From: Boszormenyi Zoltan <zboszor@pr.hu>
To: Jiang Liu <jiang.liu@linux.intel.com>,
"Rafael J . Wysocki" <rjw@rjwysocki.net>,
Bjorn Helgaas <bhelgaas@google.com>,
Ingo Molnar <mingo@kernel.org>, Len Brown <lenb@kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org,
"x86 @ kernel . org" <x86@kernel.org>
Subject: Re: [Bugfix v2] PCI, ACPI: Fix regressions caused by resource_size_t overflow with 32bit kernel
Date: Wed, 24 Jun 2015 10:25:46 +0200 [thread overview]
Message-ID: <558A698A.9000508@pr.hu> (raw)
In-Reply-To: <1435131817-28167-1-git-send-email-jiang.liu@linux.intel.com>
2015-06-24 09:43 keltezéssel, Jiang Liu írta:
> Since commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource
> interfaces to simplify implementation"), x86 PCI ACPI host bridge driver
> validates ACPI resources by first converting an ACPI resource to
> a 'struct resource' structure and then applying checks against the
> converted resource structure. The 'start' and 'end' fields in 'struct
> resource' are defined to be type of resource_size_t, which may be 32 bits
> or 64 bits depending on CONFIG_PHYS_ADDR_T_64BIT.
>
> This may cause incorrect resource validation results with 32 bit kernels
> because 64bit ACPI resource descriptors may get truncated when converting
> to 32bit 'start' and 'end' fields in 'struct resource'. And eventually
> affects PCI resource allocation subsystem and causes some PCI devices
> unusable.
>
> So enhance the ACPI resource parsing interfaces to ignore ACPI resource
> descriptors with address/offset observe 4G when running in 32bit mode.
> This reverts to the behavior before commit 593669c2ac0f.
>
> This issue was triggered on a platform running 32bit kernel with an
> ACPI resource descriptor with address range [0x400000000-0xfffffffff].
> Please refer to https://lkml.org/lkml/2015/6/19/277 for more information.
>
> Reported-by: Boszormenyi Zoltan <zboszor@pr.hu>
> Fixes: 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation")
> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
> Cc: stable@vger.kernel.org # 4.0
> ---
>
> Hi Zoltan,
> Could you please help to test this patch against the latest kernel?
> Thanks!
> Gerry
I will, thanks.
Best regards,
Zoltán
>
> ---
> drivers/acpi/resource.c | 24 +++++++++++++++---------
> 1 file changed, 15 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
> index 8244f013f210..f1c966e05078 100644
> --- a/drivers/acpi/resource.c
> +++ b/drivers/acpi/resource.c
> @@ -193,6 +193,7 @@ static bool acpi_decode_space(struct resource_win *win,
> u8 iodec = attr->granularity == 0xfff ? ACPI_DECODE_10 : ACPI_DECODE_16;
> bool wp = addr->info.mem.write_protect;
> u64 len = attr->address_length;
> + u64 start, end, offset = 0;
> struct resource *res = &win->res;
>
> /*
> @@ -204,9 +205,6 @@ static bool acpi_decode_space(struct resource_win *win,
> pr_debug("ACPI: Invalid address space min_addr_fix %d, max_addr_fix %d, len %llx\n",
> addr->min_address_fixed, addr->max_address_fixed, len);
>
> - res->start = attr->minimum;
> - res->end = attr->maximum;
> -
> /*
> * For bridges that translate addresses across the bridge,
> * translation_offset is the offset that must be added to the
> @@ -214,12 +212,22 @@ static bool acpi_decode_space(struct resource_win *win,
> * primary side. Non-bridge devices must list 0 for all Address
> * Translation offset bits.
> */
> - if (addr->producer_consumer == ACPI_PRODUCER) {
> - res->start += attr->translation_offset;
> - res->end += attr->translation_offset;
> - } else if (attr->translation_offset) {
> + if (addr->producer_consumer == ACPI_PRODUCER)
> + offset = attr->translation_offset;
> + else if (attr->translation_offset)
> pr_debug("ACPI: translation_offset(%lld) is invalid for non-bridge device.\n",
> attr->translation_offset);
> + start = attr->minimum + offset;
> + end = attr->maximum + offset;
> +
> + win->offset = offset;
> + res->start = start;
> + res->end = end;
> + if (sizeof(resource_size_t) < sizeof(u64) &&
> + (offset != win->offset || start != res->start || end != res->end)) {
> + pr_warn("acpi resource window ([%#llx-%#llx] ignored, not CPU addressable)\n",
> + attr->minimum, attr->maximum);
> + return false;
> }
>
> switch (addr->resource_type) {
> @@ -236,8 +244,6 @@ static bool acpi_decode_space(struct resource_win *win,
> return false;
> }
>
> - win->offset = attr->translation_offset;
> -
> if (addr->producer_consumer == ACPI_PRODUCER)
> res->flags |= IORESOURCE_WINDOW;
>
next prev parent reply other threads:[~2015-06-24 8:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-24 7:43 [Bugfix v2] PCI, ACPI: Fix regressions caused by resource_size_t overflow with 32bit kernel Jiang Liu
2015-06-24 8:25 ` Boszormenyi Zoltan [this message]
2015-06-24 11:00 ` Boszormenyi Zoltan
2015-06-24 8:30 ` Ingo Molnar
2015-06-24 9:28 ` Boszormenyi Zoltan
2015-06-24 9:28 ` Boszormenyi Zoltan
2015-06-24 9:49 ` Ingo Molnar
2015-06-24 10:17 ` [Bugfix v3] PCI, ACPI: Fix regressions caused by resource_size_t overflow with 32-bit kernel Jiang Liu
2015-06-24 10:18 ` Ingo Molnar
2015-06-29 8:55 ` Boszormenyi Zoltan
2015-06-29 14:28 ` Jiang Liu
2015-06-29 14:28 ` Jiang Liu
2015-07-08 7:26 ` [Bugfix v4] " Jiang Liu
2015-07-10 1:10 ` Rafael J. Wysocki
2015-11-02 15:27 ` Tomasz Nowicki
2015-11-05 12:53 ` Tomasz Nowicki
2015-11-05 13:24 ` Jiang Liu
2015-11-05 13:53 ` Tomasz Nowicki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=558A698A.9000508@pr.hu \
--to=zboszor@pr.hu \
--cc=bhelgaas@google.com \
--cc=jiang.liu@linux.intel.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=rjw@rjwysocki.net \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.