From: Eric Sandeen <sandeen@sandeen.net>
To: Eric Sandeen <sandeen@redhat.com>, xfs@oss.sgi.com
Subject: [PATCH 2/4] xfsprogs: add xlog_is_empty() helper
Date: Fri, 29 May 2015 14:06:30 -0500 [thread overview]
Message-ID: <5568B8B6.2050706@sandeen.net> (raw)
In-Reply-To: <5568B7CE.9030709@redhat.com>
xfs_repair and xfs_db both check for a dirty log, using roughly
the same cut and pasted code.
Add a new helper to do this, xlog_is_dirty(), and use it instead.
Note, the helper (and the code before it) is a little odd in that
it (re-)initializes some libxfs_init_t members before proceeding,
I haven't yet worked out if that's necessary or correct, so I've
just kept the same behavior for now. Still, it seems like this
should be done in libxfs_init, or not at all.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
---
db/sb.c | 21 ++++---------------
include/libxlog.h | 2 +
libxlog/util.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++++
repair/phase2.c | 55 +++++++++++----------------------------------------
4 files changed, 75 insertions(+), 59 deletions(-)
diff --git a/db/sb.c b/db/sb.c
index 991478d..f9d39e6 100644
--- a/db/sb.c
+++ b/db/sb.c
@@ -225,8 +225,7 @@ int xlog_recover_do_trans(struct xlog *log, xlog_recover_t *t, int p)
int
sb_logcheck(void)
{
- struct xlog log;
- xfs_daddr_t head_blk, tail_blk;
+ int dirty;
if (mp->m_sb.sb_logstart) {
if (x.logdev && x.logdev != x.ddev) {
@@ -242,25 +241,14 @@ sb_logcheck(void)
}
}
- memset(&log, 0, sizeof(log));
libxfs_buftarg_init(mp, x.ddev, x.logdev, x.rtdev);
- x.logBBsize = XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
- x.logBBstart = XFS_FSB_TO_DADDR(mp, mp->m_sb.sb_logstart);
- x.lbsize = BBSIZE;
- if (xfs_sb_version_hassector(&mp->m_sb))
- x.lbsize <<= (mp->m_sb.sb_logsectlog - BBSHIFT);
-
- log.l_dev = mp->m_logdev_targp;
- log.l_logBBsize = x.logBBsize;
- log.l_logBBstart = x.logBBstart;
- log.l_sectBBsize = BTOBB(x.lbsize);
- log.l_mp = mp;
-
- if (xlog_find_tail(&log, &head_blk, &tail_blk)) {
+
+ dirty = xlog_is_dirty(mp, &x, 0);
+
+ if (dirty == -1) {
dbprintf(_("ERROR: cannot find log head/tail, run xfs_repair\n"));
return 0;
- }
- if (head_blk != tail_blk) {
+ } else if (dirty == 1) {
dbprintf(_(
"ERROR: The filesystem has valuable metadata changes in a log which needs to\n"
"be replayed. Mount the filesystem to replay the log, and unmount it before\n"
@@ -270,6 +258,7 @@ sb_logcheck(void)
"of the filesystem before doing this.\n"), progname);
return 0;
}
+ /* Log is clean */
return 1;
}
diff --git a/include/libxlog.h b/include/libxlog.h
index e6d915c..c6640a8 100644
--- a/include/libxlog.h
+++ b/include/libxlog.h
@@ -83,6 +83,8 @@ extern int print_record_header;
/* libxfs parameters */
extern libxfs_init_t x;
+
+extern int xlog_is_dirty(xfs_mount_t *mp, libxfs_init_t *x, int verbose);
extern struct xfs_buf *xlog_get_bp(struct xlog *, int);
extern void xlog_put_bp(struct xfs_buf *);
extern int xlog_bread(struct xlog *log, xfs_daddr_t blk_no, int nbblks,
diff --git a/libxlog/util.c b/libxlog/util.c
index 053cf04..498c06c 100644
--- a/libxlog/util.c
+++ b/libxlog/util.c
@@ -24,6 +24,62 @@ int print_skip_uuid;
int print_record_header;
libxfs_init_t x;
+/*
+ * Return 1 for dirty, 0 for clean, -1 for errors
+ */
+int
+xlog_is_dirty(
+ xfs_mount_t *mp,
+ libxfs_init_t *x,
+ int verbose)
+{
+ int error;
+ struct xlog log;
+ xfs_daddr_t head_blk, tail_blk;
+
+ memset(&log, 0, sizeof(log));
+
+ /* We (re-)init members of libxfs_init_t here? really? */
+ x->logBBsize = XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
+ x->logBBstart = XFS_FSB_TO_DADDR(mp, mp->m_sb.sb_logstart);
+ x->lbsize = BBSIZE;
+ if (xfs_sb_version_hassector(&mp->m_sb))
+ x->lbsize <<= (mp->m_sb.sb_logsectlog - BBSHIFT);
+
+ log.l_dev = mp->m_logdev_targp;
+ log.l_logBBsize = x->logBBsize;
+ log.l_logBBstart = x->logBBstart;
+ log.l_sectBBsize = BTOBB(x->lbsize);
+ log.l_mp = mp;
+ if (xfs_sb_version_hassector(&mp->m_sb)) {
+ log.l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT;
+ ASSERT(log.l_sectbb_log <= mp->m_sectbb_log);
+ /* for larger sector sizes, must have v2 or external log */
+ ASSERT(log.l_sectbb_log == 0 ||
+ log.l_logBBstart == 0 ||
+ xfs_sb_version_haslogv2(&mp->m_sb));
+ ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT);
+ }
+ log.l_sectbb_mask = (1 << log.l_sectbb_log) - 1;
+
+ if ((error = xlog_find_tail(&log, &head_blk, &tail_blk))) {
+ xlog_warn(_("%s: cannot find log head/tail "
+ "(xlog_find_tail=%d)\n"),
+ __func__, error);
+ return -1;
+ }
+
+ if (verbose)
+ xlog_warn(
+ _("%s: head block %" PRId64 " tail block %" PRId64 "\n"),
+ __func__, head_blk, tail_blk);
+
+ if (head_blk != tail_blk)
+ return 1;
+
+ return 0;
+}
+
static int
header_check_uuid(xfs_mount_t *mp, xlog_rec_header_t *head)
{
diff --git a/repair/phase2.c b/repair/phase2.c
index 983aaa7..a23f472 100644
--- a/repair/phase2.c
+++ b/repair/phase2.c
@@ -38,62 +38,31 @@ int xlog_recover_do_trans(struct xlog *log, xlog_recover_t *t, int p)
static void
zero_log(xfs_mount_t *mp)
{
- int error;
- struct xlog log;
- xfs_daddr_t head_blk, tail_blk;
-
- memset(&log, 0, sizeof(log));
- x.logBBsize = XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
- x.logBBstart = XFS_FSB_TO_DADDR(mp, mp->m_sb.sb_logstart);
- x.lbsize = BBSIZE;
- if (xfs_sb_version_hassector(&mp->m_sb))
- x.lbsize <<= (mp->m_sb.sb_logsectlog - BBSHIFT);
-
- log.l_dev = mp->m_logdev_targp;
- log.l_logBBsize = x.logBBsize;
- log.l_logBBstart = x.logBBstart;
- log.l_sectBBsize = BTOBB(x.lbsize);
- log.l_mp = mp;
- if (xfs_sb_version_hassector(&mp->m_sb)) {
- log.l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT;
- ASSERT(log.l_sectbb_log <= mp->m_sectbb_log);
- /* for larger sector sizes, must have v2 or external log */
- ASSERT(log.l_sectbb_log == 0 ||
- log.l_logBBstart == 0 ||
- xfs_sb_version_haslogv2(&mp->m_sb));
- ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT);
- }
- log.l_sectbb_mask = (1 << log.l_sectbb_log) - 1;
-
- if ((error = xlog_find_tail(&log, &head_blk, &tail_blk))) {
- do_warn(_("zero_log: cannot find log head/tail "
- "(xlog_find_tail=%d), zeroing it anyway\n"),
- error);
- } else {
- if (verbose) {
- do_warn(
- _("zero_log: head block %" PRId64 " tail block %" PRId64 "\n"),
- head_blk, tail_blk);
- }
- if (head_blk != tail_blk) {
- if (zap_log) {
- do_warn(_(
+ int dirty;
+
+ dirty = xlog_is_dirty(mp, &x, verbose);
+
+ if (dirty == -1)
+ do_warn(_("zero_log: cannot find log head/tail, "
+ "zeroing it anyway\n"));
+ else if (dirty == 1) {
+ if (zap_log) {
+ do_warn(_(
"ALERT: The filesystem has valuable metadata changes in a log which is being\n"
"destroyed because the -L option was used.\n"));
- } else {
- do_warn(_(
+ } else {
+ do_warn(_(
"ERROR: The filesystem has valuable metadata changes in a log which needs to\n"
"be replayed. Mount the filesystem to replay the log, and unmount it before\n"
"re-running xfs_repair. If you are unable to mount the filesystem, then use\n"
"the -L option to destroy the log and attempt a repair.\n"
"Note that destroying the log may cause corruption -- please attempt a mount\n"
"of the filesystem before doing this.\n"));
- exit(2);
- }
+ exit(2);
}
}
- libxfs_log_clear(log.l_dev,
+ libxfs_log_clear(mp->m_logdev_targp,
XFS_FSB_TO_DADDR(mp, mp->m_sb.sb_logstart),
(xfs_extlen_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks),
&mp->m_sb.sb_uuid,
-- 1.7.1
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2015-05-29 19:06 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-29 19:02 [PATCH 0/4] xfsprogs: mini patch-bomb Eric Sandeen
2015-05-29 19:03 ` [PATCH 1/4] xfsprogs: remove unused write-only var l_logsize Eric Sandeen
2015-06-03 17:11 ` Brian Foster
2015-05-29 19:06 ` Eric Sandeen [this message]
2015-06-03 17:11 ` [PATCH 2/4] xfsprogs: add xlog_is_empty() helper Brian Foster
2015-05-29 19:13 ` [PATCH 3/4] xfsprogs: rename dont_obfuscate in xfs_metadump Eric Sandeen
2015-06-03 17:11 ` Brian Foster
2015-05-29 19:17 ` [PATCH 4/4] xfsprogs: zero out clean log " Eric Sandeen
2015-06-03 17:11 ` Brian Foster
2015-06-03 20:01 ` Eric Sandeen
2015-06-08 15:06 ` [PATCH 4/4 V2] " Eric Sandeen
2015-06-08 18:29 ` Brian Foster
2015-06-08 18:32 ` Eric Sandeen
2015-06-09 23:35 ` Dave Chinner
2015-06-08 18:46 ` [PATCH 4/4 V3] " Eric Sandeen
2015-06-08 18:50 ` Brian Foster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5568B8B6.2050706@sandeen.net \
--to=sandeen@sandeen.net \
--cc=sandeen@redhat.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.