From: Paolo Bonzini <pbonzini@redhat.com>
To: Eric Auger <eric.auger@linaro.org>,
eric.auger@st.com, qemu-devel@nongnu.org,
peter.maydell@linaro.org, peter.crosthwaite@xilinx.com,
alex.williamson@redhat.com
Cc: b.reynal@virtualopensystems.com, christoffer.dall@linaro.org,
vikrams@codeaurora.org, patches@linaro.org
Subject: Re: [Qemu-devel] [RESEND PATCH v16 3/6] kvm-all.c: add qemu_irq/gsi hash table and utility routines
Date: Wed, 24 Jun 2015 11:53:53 +0200 [thread overview]
Message-ID: <558A7E31.8010303@redhat.com> (raw)
In-Reply-To: <1434386038-9246-4-git-send-email-eric.auger@linaro.org>
On 15/06/2015 18:33, Eric Auger wrote:
> VFIO platform device needs to setup irqfd but it does not know the
> gsi corresponding to the device qemu_irq. This series proposes to
> store a hash table in kvm_state using the qemu_irq as key and the gsi
> as a value.
>
> kvm_irqchip_set_qemuirq_gsi allows to insert such a pair. The interrupt
> controller is supposed to use it.
>
> kvm_irqchip_[add, remove]_irqfd_notifier allows to setup/tear down
> irqfd directly from the qemu_irq.
>
> Signed-off-by: Eric Auger <eric.auger@linaro.org>
> Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
>
> v15 -> v16:
> - Added Vikram's T-b
>
> v13 -> v14:
> - correct checkpatch warning
>
> v2 -> v3 (integration into VFIO series v13):
> - rename kvm_irqchip_[add, remove]_qemuirq_irqfd_notifier into
> kvm_irqchip_[add, remove]_irqfd_notifier. Possible since legacy
> functions were also renamed with _gsi suffix.
>
> V1 -> v2:
> - qemu_irq get_gsi callback replaced by hash table stored in kvm
> ---
> include/sysemu/kvm.h | 6 ++++++
> kvm-all.c | 37 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 43 insertions(+)
>
> diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
> index acb3025..ba612fc 100644
> --- a/include/sysemu/kvm.h
> +++ b/include/sysemu/kvm.h
> @@ -19,6 +19,7 @@
> #include "qemu/queue.h"
> #include "qom/cpu.h"
> #include "exec/memattrs.h"
> +#include "hw/irq.h"
>
> #ifdef CONFIG_KVM
> #include <linux/kvm.h>
> @@ -420,6 +421,11 @@ int kvm_irqchip_add_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
> EventNotifier *rn, int virq);
> int kvm_irqchip_remove_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
> int virq);
> +int kvm_irqchip_add_irqfd_notifier(KVMState *s, EventNotifier *n,
> + EventNotifier *rn, qemu_irq irq);
> +int kvm_irqchip_remove_irqfd_notifier(KVMState *s, EventNotifier *n,
> + qemu_irq irq);
> +void kvm_irqchip_set_qemuirq_gsi(KVMState *s, qemu_irq irq, int gsi);
> void kvm_pc_gsi_handler(void *opaque, int n, int level);
> void kvm_pc_setup_irq_routing(bool pci_enabled);
> void kvm_init_irq_routing(KVMState *s);
> diff --git a/kvm-all.c b/kvm-all.c
> index 730b818..939bfc4 100644
> --- a/kvm-all.c
> +++ b/kvm-all.c
> @@ -37,6 +37,7 @@
> #include "exec/address-spaces.h"
> #include "qemu/event_notifier.h"
> #include "trace.h"
> +#include "hw/irq.h"
>
> #include "hw/boards.h"
>
> @@ -98,6 +99,7 @@ struct KVMState
> * unsigned, and treating them as signed here can break things */
> unsigned irq_set_ioctl;
> unsigned int sigmask_len;
> + GHashTable *gsimap;
> #ifdef KVM_CAP_IRQ_ROUTING
> struct kvm_irq_routing *irq_routes;
> int nr_allocated_irq_routes;
> @@ -1339,6 +1341,39 @@ int kvm_irqchip_remove_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
