* [U-Boot] [PATCH 0/5] imx: ventana: various cleanups
@ 2015-05-26 18:04 Tim Harvey
2015-05-26 18:04 ` [U-Boot] [PATCH 1/5] imx: ventana: various board-specific GPIO config updates Tim Harvey
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Tim Harvey @ 2015-05-26 18:04 UTC (permalink / raw)
To: u-boot
Here is another series of unrelated minor fixues and cleanups for Ventana
Tim Harvey (5):
imx: ventana: various board-specific GPIO config updates
imx: ventana: make model env var automatic and non-overridable
imx: ventana: make fdt_file1 and fdt_file2 automatic and
non-overridable
imx: ventana: hang if board model could not be determined
imx: ventana: skip mtdparts fixup if no flash
board/gateworks/gw_ventana/common.c | 56 ++++++++++++++++++++---------
board/gateworks/gw_ventana/common.h | 6 +---
board/gateworks/gw_ventana/gw_ventana.c | 41 +++++++++------------
board/gateworks/gw_ventana/gw_ventana_spl.c | 6 ++--
4 files changed, 58 insertions(+), 51 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 1/5] imx: ventana: various board-specific GPIO config updates 2015-05-26 18:04 [U-Boot] [PATCH 0/5] imx: ventana: various cleanups Tim Harvey @ 2015-05-26 18:04 ` Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 2/5] imx: ventana: make model env var automatic and non-overridable Tim Harvey ` (4 subsequent siblings) 5 siblings, 0 replies; 7+ messages in thread From: Tim Harvey @ 2015-05-26 18:04 UTC (permalink / raw) To: u-boot - Added iomux for CAN_STBY and RS484_TEN (GW52xx/GW53xx/GW54xx/GW551x) - Moved iomux of USBHUB_RST# out of board_ehci_hcd_init so that it is done regardless of USB being initialized in bootloader - Added usb_sel iomux/hwconfig for GW552x - Fixed mezzanine DIO for GW54xx - Fixed PANLEDR# for GW54xx - Fixed dio iomux/hwconfig for GW552x - Fixed dio iomux for GW551x - removed redundant #define Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- board/gateworks/gw_ventana/common.c | 56 +++++++++++++++++++++++---------- board/gateworks/gw_ventana/common.h | 6 +--- board/gateworks/gw_ventana/gw_ventana.c | 14 ++++----- 3 files changed, 46 insertions(+), 30 deletions(-) diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 5fa5d6a..d406c83 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -191,7 +191,8 @@ static iomux_v3_cfg_t const gw52xx_gpio_pads[] = { IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), /* IOEXP_IRQ# */ IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), - + /* CAN_STBY */ + IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), /* MX6_LOCLED# */ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), /* GPS_SHDN */ @@ -204,11 +205,17 @@ static iomux_v3_cfg_t const gw52xx_gpio_pads[] = { IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), /* PCI_RST# (GW522x) */ IOMUX_PADS(PAD_EIM_D23__GPIO3_IO23 | DIO_PAD_CFG), + /* RS485_EN */ + IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG), /* PCIESKT_WDIS# */ IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), }; static iomux_v3_cfg_t const gw53xx_gpio_pads[] = { + /* CAN_STBY */ + IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), + /* USB_HUBRST# */ + IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), /* PANLEDG# */ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), /* PANLEDR# */ @@ -227,36 +234,46 @@ static iomux_v3_cfg_t const gw53xx_gpio_pads[] = { IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), /* PCI_RST# */ IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), + /* RS485_EN */ + IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG), /* PCIESKT_WDIS# */ IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), }; static iomux_v3_cfg_t const gw54xx_gpio_pads[] = { + /* CAN_STBY */ + IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), /* PANLEDG# */ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), /* PANLEDR# */ - IOMUX_PADS(PAD_KEY_COL2__GPIO4_IO10 | DIO_PAD_CFG), + IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), /* MX6_LOCLED# */ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), + /* USB_HUBRST# */ + IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16 | DIO_PAD_CFG), /* MIPI_DIO */ IOMUX_PADS(PAD_SD1_DAT3__GPIO1_IO21 | DIO_PAD_CFG), /* RS485_EN */ IOMUX_PADS(PAD_EIM_D24__GPIO3_IO24 | DIO_PAD_CFG), /* IOEXP_PWREN# */ - IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), + IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), /* IOEXP_IRQ# */ - IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), /* DIOI2C_DIS# */ IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), /* PCI_RST# */ IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), /* VID_EN */ IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), + /* RS485_EN */ + IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG), /* PCIESKT_WDIS# */ IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG), }; static iomux_v3_cfg_t const gw551x_gpio_pads[] = { + /* CAN_STBY */ + IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), /* PANLED# */ IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), /* PCI_RST# */ @@ -266,6 +283,10 @@ static iomux_v3_cfg_t const gw551x_gpio_pads[] = { }; static iomux_v3_cfg_t const gw552x_gpio_pads[] = { + /* USBOTG_SEL */ + IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG), + /* USB_HUBRST# */ + IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), /* PANLEDG# */ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), /* PANLEDR# */ @@ -522,12 +543,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .num_pads = ARRAY_SIZE(gw551x_gpio_pads)/2, .dio_cfg = { { - { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, - IMX_GPIO_NR(1, 16), - { 0, 0 }, - 0 - }, - { { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, IMX_GPIO_NR(1, 19), { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, @@ -539,12 +554,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, 3 }, - { - { IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18) }, - IMX_GPIO_NR(1, 18), - { IOMUX_PADS(PAD_SD1_CMD__PWM4_OUT) }, - 4 - }, }, .num_gpios = 2, .leds = { @@ -560,6 +569,12 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .num_pads = ARRAY_SIZE(gw552x_gpio_pads)/2, .dio_cfg = { { + { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, + IMX_GPIO_NR(1, 16), + { 0, 0 }, + 0 + }, + { { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, IMX_GPIO_NR(1, 19), { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, @@ -571,6 +586,12 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, 3 }, + { + {IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) }, + IMX_GPIO_NR(1, 20), + { 0, 0 }, + 0 + }, }, .num_gpios = 4, .leds = { @@ -579,6 +600,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { IMX_GPIO_NR(4, 15), }, .pcie_rst = IMX_GPIO_NR(1, 29), + .usb_sel = IMX_GPIO_NR(1, 7), .wdis = IMX_GPIO_NR(7, 12), }, }; @@ -712,7 +734,7 @@ void setup_board_gpio(int board, struct ventana_board_info *info) * Configure DIO pinmux/padctl registers * see IMX6DQRM/IMX6SDLRM IOMUXC_SW_PAD_CTL_PAD_* register definitions */ - for (i = 0; i < 4; i++) { + for (i = 0; i < gpio_cfg[board].num_gpios; i++) { struct dio_cfg *cfg = &gpio_cfg[board].dio_cfg[i]; iomux_v3_cfg_t ctrl = DIO_PAD_CFG; unsigned cputype = is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1; diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h index b7c0e96..28f5816 100644 --- a/board/gateworks/gw_ventana/common.h +++ b/board/gateworks/gw_ventana/common.h @@ -34,10 +34,6 @@ PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) -#define DIO_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_34ohm | PAD_CTL_HYS | PAD_CTL_SRE_FAST) - #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE | PAD_CTL_SRE_FAST) @@ -46,7 +42,7 @@ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_34ohm | PAD_CTL_HYS | PAD_CTL_SRE_FAST) -#define DIO_PAD_CFG (MUX_PAD_CTRL(DIO_PAD_CTRL) | MUX_MODE_SION) +#define DIO_PAD_CFG (MUX_PAD_CTRL(IRQ_PAD_CTRL) | MUX_MODE_SION) #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 22f3b38..ae3cc84 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -157,20 +157,18 @@ static iomux_v3_cfg_t const usb_pads[] = { int board_ehci_hcd_init(int port) { - struct ventana_board_info *info = &ventana_info; int gpio; SETUP_IOMUX_PADS(usb_pads); - /* Reset USB HUB (present on GW54xx/GW53xx) */ - switch (info->model[3]) { - case '3': /* GW53xx */ - case '5': /* GW552x */ - SETUP_IOMUX_PAD(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG); + /* Reset USB HUB */ + switch (board_type) { + case GW53xx: + case GW552x: gpio = (IMX_GPIO_NR(1, 9)); break; - case '4': /* GW54xx */ - SETUP_IOMUX_PAD(PAD_SD1_DAT0__GPIO1_IO16 | DIO_PAD_CFG); + case GW54proto: + case GW54xx: gpio = (IMX_GPIO_NR(1, 16)); break; default: -- 1.9.