[U-Boot] [PATCH v2] mx6_common: Fix LOADADDR and SYS_TEXT_BASE for MX6SL and MX6SX

[Stefano Babic <sbabic@denx.de>]

Hi Fabio,

On 28/05/2015 16:13, Fabio Estevam wrote:
> Commit 8183058188cd2d942 ("imx6: centralise common boot options in
> mx6_common.h") broke boot on mx6sl and mx6sx by assuming that all mx6
> SoCs use the same LOADADDR/SYS_TEXT_BASE range, which is not correct.
> 
> DDR on mx6sx/mx6sl starts at 0x80000000.
> 
> Adjust LOADADDR/SYS_TEXT_BASE to the proper values for mx6sx/mx6sl,
> so that these SoCs can boot again.
> 
> Also, TQMA6 requires a custom CONFIG_SYS_TEXT_BASE value, so move
> its setting to mx6_common.h.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> Build tested only.
> 
> Changes since v1:
> - Fix build warnings in tqma6
> 
>  include/configs/mx6_common.h | 20 +++++++++++++++++++-
>  include/configs/tqma6.h      |  7 -------
>  2 files changed, 19 insertions(+), 8 deletions(-)
> 
> diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
> index 233c6d2..e69c0dd 100644
> --- a/include/configs/mx6_common.h
> +++ b/include/configs/mx6_common.h
> @@ -53,11 +53,29 @@
>  #define CONFIG_REVISION_TAG
>  
>  /* Boot options */
> +
> +/* place code in last 4 MiB of RAM on TQMA6 */
> +#if defined(CONFIG_TARGET_TQMA6)

If we allow to have board specific #ifdef inside mx6_common, I am afraid
we will get in ashort time the same mess we tried to order now.

What about moving the include in tqma6.h in a later point, I mean, after
CONFIG_SYS_TEXT_BASE is already set ?

mx6_common.h is already well protected and should not redefine something
if it is already set.

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 4c93c9b..4c6ce3e 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -22,8 +22,6 @@

 /* #endif */

-#include "mx6_common.h"
-
 #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
 #define PHYS_SDRAM_SIZE                        (512u * SZ_1M)
 #elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
@@ -398,6 +396,9 @@
  *
  * Now include the baseboard specific configuration
  */
+
+#include "mx6_common.h"
+
 #ifdef CONFIG_MBA6
 #include "tqma6_mba6.h"
:


> +#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
> +#define CONFIG_SYS_TEXT_BASE	0x2fc00000
> +#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
> +#define CONFIG_SYS_TEXT_BASE	0x4fc00000
> +#endif
> +#endif
> +
> +#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL))
> +#define CONFIG_LOADADDR		0x82000000
> +#ifndef CONFIG_SYS_TEXT_BASE
> +#define CONFIG_SYS_TEXT_BASE	0x87800000
> +#endif
> +#else
>  #define CONFIG_LOADADDR		0x12000000
> -#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
>  #ifndef CONFIG_SYS_TEXT_BASE
>  #define CONFIG_SYS_TEXT_BASE	0x17800000
>  #endif
> +#endif
> +#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
> +
>  #ifndef CONFIG_BOOTDELAY
>  #define CONFIG_BOOTDELAY	3
>  #endif
> diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
> index 4c93c9b..f1bf095 100644
> --- a/include/configs/tqma6.h
> +++ b/include/configs/tqma6.h
> @@ -118,13 +118,6 @@
>  #define CONFIG_CMD_ITEST
>  #define CONFIG_CMD_SETEXPR
>  
> -/* place code in last 4 MiB of RAM */
> -#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
> -#define CONFIG_SYS_TEXT_BASE		0x2fc00000
> -#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
> -#define CONFIG_SYS_TEXT_BASE		0x4fc00000
> -#endif
> -
>  #define CONFIG_ENV_SIZE			(SZ_8K)
>  /* Size of malloc() pool */
>  #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * SZ_1M)
> 

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================