All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Henningsson <david.henningsson@canonical.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, 1454235@bugs.launchpad.net
Subject: Re: [PATCH] ALSA: hda - Disable Headphone Mic boost for ALC662
Date: Thu, 28 May 2015 09:25:41 +0200	[thread overview]
Message-ID: <5566C2F5.2090705@canonical.com> (raw)
In-Reply-To: <s5h4mmxcgq7.wl-tiwai@suse.de>



On 2015-05-28 09:18, Takashi Iwai wrote:
> At Thu, 28 May 2015 09:15:46 +0200,
> David Henningsson wrote:
>>
>> When headphone mic boost is above zero, some 10 - 20 second delay
>> might occur before the headphone mic is operational.
>> Therefore disable the headphone mic boost control (recording gain is
>> sufficient even without it).
>>
>> (Note: this patch is not about the headset mic, it's about the less
>> common mic-in only mode.)
>>
>> BugLink: https://bugs.launchpad.net/bugs/1454235
>> Suggested-by: Kailang Yang <kailang@realtek.com>
>> Signed-off-by: David Henningsson <david.henningsson@canonical.com>
>> ---
>>   sound/pci/hda/patch_realtek.c | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
>> index d0fa455..87605fc 100644
>> --- a/sound/pci/hda/patch_realtek.c
>> +++ b/sound/pci/hda/patch_realtek.c
>> @@ -4240,6 +4240,10 @@ static void alc_fixup_headset_mode_alc662(struct hda_codec *codec,
>>   	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
>>   		spec->parse_flags |= HDA_PINCFG_HEADSET_MIC;
>>   		spec->gen.hp_mic = 1; /* Mic-in is same pin as headphone */
>> +
>> +		/* Disable boost for mic-in permanently */
>> +		snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000);
>> +		snd_hda_override_wcaps(codec, 0x1b, get_wcaps(codec, 0x1b) & ~AC_WCAP_IN_AMP);
>
> Can we really hard-code NID 0x1b here...?

alc_fixup_headset_mode_alc662 is currently only called from a pin fixup 
quirk (via ALC662_FIXUP_DELL_MIC_NO_PRESENCE), and that pin quirk has 
headphone at 0x1b, so yes.

It would we better if we could make it more generic, but I think doing 
this at HDA_FIXUP_PROBE instead would be too late (the boost control, 
paths, etc, would already be created)...?

Do you have a better suggestion?

-- 
David Henningsson, Canonical Ltd.
https://launchpad.net/~diwic

  reply	other threads:[~2015-05-28  7:25 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-28  7:15 [PATCH] ALSA: hda - Disable Headphone Mic boost for ALC662 David Henningsson
2015-05-28  7:18 ` Takashi Iwai
2015-05-28  7:25   ` David Henningsson [this message]
2015-05-28  7:30     ` Takashi Iwai
  -- strict thread matches above, loose matches on Subject: below --
2015-05-28  7:40 David Henningsson
2015-05-28  8:07 ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5566C2F5.2090705@canonical.com \
    --to=david.henningsson@canonical.com \
    --cc=1454235@bugs.launchpad.net \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.