diff for duplicates of <5589B78C.4080600@redhat.com> diff --git a/a/1.txt b/N1/1.txt index be6e4c7..a7af871 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,11 +1,11 @@ Hi, -On 06/23/2015 05:06 PM, m.silentcreek@gmail.com wrote: +On 06/23/2015 05:06 PM, m.silentcreek at gmail.com wrote: > Hi Hans, > > is it possible that this patch (and the parent commit "Input: sun4i-ts - allow controlling filter and sensitivity via DT") has quite an adversial effect on other boards than the ones tested? > -> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15°C to -10°C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40°C. While that might not have been accurate either, it was at least plausible. +> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15?C to -10?C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40?C. While that might not have been accurate either, it was at least plausible. The temperature curve for the A20 SoC was not changed, if it did change then you're using an old dtb file with a new kernel, you must always update your @@ -21,7 +21,7 @@ dtb file together with the kernel. > Timo > > -> Am Montag, 9. März 2015 10:38:02 UTC+1 schrieb Hans de Goede: +> Am Montag, 9. M?rz 2015 10:38:02 UTC+1 schrieb Hans de Goede: >> The commit titled: >> "touchscreen: sun4i-ts: A10 (sun4i) has a different temperature curve" >> contains a math error, the offset it uses is in degrees, but the actual code @@ -102,7 +102,3 @@ dtb file together with the kernel. Regards, Hans --- -To unsubscribe from this list: send the line "unsubscribe linux-input" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 3fa4c77..6948bca 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,26 +1,19 @@ "ref\01425893870-28715-1-git-send-email-hdegoede@redhat.com\0" "ref\041a7a857-96fd-48ab-9778-127cfc091ef0@googlegroups.com\0" - "From\0Hans de Goede <hdegoede@redhat.com>\0" - "Subject\0Re: [PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting\0" + "From\0hdegoede@redhat.com (Hans de Goede)\0" + "Subject\0[PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting\0" "Date\0Tue, 23 Jun 2015 21:46:20 +0200\0" - "To\0m.silentcreek@gmail.com" - " linux-sunxi@googlegroups.com\0" - "Cc\0linux-input@vger.kernel.org" - dmitry.torokhov@gmail.com - devicetree@vger.kernel.org - linux-arm-kernel@lists.infradead.org - wens@csie.org - " maxime.ripard@free-electrons.com\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Hi,\n" "\n" - "On 06/23/2015 05:06 PM, m.silentcreek@gmail.com wrote:\n" + "On 06/23/2015 05:06 PM, m.silentcreek at gmail.com wrote:\n" "> Hi Hans,\n" ">\n" "> is it possible that this patch (and the parent commit \"Input: sun4i-ts - allow controlling filter and sensitivity via DT\") has quite an adversial effect on other boards than the ones tested?\n" ">\n" - "> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15\302\260C to -10\302\260C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40\302\260C. While that might not have been accurate either, it was at least plausible.\n" + "> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15?C to -10?C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40?C. While that might not have been accurate either, it was at least plausible.\n" "\n" "The temperature curve for the A20 SoC was not changed, if it did change then\n" "you're using an old dtb file with a new kernel, you must always update your\n" @@ -36,7 +29,7 @@ "> Timo\n" ">\n" ">\n" - "> Am Montag, 9. M\303\244rz 2015 10:38:02 UTC+1 schrieb Hans de Goede:\n" + "> Am Montag, 9. M?rz 2015 10:38:02 UTC+1 schrieb Hans de Goede:\n" ">> The commit titled:\n" ">> \"touchscreen: sun4i-ts: A10 (sun4i) has a different temperature curve\"\n" ">> contains a math error, the offset it uses is in degrees, but the actual code\n" @@ -116,10 +109,6 @@ "\n" "Regards,\n" "\n" - "Hans\n" - "--\n" - "To unsubscribe from this list: send the line \"unsubscribe linux-input\" in\n" - "the body of a message to majordomo@vger.kernel.org\n" - More majordomo info at http://vger.kernel.org/majordomo-info.html + Hans -048c2639d0337afeb22a1c1850e5b3c9e827e0008c3d4a64f449c358936f04db +e0c34533bac1e7ad7e0d8e1f9d0f2ff8e21e0dde0c61a2a8d8b4f76b2b1eebb9
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.