diff for duplicates of <557946B0.4060308@redhat.com> diff --git a/a/1.txt b/N1/1.txt index c451452..c79d448 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -26,7 +26,7 @@ On 11-06-15 09:56, Hans de Goede wrote: >>> While updating the devicetree binding documentation also add documentation >>> for the sofar undocumented usage of regulators for vbus for all 3 phys. >>> ->>> Signed-off-by: Hans de Goede <hdegoede@redhat.com> +>>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> >>> --- >>> Changes in v2: >>> -Removed the sunxi specific phy functions, instead the id / vbus gpio polling @@ -59,7 +59,7 @@ On 11-06-15 09:56, Hans de Goede wrote: >>> +- usb2_vbus-supply : regulator phandle for controller usb2 vbus >>> + >>> Example: ->>> usbphy: phy at 0x01c13400 { +>>> usbphy: phy@0x01c13400 { >>> #phy-cells = <1>; >>> @@ -32,6 +39,13 @@ Example: >>> reg-names = "phy_ctrl", "pmu1", "pmu2"; diff --git a/a/content_digest b/N1/content_digest index 184aec0..3f17cf9 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -2,10 +2,20 @@ "ref\01433088626-8858-2-git-send-email-hdegoede@redhat.com\0" "ref\055792122.20607@ti.com\0" "ref\055793F41.7000304@redhat.com\0" - "From\0hdegoede@redhat.com (Hans de Goede)\0" - "Subject\0[PATCH v4 1/2] phy-sun4i-usb: Add full support for usb0 phy / OTG\0" + "ref\055793F41.7000304-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org\0" + "From\0Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\0" + "Subject\0Re: [PATCH v4 1/2] phy-sun4i-usb: Add full support for usb0 phy / OTG\0" "Date\0Thu, 11 Jun 2015 10:28:32 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0kishon-l0cyMroinI0@public.gmane.org" + " Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>\0" + "Cc\0Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>" + Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> + Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> + linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org + " Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>\0" "\00:1\0" "b\0" "Hi,\n" @@ -36,7 +46,7 @@ ">>> While updating the devicetree binding documentation also add documentation\n" ">>> for the sofar undocumented usage of regulators for vbus for all 3 phys.\n" ">>>\n" - ">>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>\n" + ">>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\n" ">>> ---\n" ">>> Changes in v2:\n" ">>> -Removed the sunxi specific phy functions, instead the id / vbus gpio polling\n" @@ -69,7 +79,7 @@ ">>> +- usb2_vbus-supply : regulator phandle for controller usb2 vbus\n" ">>> +\n" ">>> Example:\n" - ">>> usbphy: phy at 0x01c13400 {\n" + ">>> usbphy: phy@0x01c13400 {\n" ">>> #phy-cells = <1>;\n" ">>> @@ -32,6 +39,13 @@ Example:\n" ">>> reg-names = \"phy_ctrl\", \"pmu1\", \"pmu2\";\n" @@ -135,4 +145,4 @@ "\n" Hans -49ff33770909ff50be977ec213a403eba6f5eab09de7f091a99844525b5ac6d0 +237dc7f0cfd05c49c532498a9ba395bf161f7e651bdcf4d01cb9ef62d3547324
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.