfer power settings\n");
> +	lg4573_spi_write_u16_array(ctx, power_settings,
> +			ARRAY_SIZE(power_settings));
> +}
> +
> +static void lg4573_gamma_settings(struct lg4573 *ctx)
> +{
> +	static u16 gamma_settings[] = {
> +	  0x70D0,
> +	  0x7203,
> +	  0x7207,
> +	  0x7273,
> +	  0x7235,
> +	  0x7200,
> +	  0x7201,
> +	  0x7220,
> +	  0x7200,
> +	  0x7203,
> +	  0x70D1,
> +	  0x7203,
> +	  0x7207,
> +	  0x7273,
> +	  0x7235,
> +	  0x7200,
> +	  0x7201,
> +	  0x7220,
> +	  0x7200,
> +	  0x7203,
> +	  0x70D2,
> +	  0x7203,
> +	  0x7207,
> +	  0x7273,
> +	  0x7235,
> +	  0x7200,
> +	  0x7201,
> +	  0x7220,
> +	  0x7200,
> +	  0x7203,
> +	  0x70D3,
> +	  0x7203,
> +	  0x7207,
> +	  0x7273,
> +	  0x7235,
> +	  0x7200,
> +	  0x7201,
> +	  0x7220,
> +	  0x7200,
> +	  0x7203,
> +	  0x70D4,
> +	  0x7203,
> +	  0x7207,
> +	  0x7273,
> +	  0x7235,
> +	  0x7200,
> +	  0x7201,
> +	  0x7220,
> +	  0x7200,
> +	  0x7203,
> +	  0x70D5,
> +	  0x7203,
> +	  0x7207,
> +	  0x7273,
> +	  0x7235,
> +	  0x7200,
> +	  0x7201,
> +	  0x7220,
> +	  0x7200,
> +	  0x7203,
> +	};
> +
> +	dev_dbg(ctx->dev, "transfer gamma settings\n");
> +	lg4573_spi_write_u16_array(ctx, gamma_settings,
> +			ARRAY_SIZE(gamma_settings));
> +}
> +
> +static void lg4573_init(struct lg4573 *ctx)
> +{
> +	dev_dbg(ctx->dev, "initializing LCD\n");
> +
> +	lg4573_display_mode_settings(ctx);
> +	lg4573_power_settings(ctx);
> +	lg4573_gamma_settings(ctx);
> +}
> +
> +static int lg4573_power_on(struct lg4573 *ctx)
> +{
> +	msleep(ctx->power_on_delay);
> +	lg4573_display_on(ctx);
> +	return 0;
> +}
> +
> +static int lg4573_disable(struct drm_panel *panel)
> +{
> +	struct lg4573 *ctx = panel_to_lg4573(panel);
> +
> +	return lg4573_display_off(ctx);
> +}
> +
> +static int lg4573_enable(struct drm_panel *panel)
> +{
> +	struct lg4573 *ctx = panel_to_lg4573(panel);
> +	int ret;
> +
> +	lg4573_init(ctx);
> +
> +	ret = lg4573_power_on(ctx);
> +
> +	return ret;
> +}
> +
> +static int lg4573_get_modes(struct drm_panel *panel)
> +{
> +	struct drm_connector *connector = panel->connector;
> +	struct lg4573 *ctx = panel_to_lg4573(panel);
> +	struct drm_display_mode *mode;
> +
> +	mode = drm_mode_create(connector->dev);
> +	if (!mode) {
> +		DRM_ERROR("failed to create a new display mode\n");
> +		return 0;
> +	}
> +
> +	drm_display_mode_from_videomode(&ctx->vm, mode);
> +
> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +	drm_mode_probed_add(connector, mode);
> +
> +	return 1;
> +}
> +
> +static const struct drm_panel_funcs lg4573_drm_funcs = {
> +	.disable = lg4573_disable,
> +	.enable = lg4573_enable,
> +	.get_modes = lg4573_get_modes,
> +};
> +
> +static int lg4573_parse_dt(struct lg4573 *ctx)
> +{
> +	struct device *dev = ctx->dev;
> +	struct device_node *np = dev->of_node;
> +	int ret;
> +
> +	ret = of_get_videomode(np, &ctx->vm, 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	of_property_read_u32(np, "power-on-delay", &ctx->power_on_delay);
> +
> +	return 0;
> +}
> +
> +static int lg4573_probe(struct spi_device *spi)
> +{
> +	struct device *dev = &spi->dev;
> +	struct lg4573 *ctx;
> +	int ret;
> +
> +	ctx = devm_kzalloc(dev, sizeof(struct lg4573), GFP_KERNEL);
> +	if (!ctx)
> +		return -ENOMEM;
> +
> +	spi_set_drvdata(spi, ctx);
> +	ctx->dev = dev;
> +
> +	ret = lg4573_parse_dt(ctx);
> +	if (ret < 0)
> +		return ret;
> +
> +	spi->bits_per_word = 8;
> +	ret = spi_setup(spi);
> +	if (ret < 0) {
> +		dev_err(dev, "spi setup failed.\n");
> +		return ret;
> +	}
> +
> +	drm_panel_init(&ctx->panel);
> +	ctx->panel.dev = dev;
> +	ctx->panel.funcs = &lg4573_drm_funcs;
> +
> +	return drm_panel_add(&ctx->panel);
> +}
> +
> +static int lg4573_remove(struct spi_device *spi)
> +{
> +	struct lg4573 *ctx = spi_get_drvdata(spi);
> +
> +	lg4573_display_off(ctx);
> +	drm_panel_remove(&ctx->panel);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id lg4573_of_match[] = {
> +	{ .compatible = "lg,lg4573" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, lg4573_of_match);
> +
> +static struct spi_driver lg4573_driver = {
> +	.probe		= lg4573_probe,
> +	.remove		= lg4573_remove,
> +	.driver = {
> +		.name	= "lg4573",
> +		.owner	= THIS_MODULE,
> +		.of_match_table = lg4573_of_match,
> +	},
> +};
> +module_spi_driver(lg4573_driver);
> +
> +MODULE_AUTHOR("Heiko Schocher <hs@denx.de>");
> +MODULE_DESCRIPTION("lg4573 LCD Driver");
> +MODULE_LICENSE("GPL v2");
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

  reply	other threads:[~2015-05-28  5:51 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-06  7:49 [PATCH] drm/panel: add lg4573 driver Heiko Schocher
2015-05-28  5:51 ` Heiko Schocher [this message]
2015-06-05 12:19 ` Thierry Reding
2015-06-05 12:19   ` Thierry Reding
2015-06-08  8:13   ` Heiko Schocher
2015-06-08 14:13     ` Thierry Reding
2015-06-08 14:13       ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5566ACCD.9080203@denx.de \
    --to=hs@denx.de \
    --cc=airlied@linux.ie \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.