From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 0/4] spi, sf: add mtdparts feature to spi and sf commands
Date: Tue, 16 Jun 2015 06:30:07 +0200 [thread overview]
Message-ID: <557FA64F.1080104@denx.de> (raw)
In-Reply-To: <CAD6G_RQFf9o=bGZVBfbD_m30ePw2K6GD=3uS9LfBN8WikM3F5w@mail.gmail.com>
Hello Jagan,
Am 11.05.2015 08:01, schrieb Jagan Teki:
> On 11 May 2015 at 11:19, Heiko Schocher <hs@denx.de> wrote:
>> Hello Jagan,
>>
>>
>> Am 27.04.2015 07:42, schrieb Heiko Schocher:
>>>
>>> This patchserie add the popssibility to define mtd partitions on
>>> spi nor flash, and use this settings with the sf commands.
>>>
>>> steps:
>>>
>>> - add MTD layer driver for spi, original patch from:
>>>
>>> http://git.denx.de/?p=u-boot/u-boot-mips.git;a=commitdiff;h=bb246819cdc90493dd7089eaa51b9e639765cced
>>>
>>> and addapted it to current mainline.
>>>
>>> - move common functions to get offset and size from
>>> cmdline nand command to extract offset and size from
>>> a mtd partition to common place "drivers/mtd/mtd_uboot.c"
>>> maybe another place is better?
>>>
>>> - add to the sf command the possibility to use offset and size from
>>> the settings in mtdparts
>>>
>>> With this patchset, the sf command looks now:
>>>
>>> => sf
>>> sf - SPI flash sub-system
>>>
>>> Usage:
>>> sf probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus
>>> and chip select
>>> sf read addr offset|partition len - read `len' bytes starting at
>>> `offset' to memory at `addr'
>>> sf write addr offset|partition len - write `len' bytes from memory
>>> at `addr' to flash at `offset'
>>> sf erase offset|partition [+]len - erase `len' bytes from `offset'
>>> `+len' round up `len' to block
>>> size
>>> sf update addr offset|partition len - erase and write `len' bytes from
>>> memory
>>> at `addr' to flash at `offset'
>>> =>
>>> for example "env" is defined in mtdparts:
>>>
>>> => sf read 13000000 env
>>> device 0 offset 0xd0000, size 0x10000
>>> SF: 65536 bytes @ 0xd0000 Read: OK
>>> =>
>>>
>>> There are the followings checkpatch warnings:
>>>
>>> CHECK: Alignment should match open parenthesis
>>> + if (arg_off(argv[2], &idx, &addr, &maxsize, &maxsize,
>>> + MTD_DEV_TYPE_NAND, nand_info[idx].size)) {
>>>
>>> CHECK: Alignment should match open parenthesis
>>> + if (arg_off(argv[3], &dev, &off, &size, &maxsize,
>>> + MTD_DEV_TYPE_NAND, nand_info[dev].size))
>>>
>>> CHECK: Alignment should match open parenthesis
>>> + if (arg_off_size(argc - 3, argv + 3, &dev, &off,
>>> &size,
>>> + &maxsize, MTD_DEV_TYPE_NAND,
>>>
>>> total: 0 errors, 0 warnings, 3 checks, 361 lines checked
>>>
>>> NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX
>>> MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE
>>> USLEEP_RANGE
>>>
>>>
>>> 20140714_ml_mtdparts/0002-mtd-nand-move-common-functions-from-cmd_nand.c-to-co.patch
>>> has style problems, please review.
>>>
>>> I see not, why this warning pops up ...
>>>
>>> resend rebased version of this series, as v3 is pending since
>>> September 2014...
>>>
>>> Changes in v6:
>>> - add comments from Jagan Teki:
>>> new patch in this patchserie, extract this piece
>>> of code into a new patch.
>>>
>>> Changes in v2:
>>> - add comment from Daniel Schwierzeck:
>>> fix compile error from original patch with
>>> "static inline" rather than "static __maybe_unused"
>>> Changes in v3:
>>> - rebase with d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6
>>> - add comments from scott wood:
>>> - align MTD_DEV_TYPE_NAND correct
>>> - remove unnecessary inline
>>> - rework "jffs2 header" problem later
>>> Changes in v4:
>>> - rebased against 385a08a60f042061b004642d6b9bb6cfb794ad5a
>>> Changes in v5:
>>> - add comment from Scott Wood:
>>> keep the continuation line aligned with the arguments
>>>
>>> Changes in v6:
>>> - add comments from Jagan Teki:
>>> move code, which checks if flash pointer is used
>>> into a new patch.
