From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] [PATCH v2] ath9k: spectral - simplify max_index calculation
Date: Thu, 18 Jun 2015 17:16:31 +0200 [thread overview]
Message-ID: <5582E0CF.1050804@neratec.com> (raw)
In-Reply-To: <1434626241-1334-1-git-send-email-zefir.kurtisi@neratec.com>
After further discussion with Nick, we better leave spectral as is.
Please ignore / drop this one.
On 06/18/2015 01:17 PM, Zefir Kurtisi wrote:
> The max_index value provided in the spectral data set
> has to be interpreted differently for HT20 and HT40.
> In HT40, the value is given as unsigned index and
> shall be taken as is, while in HT20 it is a signed
> value around bin index 28 and needs to be converted
> to an unsigned index.
>
> This patch simplifies the previous correction and
> prepares the related functions to be shared with
> the DFS module.
>
> Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
> ---
>
> v2: fix conversion offset as reported by Nick Kossifidis
>
> drivers/net/wireless/ath/ath9k/common-spectral.c | 20 ++++++-------
> drivers/net/wireless/ath/ath9k/common-spectral.h | 36 +++++++-----------------
> 2 files changed, 18 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.c b/drivers/net/wireless/ath/ath9k/common-spectral.c
> index a876271..175193d 100644
> --- a/drivers/net/wireless/ath/ath9k/common-spectral.c
> +++ b/drivers/net/wireless/ath/ath9k/common-spectral.c
> @@ -59,8 +59,8 @@ ath_cmn_max_idx_verify_ht20_fft(u8 *sample_end, int bytes_read)
>
> sample = sample_end - SPECTRAL_HT20_SAMPLE_LEN + 1;
>
> - max_index = spectral_max_index(mag_info->all_bins,
> - SPECTRAL_HT20_NUM_BINS);
> + /* in ht20, this is a 6-bit signed number => shift it to 0 */
> + max_index = (spectral_max_index(mag_info->all_bins) ^ 0x20) - 4;
> max_magnitude = spectral_max_magnitude(mag_info->all_bins);
>
> max_exp = mag_info->max_exp & 0xf;
> @@ -100,12 +100,10 @@ ath_cmn_max_idx_verify_ht20_40_fft(u8 *sample_end, int bytes_read)
> sample = sample_end - SPECTRAL_HT20_40_SAMPLE_LEN + 1;
>
> lower_mag = spectral_max_magnitude(mag_info->lower_bins);
> - lower_max_index = spectral_max_index(mag_info->lower_bins,
> - SPECTRAL_HT20_40_NUM_BINS);
> + lower_max_index = spectral_max_index(mag_info->lower_bins);
>
> upper_mag = spectral_max_magnitude(mag_info->upper_bins);
> - upper_max_index = spectral_max_index(mag_info->upper_bins,
> - SPECTRAL_HT20_40_NUM_BINS);
> + upper_max_index = spectral_max_index(mag_info->upper_bins);
>
> max_exp = mag_info->max_exp & 0xf;
>
> @@ -169,8 +167,8 @@ ath_cmn_process_ht20_fft(struct ath_rx_status *rs,
> magnitude = spectral_max_magnitude(mag_info->all_bins);
> fft_sample_20.max_magnitude = __cpu_to_be16(magnitude);
>
> - max_index = spectral_max_index(mag_info->all_bins,
> - SPECTRAL_HT20_NUM_BINS);
> + /* in ht20, this is a 6-bit signed number => shift it to 0 */
> + max_index = (spectral_max_index(mag_info->all_bins) ^ 0x20) - 4;
> fft_sample_20.max_index = max_index;
>
> bitmap_w = spectral_bitmap_weight(mag_info->all_bins);
> @@ -302,12 +300,10 @@ ath_cmn_process_ht20_40_fft(struct ath_rx_status *rs,
> upper_mag = spectral_max_magnitude(mag_info->upper_bins);
> fft_sample_40.upper_max_magnitude = __cpu_to_be16(upper_mag);
>
> - lower_max_index = spectral_max_index(mag_info->lower_bins,
> - SPECTRAL_HT20_40_NUM_BINS);
> + lower_max_index = spectral_max_index(mag_info->lower_bins);
> fft_sample_40.lower_max_index = lower_max_index;
>
> - upper_max_index = spectral_max_index(mag_info->upper_bins,
> - SPECTRAL_HT20_40_NUM_BINS);
> + upper_max_index = spectral_max_index(mag_info->upper_bins);
> fft_sample_40.upper_max_index = upper_max_index;
>
> lower_bitmap_w = spectral_bitmap_weight(mag_info->lower_bins);
> diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.h b/drivers/net/wireless/ath/ath9k/common-spectral.h
> index 998743b..7540835 100644
> --- a/drivers/net/wireless/ath/ath9k/common-spectral.h
> +++ b/drivers/net/wireless/ath/ath9k/common-spectral.h
> @@ -116,33 +116,17 @@ static inline u16 spectral_max_magnitude(u8 *bins)
> (bins[2] & 0x03) << 10;
> }
>
> -/* return the max magnitude from the all/upper/lower bins */
> -static inline u8 spectral_max_index(u8 *bins, int num_bins)
> +/* return the max index from the all/upper/lower bins
> + *
> + * in HT20: 6-bit signed number of range -28 to +27
> + * in HT40: 6-bit unsigned number of range 0 to +63
> + * (upper sub-channel index 0 is DC)
> + *
> + * Correct interpretation of the value has to be done at caller
> + */
> +static inline u8 spectral_max_index(u8 *bins)
> {
> - s8 m = (bins[2] & 0xfc) >> 2;
> - u8 zero_idx = num_bins / 2;
> -
> - /* It's a 5 bit signed int, remove its sign and use one's
> - * complement interpretation to add the sign back to the 8
> - * bit int
> - */
> - if (m & 0x20) {
> - m &= ~0x20;
> - m |= 0xe0;
> - }
> -
> - /* Bring the zero point to the beginning
> - * instead of the middle so that we can use
> - * it for array lookup and that we don't deal
> - * with negative values later
> - */
> - m += zero_idx;
> -
> - /* Sanity check to make sure index is within bounds */
> - if (m < 0 || m > num_bins - 1)
> - m = 0;
> -
> - return m;
> + return (bins[2] & 0xfc) >> 2;
> }
>
> /* return the bitmap weight from the all/upper/lower bins */
>
WARNING: multiple messages have this Message-ID (diff)
From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
To: linux-wireless@vger.kernel.org
Cc: mickflemm@gmail.com, ath9k-devel@venema.h4ckr.net
Subject: Re: [PATCH v2] ath9k: spectral - simplify max_index calculation
Date: Thu, 18 Jun 2015 17:16:31 +0200 [thread overview]
Message-ID: <5582E0CF.1050804@neratec.com> (raw)
In-Reply-To: <1434626241-1334-1-git-send-email-zefir.kurtisi@neratec.com>
After further discussion with Nick, we better leave spectral as is.
Please ignore / drop this one.
On 06/18/2015 01:17 PM, Zefir Kurtisi wrote:
> The max_index value provided in the spectral data set
> has to be interpreted differently for HT20 and HT40.
> In HT40, the value is given as unsigned index and
> shall be taken as is, while in HT20 it is a signed
> value around bin index 28 and needs to be converted
> to an unsigned index.
>
> This patch simplifies the previous correction and
> prepares the related functions to be shared with
> the DFS module.
>
> Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
> ---
>
> v2: fix conversion offset as reported by Nick Kossifidis
>
> drivers/net/wireless/ath/ath9k/common-spectral.c | 20 ++++++-------
> drivers/net/wireless/ath/ath9k/common-spectral.h | 36 +++++++-----------------
> 2 files changed, 18 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.c b/drivers/net/wireless/ath/ath9k/common-spectral.c
> index a876271..175193d 100644
> --- a/drivers/net/wireless/ath/ath9k/common-spectral.c
> +++ b/drivers/net/wireless/ath/ath9k/common-spectral.c
> @@ -59,8 +59,8 @@ ath_cmn_max_idx_verify_ht20_fft(u8 *sample_end, int bytes_read)
>
> sample = sample_end - SPECTRAL_HT20_SAMPLE_LEN + 1;
>
> - max_index = spectral_max_index(mag_info->all_bins,
> - SPECTRAL_HT20_NUM_BINS);
> + /* in ht20, this is a 6-bit signed number => shift it to 0 */
> + max_index = (spectral_max_index(mag_info->all_bins) ^ 0x20) - 4;
> max_magnitude = spectral_max_magnitude(mag_info->all_bins);
>
> max_exp = mag_info->max_exp & 0xf;
> @@ -100,12 +100,10 @@ ath_cmn_max_idx_verify_ht20_40_fft(u8 *sample_end, int bytes_read)
> sample = sample_end - SPECTRAL_HT20_40_SAMPLE_LEN + 1;
>
> lower_mag = spectral_max_magnitude(mag_info->lower_bins);
