From: poma <pomidorabelisima@gmail.com>
To: For testing and quality assurance of Fedora releases
<test@lists.fedoraproject.org>
Cc: linux-media <linux-media@vger.kernel.org>,
Development discussions related to Fedora
<devel@lists.fedoraproject.org>,
Kevin Thayer <nufan_wfk@yahoo.com>, Chris Kennedy <c@groovy.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
Ben Hutchings <ben@decadent.org.uk>,
Josh Boyer <jwboyer@redhat.com>,
Richard Vollkommer <linux@hauppauge.com>,
Fred Richter <frichter@hauppauge.com>,
Hauppauge Tech Support <support@hauppauge.com>
Subject: ivtv - firmware - v4l-cx2341x*.fw - Upstream & Fedora
Date: Sun, 21 Jun 2015 23:47:42 +0200 [thread overview]
Message-ID: <558730FE.1030700@gmail.com> (raw)
Háu kola
$ lspci -d 4444:0016 -knn
01:08.0 Multimedia video controller [0400]: Internext Compression Inc iTVC16 (CX23416) Video Decoder [4444:0016] (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 150 [0070:8801]
Kernel driver in use: ivtv
Kernel modules: ivtv
~~~~~~~~~~~~~~~~~~~~
$ dmesg | grep ivtv
[ 10.082881] ivtv: Start initialization, version 1.4.3
[ 10.085644] ivtv0: Initializing card 0
[ 10.088287] ivtv0: Autodetected Hauppauge card (cx23416 based)
[ 10.094502] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 10.183374] ivtv0: Autodetected Hauppauge WinTV PVR-150
[ 10.240409] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[ 10.380617] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 10.431991] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 10.432151] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 10.432256] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 10.432358] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 10.432459] ivtv0: Registered device radio0 for encoder radio
[ 10.432473] ivtv0: Initialized card: Hauppauge WinTV PVR-150
[ 10.433869] ivtv: End initialization
[ 11.820105] ivtv 0000:01:08.0: Direct firmware load for v4l-cx2341x-enc.fw failed with error -2
[ 11.820119] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
[ 11.820124] ivtv0: Did you put the firmware in the hotplug firmware directory?
[ 11.820129] ivtv0: Retry loading firmware
[ 12.439735] ivtv 0000:01:08.0: Direct firmware load for v4l-cx2341x-enc.fw failed with error -2
[ 12.439747] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
[ 12.439752] ivtv0: Did you put the firmware in the hotplug firmware directory?
[ 12.439757] ivtv0: Failed to initialize on device video32
[ 12.439788] ivtv0: Failed to initialize on device video0
[ 12.439953] ivtv0: Failed to initialize on device vbi0
[ 12.439968] ivtv0: Failed to initialize on device video24
[ 12.440110] ivtv0: Failed to initialize on device radio0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$ modinfo ivtv | grep 'author\|firmware'
author: Kevin Thayer, Chris Kennedy, Hans Verkuil
firmware: v4l-cx2341x-init.mpg
firmware: v4l-cx2341x-dec.fw
firmware: v4l-cx2341x-enc.fw
~~~~~~~~~~~~~~~~~~~~~~~~
$ rpm -qi linux-firmware
...
Packager : Fedora Project
Vendor : Fedora Project
...
Summary : Firmware files used by the Linux kernel
Description :
This package includes firmware files required for some devices to
operate.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$ rpm -ql linux-firmware | grep v4l-cx2341x
$
~~~~~~~~~~~~~~~~~~~~~~~~~~~
# yum install ivtv-firmware
...
No package ivtv-firmware available.
Error: Nothing to do
~~~~~~~~~~~~~~~~~~~~
$ rpm -qilp https://kojipkgs.fedoraproject.org/packages/ivtv-firmware/20080701/26/noarch/ivtv-firmware-20080701-26.noarch.rpm
Name : ivtv-firmware
Epoch : 2
Version : 20080701
Release : 26
Architecture: noarch
Install Date: (not installed)
Group : System Environment/Kernel
Size : 857256
License : Redistributable, no modification permitted
Signature : (none)
Source RPM : ivtv-firmware-20080701-26.src.rpm
Build Date : Sun 08 Jun 2014 05:38:45 AM CEST
Build Host : buildvm-11.phx2.fedoraproject.org
Relocations : (not relocatable)
Packager : Fedora Project
Vendor : Fedora Project
URL : http://dl.ivtvdriver.org/ivtv/firmware/
Summary : Firmware for the Hauppauge PVR 250/350/150/500/USB2 model series
Description :
This package contains the firmware for WinTV Hauppauge PVR
250/350/150/500/USB2 cards.
/lib/firmware/ivtv-firmware-license-end-user.txt
/lib/firmware/ivtv-firmware-license-oemihvisv.txt
/lib/firmware/v4l-cx2341x-dec.fw
/lib/firmware/v4l-cx2341x-enc.fw
/lib/firmware/v4l-cx2341x-init.mpg
/lib/firmware/v4l-cx25840.fw
/lib/firmware/v4l-pvrusb2-24xxx-01.fw
/lib/firmware/v4l-pvrusb2-29xxx-01.fw
/usr/share/doc/ivtv-firmware
/usr/share/doc/ivtv-firmware/license-end-user.txt
/usr/share/doc/ivtv-firmware/license-oemihvisv.txt
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Why these firmwares are not included upstream
http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/
?
Why these firmwares are obsoleted(?) downstream
http://pkgs.fedoraproject.org/cgit/ivtv-firmware.git
?
Why these firmware are not included downstream
http://pkgs.fedoraproject.org/cgit/linux-firmware.git
?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
next reply other threads:[~2015-06-21 21:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-21 21:47 poma [this message]
2015-06-22 12:13 ` ivtv - firmware - v4l-cx2341x*.fw - Upstream & Fedora Mauro Carvalho Chehab
2015-06-22 12:20 ` Mauro Carvalho Chehab
2015-06-22 15:44 ` poma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=558730FE.1030700@gmail.com \
--to=pomidorabelisima@gmail.com \
--cc=ben@decadent.org.uk \
--cc=c@groovy.org \
--cc=devel@lists.fedoraproject.org \
--cc=frichter@hauppauge.com \
--cc=hans.verkuil@cisco.com \
--cc=jwboyer@redhat.com \
--cc=linux-media@vger.kernel.org \
--cc=linux@hauppauge.com \
--cc=mchehab@osg.samsung.com \
--cc=nufan_wfk@yahoo.com \
--cc=support@hauppauge.com \
--cc=test@lists.fedoraproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.