From: Loic Dachary <loic@dachary.org>
To: Jason Dillaman <dillaman@redhat.com>
Cc: Ceph Development <ceph-devel@vger.kernel.org>
Subject: make check run time
Date: Fri, 19 Jun 2015 09:39:49 +0200 [thread overview]
Message-ID: <5583C745.4050901@dachary.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 4938 bytes --]
Hi,
Below is the sorted list of the longest running tests (measured by comparing the .log creation and modification times after a successfully run), in seconds. Note that when tests run in parallel, the longest running test caps the total run time: make check can't run under 1205 seconds == 20 minutes because of ./src/test/run-rbd-valgrind-unit-tests.sh. I reality, since the parallel run is not perfect, it takes about 30 minutes because src/test/run-rbd-valgrind-unit-tests.sh is not the first to run.
I'll take a look at src/test/osd/osd-scrub-repair.sh: I'm sure it can run within 2 minutes instead of 8 and still provide the same coverage. It would be great if you could do the same with the rbd tests. Running them as part of make check has been beneficial as it revealed rare conditions because they have been run many times a day, more often than teuthology tests. Hopefully there is a way to run them faster without sacrificing coverage ?
Cheers
1205 ./src/test/run-rbd-valgrind-unit-tests.sh.log
1174 ./src/test/run-rbd-unit-tests.sh.log
501 ./src/test/osd/osd-scrub-repair.sh.log
370 ./src/unittest_erasure_code_shec_all.log
297 ./src/test/cephtool-test-mon.sh.log
247 ./src/test/test-ceph-helpers.sh.log
162 ./qa/workunits/erasure-code/encode-decode-non-regression.sh.log
145 ./src/test/ceph_objectstore_tool.py.log
121 ./src/test/erasure-code/test-erasure-eio.sh.log
80 ./src/test/erasure-code/test-erasure-code.sh.log
78 ./src/test/cephtool-test-mds.sh.log
61 ./src/unittest_erasure_code_shec_thread.log
52 ./src/test/mon/osd-pool-create.sh.log
49 ./src/test/osd/osd-bench.sh.log
40 ./src/test/encoding/readable.sh.log
38 ./src/unittest_crush.log
33 ./src/test/mon/osd-erasure-code-profile.sh.log
32 ./src/test/pybind/test_ceph_argparse.py.log
29 ./src/test/mon/osd-crush.sh.log
20 ./src/ceph-detect-init/run-tox.sh.log
19 ./src/test/mon/misc.sh.log
17 ./src/test/encoding/check-generated.sh.log
15 ./src/test/osd/osd-config.sh.log
12 ./src/unittest_crc32c.log
12 ./src/test/osd/osd-copy-from.sh.log
12 ./src/test/cephtool-test-osd.sh.log
7 ./src/unittest_workqueue.log
7 ./src/unittest_bloom_filter.log
6 ./src/test/mon/mon-handle-forward.sh.log
5 ./src/unittest_erasure_code_shec.log
5 ./src/unittest_admin_socket.log
4 ./src/unittest_crypto.log
4 ./src/test/mon/mkfs.sh.log
2 ./src/unittest_signals.log
2 ./src/unittest_heartbeatmap.log
2 ./src/unittest_erasure_code_isa.log
2 ./src/unittest_bufferlist.sh.log
2 ./src/unittest_bufferlist.log
1 ./src/unittest_throttle.log
1 ./src/unittest_osdmap.log
1 ./src/unittest_osd_osdcap.log
0 ./src/unittest_xlist.log
0 ./src/unittest_util.log
0 ./src/unittest_utf8.log
0 ./src/unittest_texttable.log
0 ./src/unittest_tableformatter.log
0 ./src/unittest_strtol.log
0 ./src/unittest_striper.log
0 ./src/unittest_str_map.log
0 ./src/unittest_str_list.log
0 ./src/unittest_sloppy_crc_map.log
0 ./src/unittest_simple_spin.log
0 ./src/unittest_sharedptr_registry.log
0 ./src/unittest_shared_cache.log
0 ./src/unittest_safe_io.log
0 ./src/unittest_run_cmd.log
0 ./src/unittest_readahead.log
0 ./src/unittest_rbd_replay.log
0 ./src/unittest_prioritized_queue.log
0 ./src/unittest_prebufferedstreambuf.log
0 ./src/unittest_pglog.log
0 ./src/unittest_perf_counters.log
0 ./src/unittest_osdscrub.log
0 ./src/unittest_osd_types.log
0 ./src/unittest_on_exit.log
0 ./src/unittest_mon_pgmap.log
0 ./src/unittest_mon_moncap.log
0 ./src/unittest_mime.log
0 ./src/unittest_mds_types.log
0 ./src/unittest_mds_authcap.log
0 ./src/unittest_lru.log
0 ./src/unittest_log.log
0 ./src/unittest_librados_config.log
0 ./src/unittest_librados.log
0 ./src/unittest_libcephfs_config.log
0 ./src/unittest_lfnindex.log
0 ./src/unittest_ipaddr.log
0 ./src/unittest_io_priority.log
0 ./src/unittest_hitset.log
0 ./src/unittest_gather.log
0 ./src/unittest_formatter.log
0 ./src/unittest_flatindex.log
0 ./src/unittest_escape.log
0 ./src/unittest_erasure_code_plugin_lrc.log
0 ./src/unittest_erasure_code_plugin_jerasure.log
0 ./src/unittest_erasure_code_plugin_isa.log
0 ./src/unittest_erasure_code_plugin.log
0 ./src/unittest_erasure_code_lrc.log
0 ./src/unittest_erasure_code_jerasure.log
0 ./src/unittest_erasure_code_example.log
0 ./src/unittest_erasure_code.log
0 ./src/unittest_encoding.log
0 ./src/unittest_ecbackend.log
0 ./src/unittest_daemon_config.log
0 ./src/unittest_crypto_init.log
0 ./src/unittest_crush_wrapper.log
0 ./src/unittest_context.log
0 ./src/unittest_confutils.log
0 ./src/unittest_config.log
0 ./src/unittest_chain_xattr.log
0 ./src/unittest_ceph_crypto.log
0 ./src/unittest_ceph_compatset.log
0 ./src/unittest_ceph_argparse.log
0 ./src/unittest_blkdev.log
0 ./src/unittest_bit_vector.log
0 ./src/unittest_base64.log
0 ./src/unittest_arch.log
0 ./src/unittest_addrs.log
0 ./src/test/pybind/test_ceph_daemon.py.log
--
Loïc Dachary, Artisan Logiciel Libre
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next reply other threads:[~2015-06-19 7:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-19 7:39 Loic Dachary [this message]
2015-06-19 11:34 ` make check run time Jason Dillaman
[not found] ` <CB7ACD0B-360E-414B-8CDA-C839431891DD@redhat.com>
2015-06-19 14:09 ` Loic Dachary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5583C745.4050901@dachary.org \
--to=loic@dachary.org \
--cc=ceph-devel@vger.kernel.org \
--cc=dillaman@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.