> - lower_max_index = spectral_max_index(mag_info->lower_bins,
> - SPECTRAL_HT20_40_NUM_BINS);
> + lower_max_index = spectral_max_index(mag_info->lower_bins);
>
> upper_mag = spectral_max_magnitude(mag_info->upper_bins);
> - upper_max_index = spectral_max_index(mag_info->upper_bins,
> - SPECTRAL_HT20_40_NUM_BINS);
> + upper_max_index = spectral_max_index(mag_info->upper_bins);
>
> max_exp = mag_info->max_exp & 0xf;
>
> @@ -169,8 +167,8 @@ ath_cmn_process_ht20_fft(struct ath_rx_status *rs,
> magnitude = spectral_max_magnitude(mag_info->all_bins);
> fft_sample_20.max_magnitude = __cpu_to_be16(magnitude);
>
> - max_index = spectral_max_index(mag_info->all_bins,
> - SPECTRAL_HT20_NUM_BINS);
> + /* in ht20, this is a 6-bit signed number => shift it to 0 */
> + max_index = (spectral_max_index(mag_info->all_bins) ^ 0x20) - 4;
> fft_sample_20.max_index = max_index;
>
> bitmap_w = spectral_bitmap_weight(mag_info->all_bins);
> @@ -302,12 +300,10 @@ ath_cmn_process_ht20_40_fft(struct ath_rx_status *rs,
> upper_mag = spectral_max_magnitude(mag_info->upper_bins);
> fft_sample_40.upper_max_magnitude = __cpu_to_be16(upper_mag);
>
> - lower_max_index = spectral_max_index(mag_info->lower_bins,
> - SPECTRAL_HT20_40_NUM_BINS);
> + lower_max_index = spectral_max_index(mag_info->lower_bins);
> fft_sample_40.lower_max_index = lower_max_index;
>
> - upper_max_index = spectral_max_index(mag_info->upper_bins,
> - SPECTRAL_HT20_40_NUM_BINS);
> + upper_max_index = spectral_max_index(mag_info->upper_bins);
> fft_sample_40.upper_max_index = upper_max_index;
>
> lower_bitmap_w = spectral_bitmap_weight(mag_info->lower_bins);
> diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.h b/drivers/net/wireless/ath/ath9k/common-spectral.h
> index 998743b..7540835 100644
> --- a/drivers/net/wireless/ath/ath9k/common-spectral.h
> +++ b/drivers/net/wireless/ath/ath9k/common-spectral.h
> @@ -116,33 +116,17 @@ static inline u16 spectral_max_magnitude(u8 *bins)
> (bins[2] & 0x03) << 10;
> }
>
> -/* return the max magnitude from the all/upper/lower bins */
> -static inline u8 spectral_max_index(u8 *bins, int num_bins)
> +/* return the max index from the all/upper/lower bins
> + *
> + * in HT20: 6-bit signed number of range -28 to +27
> + * in HT40: 6-bit unsigned number of range 0 to +63
> + * (upper sub-channel index 0 is DC)
> + *
> + * Correct interpretation of the value has to be done at caller
> + */
> +static inline u8 spectral_max_index(u8 *bins)
> {
> - s8 m = (bins[2] & 0xfc) >> 2;
> - u8 zero_idx = num_bins / 2;
> -
> - /* It's a 5 bit signed int, remove its sign and use one's
> - * complement interpretation to add the sign back to the 8
> - * bit int
> - */
> - if (m & 0x20) {
> - m &= ~0x20;
> - m |= 0xe0;
> - }
> -
> - /* Bring the zero point to the beginning
> - * instead of the middle so that we can use
> - * it for array lookup and that we don't deal
> - * with negative values later
> - */
> - m += zero_idx;
> -
> - /* Sanity check to make sure index is within bounds */
> - if (m < 0 || m > num_bins - 1)
> - m = 0;
> -
> - return m;
> + return (bins[2] & 0xfc) >> 2;
> }
>
> /* return the bitmap weight from the all/upper/lower bins */
>
next prev parent reply other threads:[~2015-06-18 15:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-18 11:17 [ath9k-devel] [PATCH v2] ath9k: spectral - simplify max_index calculation Zefir Kurtisi
2015-06-18 11:17 ` Zefir Kurtisi
2015-06-18 15:16 ` Zefir Kurtisi [this message]
2015-06-18 15:16 ` Zefir Kurtisi
2015-07-20 15:48 ` [ath9k-devel] " Kalle Valo
2015-07-20 15:48 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5582E0CF.1050804@neratec.com \
--to=zefir.kurtisi@neratec.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.