diff for duplicates of <558A5966.9010908@redhat.com> diff --git a/a/1.txt b/N1/1.txt index 44dfacb..5ac47cf 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -4,12 +4,12 @@ On 23-06-15 21:54, Dmitry Torokhov wrote: > On Tue, Jun 23, 2015 at 09:46:20PM +0200, Hans de Goede wrote: >> Hi, >> ->> On 06/23/2015 05:06 PM, m.silentcreek-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote: +>> On 06/23/2015 05:06 PM, m.silentcreek at gmail.com wrote: >>> Hi Hans, >>> >>> is it possible that this patch (and the parent commit "Input: sun4i-ts - allow controlling filter and sensitivity via DT") has quite an adversial effect on other boards than the ones tested? >>> ->>> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15°C to -10°C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40°C. While that might not have been accurate either, it was at least plausible. +>>> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15?C to -10?C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40?C. While that might not have been accurate either, it was at least plausible. >> >> The temperature curve for the A20 SoC was not changed, if it did change then >> you're using an old dtb file with a new kernel, you must always update your @@ -37,11 +37,11 @@ no other way to deal with this. Let me also reply to one of Timo's later mails here, as that explains the real problem: -On 23-06-15 23:06, m.silentcreek-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:> Hi again, +On 23-06-15 23:06, m.silentcreek at gmail.com wrote:> Hi again, > > Am Dienstag, 23. Juni 2015 21:46:25 UTC+2 schrieb Hans de Goede: <snip> - >>> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15°C to -10°C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40°C. While that might not have been accurate either, it was at least plausible. + >>> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15?C to -10?C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40?C. While that might not have been accurate either, it was at least plausible. >> >> The temperature curve for the A20 SoC was not changed, if it did change then >> you're using an old dtb file with a new kernel, you must always update your @@ -66,8 +66,3 @@ do you agree ? Regards, Hans - --- -You received this message because you are subscribed to the Google Groups "linux-sunxi" group. -To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org -For more options, visit https://groups.google.com/d/optout. diff --git a/a/content_digest b/N1/content_digest index d909fd4..1ce4780 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -2,17 +2,10 @@ "ref\041a7a857-96fd-48ab-9778-127cfc091ef0@googlegroups.com\0" "ref\05589B78C.4080600@redhat.com\0" "ref\020150623195424.GE40168@dtor-ws\0" - "From\0Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\0" - "Subject\0Re: [PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting\0" + "From\0hdegoede@redhat.com (Hans de Goede)\0" + "Subject\0[PATCH] touchscreen: sun4i-ts: Really fix A10 temperature reporting\0" "Date\0Wed, 24 Jun 2015 09:16:54 +0200\0" - "To\0Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" - "Cc\0m.silentcreek-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org" - linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org - linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org - wens-jdAy2FN1RRM@public.gmane.org - " maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Hi,\n" @@ -21,12 +14,12 @@ "> On Tue, Jun 23, 2015 at 09:46:20PM +0200, Hans de Goede wrote:\n" ">> Hi,\n" ">>\n" - ">> On 06/23/2015 05:06 PM, m.silentcreek-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:\n" + ">> On 06/23/2015 05:06 PM, m.silentcreek at gmail.com wrote:\n" ">>> Hi Hans,\n" ">>>\n" ">>> is it possible that this patch (and the parent commit \"Input: sun4i-ts - allow controlling filter and sensitivity via DT\") has quite an adversial effect on other boards than the ones tested?\n" ">>>\n" - ">>> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15\302\260C to -10\302\260C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40\302\260C. While that might not have been accurate either, it was at least plausible.\n" + ">>> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15?C to -10?C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40?C. While that might not have been accurate either, it was at least plausible.\n" ">>\n" ">> The temperature curve for the A20 SoC was not changed, if it did change then\n" ">> you're using an old dtb file with a new kernel, you must always update your\n" @@ -54,11 +47,11 @@ "Let me also reply to one of Timo's later mails here, as that explains\n" "the real problem:\n" "\n" - "On 23-06-15 23:06, m.silentcreek-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:> Hi again,\n" + "On 23-06-15 23:06, m.silentcreek at gmail.com wrote:> Hi again,\n" " >\n" " > Am Dienstag, 23. Juni 2015 21:46:25 UTC+2 schrieb Hans de Goede:\n" "<snip>\n" - " >>> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15\302\260C to -10\302\260C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40\302\260C. While that might not have been accurate either, it was at least plausible.\n" + " >>> On my Lemaker Bananapi the temperature is now being reported as somwhere between -15?C to -10?C with the latest Kernel 4.1.0. These negative values are obviously way off. On Kernel 4.0.5 the temperature reading was usually around 40?C. While that might not have been accurate either, it was at least plausible.\n" " >>\n" " >> The temperature curve for the A20 SoC was not changed, if it did change then\n" " >> you're using an old dtb file with a new kernel, you must always update your\n" @@ -82,11 +75,6 @@ "\n" "Regards,\n" "\n" - "Hans\n" - "\n" - "-- \n" - "You received this message because you are subscribed to the Google Groups \"linux-sunxi\" group.\n" - "To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\n" - For more options, visit https://groups.google.com/d/optout. + Hans -128d868d61d5b758ff50bf14a3c35ca27a1fd7ba9270a748dc2add1f5ce79b06 +e16e652d1ffc047f4b851cc77ae3417d0fba98b89afd600640f19b685a096b7a
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.