All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/11] colibri_vf: Add separate defconfig for device tree support
Date: Mon, 01 Jun 2015 09:45:01 +0200	[thread overview]
Message-ID: <556C0D7D.8010009@denx.de> (raw)
In-Reply-To: <1431954389-6433-10-git-send-email-bhuvanchandra.dv@toradex.com>

Hi Bhuvanchandra,

On 18/05/2015 15:06, Bhuvanchandra DV wrote:
> Most of the drivers available for Vybrid are not yet converted
> to OF model to use device tree model, only few drivers
> like SPI and GPIO drivers use device trees.
> Add separate defconfig for who needs to use device tree model.
> Later this can be integrated to single defconfig.
> 
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
> ---
>  configs/colibri_vf_dtb_defconfig | 6 ++++++
>  1 file changed, 6 insertions(+)
>  create mode 100644 configs/colibri_vf_dtb_defconfig
> 
> diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
> new file mode 100644
> index 0000000..28ff1e9
> --- /dev/null
> +++ b/configs/colibri_vf_dtb_defconfig
> @@ -0,0 +1,6 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_COLIBRI_VF=y
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
> +CONFIG_DM=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
> 

This patch is broken because NAND setup is missing and the board
colibri_vf_dtp is not built.

Indeed, it is fixed with:

diff --git a/configs/colibri_vf_dtb_defconfig
b/configs/colibri_vf_dtb_defconfig
index 28ff1e9..88ecbdc 100644
--- a/configs/colibri_vf_dtb_defconfig
+++ b/configs/colibri_vf_dtb_defconfig
@@ -4,3 +4,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_I
 CONFIG_DM=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
+CONFIG_NAND_VF610_NFC=y
+CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y


Please add these to your patch and resubmit, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

  reply	other threads:[~2015-06-01  7:45 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 02/11] dm: gpio: vf610: Add GPIO driver support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 04/11] colibri_vf: Enable GPIO support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 05/11] arm: vf610: Add clock support for DSPI Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 06/11] arm: vf610: Add iomux " Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 07/11] vf610: dts: Add device tree support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
2015-06-01  7:45   ` Stefano Babic [this message]
2015-06-01  8:07     ` Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
2015-05-18 17:09   ` Marek Vasut
2015-05-18 18:52     ` maitysanchayan at gmail.com
2015-05-18 19:04       ` Marek Vasut
2015-05-18 13:06 ` [U-Boot] [PATCH 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
2015-05-24 19:34 ` [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
2015-05-26 11:27   ` Stefano Babic
2015-06-01  5:34     ` Bhuvanchandra DV
2015-06-01  7:17       ` Stefano Babic
2015-06-01  8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
2015-06-01  8:51   ` [U-Boot] [PATCH V2 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
2015-06-01  8:51   ` [U-Boot] [PATCH V2 02/11] dm: gpio: vf610: Add GPIO driver support Bhuvanchandra DV
2015-06-01  8:51   ` [U-Boot] [PATCH V2 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
2015-06-01 10:26     ` Stefan Agner
2015-06-01  8:51   ` [U-Boot] [PATCH V2 04/11] colibri_vf: Enable GPIO support Bhuvanchandra DV
2015-06-01  8:51   ` [U-Boot] [PATCH V2 05/11] arm: vf610: Add clock support for DSPI Bhuvanchandra DV
2015-06-01  8:51   ` [U-Boot] [PATCH V2 06/11] arm: vf610: Add iomux " Bhuvanchandra DV
2015-06-01  8:51   ` [U-Boot] [PATCH V2 07/11] vf610: dts: Add device tree support Bhuvanchandra DV
2015-06-01  8:51   ` [U-Boot] [PATCH V2 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
2015-06-01 10:32     ` Stefan Agner
2015-06-01 12:27       ` Bhuvanchandra DV
2015-06-01  8:51   ` [U-Boot] [PATCH V2 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
2015-06-01 10:35     ` Stefan Agner
2015-06-01 12:28       ` Bhuvanchandra DV
2015-06-01  8:51   ` [U-Boot] [PATCH V2 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
2015-06-01  8:51   ` [U-Boot] [PATCH V2 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
2015-06-01 10:25     ` Stefan Agner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=556C0D7D.8010009@denx.de \
    --to=sbabic@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.