>>> - use #ifdef in Code
>>> - call mtd register before the spi_release_bus
>>> - add Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
>>> - fix Tom Rinis mail addr
>>> - add comment from Scott Wood:
>>> - fix indentation level
>>> - add mtd_ prefix
>>> - move str2off and str2long into common place, as they are no
>>> mtd specific functions and change return value from int to bool
>>> - add comment from Jagan Teki:
>>> - append help text
>>> - add Reviewed-by from Jagannadha Sutradharudu Teki
>>>
>>> Daniel Schwierzeck (1):
>>> mtd, spi: add MTD layer driver
>>>
>>> Heiko Schocher (3):
>>> mtd, nand: move common functions from cmd_nand.c to common place
>>> spi, sf: use offset and size in sf cmd from mtdpartition
>>> mtd, spi: check if flash pointer is used
>>>
>>> README | 3 +
>>> common/cmd_nand.c | 148
>>> +++++++++---------------------------------
>>> common/cmd_onenand.c | 19 ++----
>>> common/cmd_sf.c | 61 +++++++++--------
>>> common/cmd_test.c | 12 +---
>>> drivers/mtd/Makefile | 4 +-
>>> drivers/mtd/mtd_uboot.c | 99 ++++++++++++++++++++++++++++
>>> drivers/mtd/spi/Makefile | 1 +
>>> drivers/mtd/spi/sf_internal.h | 5 ++
>>> drivers/mtd/spi/sf_mtd.c | 104 +++++++++++++++++++++++++++++
>>> drivers/mtd/spi/sf_probe.c | 10 +--
>>> include/linux/mtd/mtd.h | 5 ++
>>> include/vsprintf.h | 2 +
>>> lib/vsprintf.c | 16 +++++
>>> 14 files changed, 317 insertions(+), 172 deletions(-)
>>> create mode 100644 drivers/mtd/mtd_uboot.c
>>> create mode 100644 drivers/mtd/spi/sf_mtd.c
>>
>>
>> I got no more comment for this v6. Are there any more issues?
>> If not I vote for apllying it soon, so we have some tests before
>> the next release... thanks!
>
> Let me give some more time I will test and see any final comments.
>
> I will pick this series, once all fine.
ping?
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
prev parent reply other threads:[~2015-06-16 4:30 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-27 5:42 [U-Boot] [PATCH v6 0/4] spi, sf: add mtdparts feature to spi and sf commands Heiko Schocher
2015-04-27 5:42 ` [U-Boot] [PATCH v6 1/4] mtd, spi: add MTD layer driver Heiko Schocher
2015-05-19 20:09 ` Jagan Teki
2015-05-20 6:46 ` Heiko Schocher
2015-06-16 8:04 ` Jagan Teki
2015-06-16 8:43 ` Heiko Schocher denx
2015-06-16 8:52 ` Jagan Teki
2015-06-16 9:18 ` Heiko Schocher denx
2015-06-16 9:36 ` Jagan Teki
2015-06-16 10:06 ` Daniel Schwierzeck
2015-06-22 6:43 ` Jagan Teki
2015-06-22 11:53 ` Daniel Schwierzeck
2015-06-22 19:59 ` Jagan Teki
2015-04-27 5:42 ` [U-Boot] [PATCH v6 2/4] mtd, nand: move common functions from cmd_nand.c to common place Heiko Schocher
2015-04-27 23:49 ` Scott Wood
2015-04-27 5:42 ` [U-Boot] [PATCH v6 3/4] spi, sf: use offset and size in sf cmd from mtdpartition Heiko Schocher
2015-04-27 5:42 ` [U-Boot] [PATCH v6 4/4] mtd, spi: check if flash pointer is used Heiko Schocher
2015-05-11 5:49 ` [U-Boot] [PATCH v6 0/4] spi, sf: add mtdparts feature to spi and sf commands Heiko Schocher
2015-05-11 6:01 ` Jagan Teki
2015-05-11 6:10 ` Heiko Schocher
2015-06-16 4:30 ` Heiko Schocher [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=557FA64F.1080104@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.