From: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 08/11] colibri-vf: Enable SPI support
Date: Mon, 1 Jun 2015 17:57:17 +0530 [thread overview]
Message-ID: <556C4FA5.2010209@toradex.com> (raw)
In-Reply-To: <b4775c9e4ad027153983683637f138c6@agner.ch>
Hello Stefan,
On 06/01/2015 04:02 PM, Stefan Agner wrote:
> On 2015-06-01 10:51, Bhuvanchandra DV wrote:
>> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
>> ---
>> include/configs/colibri_vf.h | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
>> index 195102b..3e57417 100644
>> --- a/include/configs/colibri_vf.h
>> +++ b/include/configs/colibri_vf.h
>> @@ -272,4 +272,15 @@
>> #define CONFIG_USB_GADGET_MASS_STORAGE
>> #define CONFIG_CMD_USB_MASS_STORAGE
>>
>> +/* Enable SPI support */
>> +#define CONFIG_DM_SPI
>> +#define CONFIG_CMD_SPI
>> +#define CONFIG_FSL_DSPI
>> +
>> +#ifndef CONFIG_OF_CONTROL
>> +#undef CONFIG_DM_SPI
>> +#undef CONFIG_CMD_SPI
>> +#undef CONFIG_FSL_DSPI
>> +#endif
>> +
>> #endif /* __CONFIG_H */
>
> Hm, any specific reason we need to define them unconditionally first?
>
> Couldn't we just inverse the logic and safe the undefs?
>
> #ifdef CONFIG_OF_CONTROL
> #define CONFIG_DM_SPI
> #define CONFIG_CMD_SPI
> #define CONFIG_FSL_DSPI
> #endif
>
Agreed to inverse the logic, as in both the above cases DSPI support is
enabled by default when OF_CONTROL was defined. Your suggestion sounds
good. Will update it accordingly, thanks!
> --
> Stefan
>
Best regards,
Bhuvan
next prev parent reply other threads:[~2015-06-01 12:27 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 02/11] dm: gpio: vf610: Add GPIO driver support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 04/11] colibri_vf: Enable GPIO support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 05/11] arm: vf610: Add clock support for DSPI Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 06/11] arm: vf610: Add iomux " Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 07/11] vf610: dts: Add device tree support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
2015-06-01 7:45 ` Stefano Babic
2015-06-01 8:07 ` Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
2015-05-18 17:09 ` Marek Vasut
2015-05-18 18:52 ` maitysanchayan at gmail.com
2015-05-18 19:04 ` Marek Vasut
2015-05-18 13:06 ` [U-Boot] [PATCH 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
2015-05-24 19:34 ` [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
2015-05-26 11:27 ` Stefano Babic
2015-06-01 5:34 ` Bhuvanchandra DV
2015-06-01 7:17 ` Stefano Babic
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 02/11] dm: gpio: vf610: Add GPIO driver support Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
2015-06-01 10:26 ` Stefan Agner
2015-06-01 8:51 ` [U-Boot] [PATCH V2 04/11] colibri_vf: Enable GPIO support Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 05/11] arm: vf610: Add clock support for DSPI Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 06/11] arm: vf610: Add iomux " Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 07/11] vf610: dts: Add device tree support Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
2015-06-01 10:32 ` Stefan Agner
2015-06-01 12:27 ` Bhuvanchandra DV [this message]
2015-06-01 8:51 ` [U-Boot] [PATCH V2 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
2015-06-01 10:35 ` Stefan Agner
2015-06-01 12:28 ` Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
2015-06-01 10:25 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=556C4FA5.2010209@toradex.com \
--to=bhuvanchandra.dv@toradex.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.