[PATCH net-next v2 10/14] sfc: suppress vadaptor stats when EVB is not present

[Shradha Shah <sshah@solarflare.com>]

From: Daniel Pieczko <dpieczko@solarflare.com>

The raw_mask array is not initialised, so it needs to be
explicitly set to zero in the 'else' branch.

If the EVB capability is not present, a port cannot have multiple
functions so the per-port MAC stats are correct and should match
the corresponding vadaptor stats, so this redundancy can be
removed from the ethtool stats output.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
---
 drivers/net/ethernet/sfc/ef10.c      | 12 +++++++++---
 drivers/net/ethernet/sfc/mcdi_pcol.h |  2 ++
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index cb4c972..39d0cf1 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -1161,13 +1161,19 @@ static u64 efx_ef10_raw_stat_mask(struct efx_nic *efx)
 
 static void efx_ef10_get_stat_mask(struct efx_nic *efx, unsigned long *mask)
 {
+	struct efx_ef10_nic_data *nic_data = efx->nic_data;
 	u64 raw_mask[2];
 
 	raw_mask[0] = efx_ef10_raw_stat_mask(efx);
 
-	/* All functions see the vadaptor stats */
-	raw_mask[0] |= ~((1ULL << EF10_STAT_rx_unicast) - 1);
-	raw_mask[1] = (1ULL << (EF10_STAT_COUNT - 63)) - 1;
+	/* Only show vadaptor stats when EVB capability is present */
+	if (nic_data->datapath_caps &
+	    (1 << MC_CMD_GET_CAPABILITIES_OUT_EVB_LBN)) {
+		raw_mask[0] |= ~((1ULL << EF10_STAT_rx_unicast) - 1);
+		raw_mask[1] = (1ULL << (EF10_STAT_COUNT - 63)) - 1;
+	} else {
+		raw_mask[1] = 0;
+	}
 
 #if BITS_PER_LONG == 64
 	mask[0] = raw_mask[0];
diff --git a/drivers/net/ethernet/sfc/mcdi_pcol.h b/drivers/net/ethernet/sfc/mcdi_pcol.h
index 181978d..45fca9f 100644
--- a/drivers/net/ethernet/sfc/mcdi_pcol.h
+++ b/drivers/net/ethernet/sfc/mcdi_pcol.h
@@ -5600,6 +5600,8 @@
 #define        MC_CMD_GET_CAPABILITIES_OUT_MCAST_FILTER_CHAINING_WIDTH 1
 #define        MC_CMD_GET_CAPABILITIES_OUT_PM_AND_RXDP_COUNTERS_LBN 27
 #define        MC_CMD_GET_CAPABILITIES_OUT_PM_AND_RXDP_COUNTERS_WIDTH 1
+#define        MC_CMD_GET_CAPABILITIES_OUT_EVB_LBN 30
+#define        MC_CMD_GET_CAPABILITIES_OUT_EVB_WIDTH 1
 /* RxDPCPU firmware id. */
 #define       MC_CMD_GET_CAPABILITIES_OUT_RX_DPCPU_FW_ID_OFST 4
 #define       MC_CMD_GET_CAPABILITIES_OUT_RX_DPCPU_FW_ID_LEN 2