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 2/5] imx: ventana: make model env var automatic and non-overridable 2015-05-26 18:04 [U-Boot] [PATCH 0/5] imx: ventana: various cleanups Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 1/5] imx: ventana: various board-specific GPIO config updates Tim Harvey @ 2015-05-26 18:04 ` Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 3/5] imx: ventana: make fdt_file1 and fdt_file2 " Tim Harvey ` (3 subsequent siblings) 5 siblings, 0 replies; 7+ messages in thread From: Tim Harvey @ 2015-05-26 18:04 UTC (permalink / raw) To: u-boot We want to model env var to always reflect what was in the EEPROM. There is no point in allowing a user to override this. Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- board/gateworks/gw_ventana/gw_ventana.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index ae3cc84..e3737d1 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -685,8 +685,7 @@ int misc_init_r(void) memset(str, 0, sizeof(str)); for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++) str[i] = tolower(info->model[i]); - if (!getenv("model")) - setenv("model", str); + setenv("model", str); if (!getenv("fdt_file")) { sprintf(fdt, "%s-%s.dtb", cputype, str); setenv("fdt_file", fdt); @@ -827,10 +826,6 @@ int ft_board_setup(void *blob, bd_t *bd) printf(" Set display timings for %s...\n", display); } - if (!model) { - puts("invalid board info: Leaving FDT fully enabled\n"); - return 0; - } printf(" Adjusting FDT per EEPROM for %s...\n", model); /* board serial number */ -- 1.9.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 3/5] imx: ventana: make fdt_file1 and fdt_file2 automatic and non-overridable 2015-05-26 18:04 [U-Boot] [PATCH 0/5] imx: ventana: various cleanups Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 1/5] imx: ventana: various board-specific GPIO config updates Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 2/5] imx: ventana: make model env var automatic and non-overridable Tim Harvey @ 2015-05-26 18:04 ` Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 4/5] imx: ventana: hang if board model could not be determined Tim Harvey ` (2 subsequent siblings) 5 siblings, 0 replies; 7+ messages in thread From: Tim Harvey @ 2015-05-26 18:04 UTC (permalink / raw) To: u-boot The fdt_file1 and fdt_file2 vars provide fallbacks for the fdt file loading script. There is no need to allow the user to override these as if they want to specify the fdt, they should do so in the first attempt which is the fdt_file var. Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- board/gateworks/gw_ventana/gw_ventana.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index e3737d1..221069f 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -695,18 +695,14 @@ int misc_init_r(void) *p++ = 0; setenv("model_base", str); - if (!getenv("fdt_file1")) { - sprintf(fdt, "%s-%s.dtb", cputype, str); - setenv("fdt_file1", fdt); - } + sprintf(fdt, "%s-%s.dtb", cputype, str); + setenv("fdt_file1", fdt); if (board_type != GW551x && board_type != GW552x) str[4] = 'x'; str[5] = 'x'; str[6] = 0; - if (!getenv("fdt_file2")) { - sprintf(fdt, "%s-%s.dtb", cputype, str); - setenv("fdt_file2", fdt); - } + sprintf(fdt, "%s-%s.dtb", cputype, str); + setenv("fdt_file2", fdt); } /* initialize env from EEPROM */ -- 1.9.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 4/5] imx: ventana: hang if board model could not be determined 2015-05-26 18:04 [U-Boot] [PATCH 0/5] imx: ventana: various cleanups Tim Harvey ` (2 preceding siblings ...) 2015-05-26 18:04 ` [U-Boot] [PATCH 3/5] imx: ventana: make fdt_file1 and fdt_file2 " Tim Harvey @ 2015-05-26 18:04 ` Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 5/5] imx: ventana: skip mtdparts fixup if no flash Tim Harvey 2015-06-01 7:50 ` [U-Boot] [PATCH 0/5] imx: ventana: various cleanups Stefano Babic 5 siblings, 0 replies; 7+ messages in thread From: Tim Harvey @ 2015-05-26 18:04 UTC (permalink / raw) To: u-boot If the EEPROM could not be read or is corrupt we always want to hang. Note that an error message will have been displayed by read_eeprom in this case. Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- board/gateworks/gw_ventana/gw_ventana_spl.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index 9f5d2b1..d4418e5 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -515,10 +515,8 @@ void board_init_f(ulong dummy) setup_iomux_gpio(board_model, &ventana_info); /* provide some some default: 32bit 128MB */ - if (GW_UNKNOWN == board_model) { - ventana_info.sdram_width = 2; - ventana_info.sdram_size = 3; - } + if (GW_UNKNOWN == board_model) + hang(); /* configure MMDC for SDRAM width/size and per-model calibration */ spl_dram_init(8 << ventana_info.sdram_width, -- 1.9.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 5/5] imx: ventana: skip mtdparts fixup if no flash 2015-05-26 18:04 [U-Boot] [PATCH 0/5] imx: ventana: various cleanups Tim Harvey ` (3 preceding siblings ...) 2015-05-26 18:04 ` [U-Boot] [PATCH 4/5] imx: ventana: hang if board model could not be determined Tim Harvey @ 2015-05-26 18:04 ` Tim Harvey 2015-06-01 7:50 ` [U-Boot] [PATCH 0/5] imx: ventana: various cleanups Stefano Babic 5 siblings, 0 replies; 7+ messages in thread From: Tim Harvey @ 2015-05-26 18:04 UTC (permalink / raw) To: u-boot This avoids an error message on NAND-less boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- board/gateworks/gw_ventana/gw_ventana.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 221069f..3b7c82b 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -811,9 +811,11 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } - /* Update partition nodes using info from mtdparts env var */ - puts(" Updating MTD partitions...\n"); - fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); + if (test_bit(EECONFIG_NAND, info->config)) { + /* Update partition nodes using info from mtdparts env var */ + puts(" Updating MTD partitions...\n"); + fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); + } /* Update display timings from display env var */ if (display) { -- 1.9.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 0/5] imx: ventana: various cleanups 2015-05-26 18:04 [U-Boot] [PATCH 0/5] imx: ventana: various cleanups Tim Harvey ` (4 preceding siblings ...) 2015-05-26 18:04 ` [U-Boot] [PATCH 5/5] imx: ventana: skip mtdparts fixup if no flash Tim Harvey @ 2015-06-01 7:50 ` Stefano Babic 5 siblings, 0 replies; 7+ messages in thread From: Stefano Babic @ 2015-06-01 7:50 UTC (permalink / raw) To: u-boot Hi Tim, On 26/05/2015 20:04, Tim Harvey wrote: > Here is another series of unrelated minor fixues and cleanups for Ventana > > Tim Harvey (5): > imx: ventana: various board-specific GPIO config updates > imx: ventana: make model env var automatic and non-overridable > imx: ventana: make fdt_file1 and fdt_file2 automatic and > non-overridable > imx: ventana: hang if board model could not be determined > imx: ventana: skip mtdparts fixup if no flash > > board/gateworks/gw_ventana/common.c | 56 ++++++++++++++++++++--------- > board/gateworks/gw_ventana/common.h | 6 +--- > board/gateworks/gw_ventana/gw_ventana.c | 41 +++++++++------------ > board/gateworks/gw_ventana/gw_ventana_spl.c | 6 ++-- > 4 files changed, 58 insertions(+), 51 deletions(-) > Whole series applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-06-01 7:50 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-05-26 18:04 [U-Boot] [PATCH 0/5] imx: ventana: various cleanups Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 1/5] imx: ventana: various board-specific GPIO config updates Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 2/5] imx: ventana: make model env var automatic and non-overridable Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 3/5] imx: ventana: make fdt_file1 and fdt_file2 " Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 4/5] imx: ventana: hang if board model could not be determined Tim Harvey 2015-05-26 18:04 ` [U-Boot] [PATCH 5/5] imx: ventana: skip mtdparts fixup if no flash Tim Harvey 2015-06-01 7:50 ` [U-Boot] [PATCH 0/5] imx: ventana: various cleanups Stefano Babic
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.