From mboxrd@z Thu Jan 1 00:00:00 1970 Content-Type: multipart/mixed; boundary="===============7107484204050178733==" MIME-Version: 1.0 From: Marko Sulejic Subject: Re: HE910 + ofono: "Activating context failed with error: Unknown error type" Date: Thu, 25 Jun 2015 15:05:51 +0200 Message-ID: <558BFCAF.4070700@hale.at> In-Reply-To: <558BC6C8.9080600@hale.at> List-Id: To: ofono@ofono.org --===============7107484204050178733== Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Hi again, the problem seems to be in the atmodem/gprs-context.c : gprs_activate_primary function, where if (g_at_chat_send(gcd->chat, buf, none_prefix, at_cgdcont_cb, gc, NULL) > 0) is called after a reconnect, and then it fails. It seems to work if I call g_at_chat_send(gcd->chat, "AT&C0", none_prefix, NULL, NULL, NULL) prior. So this would mean that a disconnect or similar action sets DCD to low, and the chats are closed. Does oFono anywhere in the code sets DCD explicitely to low or is it = maybe a bug? My patch would look something like this (if it is an HE910 issue only): if (gcd->vendor =3D=3D OFONO_VENDOR_TELIT) { if(g_at_chat_send(gcd->chat, "AT&C0", none_prefix, NULL, NULL, NULL) <=3D 0) goto error; } Thanks, Marko Am 2015-06-25 um 11:15 schrieb Marko Sulejic: > Hi, > > I need your help in using a Telit HE910 with ofono (and eventually = > connman). > (I am using ofono 1.16 with HE910 firmware version 12.00.006; connman = > version is 1.29). > > My problem is the following ... > on startup everything works fine and the ppp0 connection is established, > but problems occur in the following case: > > connmanctl> disconnect cellular_*_context15 > Disconnected cellular_*_context15 > > connmanctl> connect cellular_*_context15 > Error /net/connman/service/cellular_*_context15: Input/output error > > > ofonod[5355]: gprs-context.c(244):at_gprs_activate_primary() cid 1 > ofonod[5355]: gprs.c(889):pri_activate_callback() 0x1a18c50 > ofonod[5355]: gprs.c(893):pri_activate_callback() Activating context = > failed with error: Unknown error type > connmand[3815]: Failed to change property: /he910_0/context15 = > org.ofono.ConnectionContext.Active: org.ofono.Error.Failed Operation = > failed > > > The same error happens if I am manually sending connect/disconnect via = > dbus-send. > > Only a hard ofono restart can establish the connection again. > This behavior happens all the time once a ppp0 disconnect happened > (e.g. by removing the SIM; manual disconnect via dbus or connmanctl). > > A subquestion regarding connman: > Can connmand be configured in such a way that on every connection > loss, ofono is triggered to reconnect to the Internet? > > Thank you very muchin advance, > Marko > _______________________________________________ > ofono mailing list > ofono(a)ofono.org > https://lists.ofono.org/mailman/listinfo/ofono --===============7107484204050178733==--