Re: [PATCH bluetooth-next 2/3] cc2520: update initial transmit power value

[Varka Bhadram <varkabhadram@gmail.com>]

On 05/28/2015 12:20 PM, Varka Bhadram wrote:

> CC2520 has the default 0dBm transmit power level  on reset.
> This patch update initial value of transmit power with 0dBm value.

CC2520 has the 0dBm value on reset, but in the driver we are setting
tx power value to 5dBm.

> Signed-off-by: Varka Bhadram <varkab@cdac.in>
> ---
>   drivers/net/ieee802154/cc2520.c |    2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
> index a20e6d4..94347d4 100644
> --- a/drivers/net/ieee802154/cc2520.c
> +++ b/drivers/net/ieee802154/cc2520.c
> @@ -708,6 +708,8 @@ static int cc2520_register(struct cc2520_private *priv)
>   	priv->hw->phy->supported.tx_powers = cc2520_powers;
>   	priv->hw->phy->supported.tx_powers_size = ARRAY_SIZE(cc2520_powers);
>   
> +	priv->hw->phy->transmit_power = priv->hw->phy->supported.tx_powers[4];
> +

This has to be:

priv->hw->phy->transmit_power = priv->hw->phy->supported.tx_powers[0];

>   	dev_vdbg(&priv->spi->dev, "registered cc2520\n");
>   	ret = ieee802154_register_hw(priv->hw);
>   	if (ret)

-- 
Varka Bhadram