> false);
> }
>
> +int kvm_irqchip_add_irqfd_notifier(KVMState *s, EventNotifier *n,
> + EventNotifier *rn, qemu_irq irq)
> +{
> + gpointer key, gsi;
> + gboolean found = g_hash_table_lookup_extended(s->gsimap, irq, &key, &gsi);
> +
> + if (!found) {
> + return -ENXIO;
> + } else {
> + return kvm_irqchip_add_irqfd_notifier_gsi(s, n, rn,
> + GPOINTER_TO_UINT(gsi));
> + }
> +}
> +
> +int kvm_irqchip_remove_irqfd_notifier(KVMState *s, EventNotifier *n,
> + qemu_irq irq)
> +{
> + gpointer key, gsi;
> + gboolean found = g_hash_table_lookup_extended(s->gsimap, irq, &key, &gsi);
> +
> + if (!found) {
> + return -ENXIO;
> + } else {
> + return kvm_irqchip_remove_irqfd_notifier_gsi(s, n,
> + GPOINTER_TO_INT(gsi));
> + }
> +}
> +
> +void kvm_irqchip_set_qemuirq_gsi(KVMState *s, qemu_irq irq, int gsi)
> +{
> + g_hash_table_insert(s->gsimap, irq, GINT_TO_POINTER(gsi));
> +}
> +
> static int kvm_irqchip_create(MachineState *machine, KVMState *s)
> {
> int ret;
> @@ -1371,6 +1406,8 @@ static int kvm_irqchip_create(MachineState *machine, KVMState *s)
>
> kvm_init_irq_routing(s);
>
> + s->gsimap = g_hash_table_new(g_direct_hash, g_direct_equal);
> +
> return 0;
> }
>
>
next prev parent reply other threads:[~2015-06-24 9:54 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-15 16:33 [Qemu-devel] [RESEND PATCH v16 0/6] KVM platform device passthrough Eric Auger
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 1/6] hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation Eric Auger
2015-06-16 8:29 ` Peter Maydell
2015-06-16 8:44 ` Eric Auger
2015-06-16 8:57 ` Peter Maydell
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 2/6] kvm: rename kvm_irqchip_[add, remove]_irqfd_notifier with gsi suffix Eric Auger
2015-06-24 9:53 ` Paolo Bonzini
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 3/6] kvm-all.c: add qemu_irq/gsi hash table and utility routines Eric Auger
2015-06-24 9:53 ` Paolo Bonzini [this message]
2015-06-26 11:41 ` Peter Maydell
2015-06-26 11:56 ` Eric Auger
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 4/6] intc: arm_gic_kvm: set the qemu_irq/gsi mapping Eric Auger
2015-06-24 9:54 ` Paolo Bonzini
2015-06-26 11:43 ` Peter Maydell
2015-06-26 11:59 ` Eric Auger
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 5/6] sysbus: add irq_routing_notifier Eric Auger
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 6/6] hw/vfio/platform: add irqfd support Eric Auger
2015-06-26 11:57 ` Peter Maydell
2015-06-26 12:19 ` Eric Auger
2015-06-26 16:21 ` Alex Williamson
2015-06-26 16:26 ` Paolo Bonzini
2015-06-26 16:31 ` Eric Auger
2015-06-26 16:46 ` Alex Williamson
2015-06-22 7:56 ` [Qemu-devel] [RESEND PATCH v16 0/6] KVM platform device passthrough Eric Auger
2015-06-24 9:55 ` Paolo Bonzini
2015-06-24 9:59 ` Eric Auger
2015-06-24 10:10 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=558A7E31.8010303@redhat.com \
--to=pbonzini@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=b.reynal@virtualopensystems.com \
--cc=christoffer.dall@linaro.org \
--cc=eric.auger@linaro.org \
--cc=eric.auger@st.com \
--cc=patches@linaro.org \
--cc=peter.crosthwaite@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=vikrams@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.