From: roopa <roopa@cumulusnetworks.com>
To: Stephen Hemminger <stephen@networkplumber.org>
Cc: netdev <netdev@vger.kernel.org>
Subject: Re: [ANNOUNCE] iproute2 4.1.0
Date: Fri, 26 Jun 2015 14:49:11 -0700 [thread overview]
Message-ID: <558DC8D7.4080803@cumulusnetworks.com> (raw)
In-Reply-To: <20150626130616.5a350099@urahara>
Hi Stephen,
I don't see the below fix in the 4.1 tarball you point below:
https://patchwork.ozlabs.org/patch/479743/
I am not sure yet if there was a problem with my submission. I intended
for it to go into 4.1.
Thanks,
Roopa
On 6/26/15, 1:06 PM, Stephen Hemminger wrote:
> Update to iproute2 for 4.1
>
> 4.1 is released and this is the corresponding iproute2.
> Noteable features:
> * new command for controlling TIPC
> * BPF support in tc
> * Lots of RED cleanup work
> * Enhancements to ss
> * color option to ip command
>
> Source:
> http://www.kernel.org/pub/linux/utils/net/iproute2/iproute2-4.1.0.tar.gz
>
> Repository:
> git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/iproute2.git
>
> Report problems (or enhancements) to the netdev@vger.kernel.org mailing list.
>
> Sorry for the delay, Linus and I don't coordinate vacations.
>
> ---
> Andy Gospodarek (1):
> iproute2: unify naming for entries offloaded to hardware
>
> Christophe Gouault (2):
> xfrm: add command for configuring SPD hash table
> xfrm: revise man page and document ip xfrm policy set
>
> Daniel Borkmann (9):
> misc: header rebase, add bpf.h
> tc: add eBPF support to f_bpf
> tc, bpf: finalize eBPF support for cls and act front-end
> tc: built-in eBPF exec proxy
> examples: bpf: fix ld offs to have same prog loaded on ingress/egress
> tc: {m, f}_ebpf: add option for dumping verifier log
> tc: minor cleanup on ingress
> tc: util: fix print_rate for ludicrous speeds
> tc: bpf: add initial man page
>
> David Ward (9):
> tc: red, gred: Rename overloaded variable wlog
> tc: red, gred: Fix format specifier in burst size warning
> tc: red, gred: Notify when using the default value for "bandwidth"
> tc: red: Mark "bandwidth" parameter as optional in usage text
> tc: gred: Fix whitespace issues in code
> tc: gred: Print usage text if no arguments appear after "gred"
> tc: gred: Improve parameter/statistics output
> tc: gred: Handle unsigned values properly in option parsing/printing
> tc: gred: Adopt the term VQ in the command syntax and output
>
> Eric Dumazet (5):
> ss: small optim in tcp_show_info()
> ss: dctcp changes
> ss: Fix allocation of cong control alg name
> ss: speedup resolve_service()
> ss: do not bindly dump two families
>
> Eric W. Biederman (8):
> add a source addres length parameter to rt_addr_n2a
> make the addr argument of ll_addr_n2a const
> add support for printing AF_PACKET addresses
> add address family to/from string helper functions.
> misc whitespace cleanup
> add support for the RTA_VIA attribute
> add support for the RTA_NEWDST attribute.
> add basic mpls support to iproute
>
> Felix Fietkau (1):
> tc: add support for connmark action
>
> Jetchko Jekov (1):
> gre: raising the size of the buffer holding nl messages.
>
> Lennert Buytenhek (1):
> man ip-link: Add missing lowpan link type
>
> Lubomir Rintel (1):
> ip: support RFC4191 router preference
>
> Maciej Żenczykowski (2):
> iproute2: tc/m_pedit.c - remove dead code
> iproute2: misc/ss.c - fix run_ssfilter af_packet when protocol == 0
>
> Madhu Challa (1):
> ip: enable configuring multicast group autojoin
>
> Mathias Nyman (1):
> ip: Add color output option
>
> Mazhar Rana (1):
> mroute: "ip mroute show" not working when "to" and/or "from" is given
>
> Mike Frysinger (1):
> enable transparent LFS
>
> Nicolas Dichtel (5):
> netns: allow to dump and monitor nsid
> ipxfrm: wrong nl msg sent on deleteall cmd
> tc: fix compilation warning on 32bits arch
> libnamespaces: fix warning about syscall()
> mroute: remove invalid check against NLM_F_MULTI
>
> Pavel Šimerda (5):
> turn Makefile more distribution friendly
> ip-xfrm: support 'proto any' with 'sport' and 'dport'
> cbq: fix find syntax in example
> lnstat: run indefinitely by default
> lnstat: dump to stdout, not stderr
>
> Richard Alpe (1):
> tipc: add new TIPC configuration tool
>
> Scott Feldman (1):
> route: label externally offloaded routes
>
> Stephen Hemminger (16):
> update headers files for net-next
> update kernel headers to net-next 4.0-rc5
> xfrm: fix build with later kernel headers
> update kernel headers for net-next
> fix whitespace
> update kernel headers and add tc_connmark.h
> update headers to reflect BPF changes
> ip: document exit code
> ip: return correct exit code on route failure
> ip: fix exit code for rule failures
> ip: fix exit code for addrlabel
> Update to latest kernel headers
> libnetlink: add size argument to rtnl_talk
> update to 4.1-rc5 headers
> change of rtnetlink to use RTN_F_OFFLOAD
> v4.1.0
>
> Thadeu Lima de Souza Cascardo (1):
> Fix changing tunnel remote and local address to any
>
> Thomas Graf (2):
> iproute2: Fix typo in get_prefix_1()
> route: Add missing newline in helptext
>
> Vadim Kochan (10):
> tc util: Fix possible buffer overflow when print class id
> ss: Fix wrong filter behaviour
> man ip-link: Add deleting links by group
> ip link: Add group in usage() for 'ip link delete'
> man ip-link: Remove extra GROUP explanation
> tests: Run each test in network namespace
> tests: Add test for 'ip route add default'
> ss: Show more info (ring,fanout) for packet socks
> configure: Check for libmnl
> tests: Add output testing
>
> Vlad Zolotarov (1):
> ip link set vf: Added "query_rss" command
>
> WANG Cong (1):
> tc: fill in handle before checking argc
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-06-26 21:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-26 20:06 [ANNOUNCE] iproute2 4.1.0 Stephen Hemminger
2015-06-26 21:49 ` roopa [this message]
2015-06-26 22:33 ` Stephen Hemminger
2015-06-26 22:35 ` roopa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=558DC8D7.4080803@cumulusnetworks.com \
--to=roopa@cumulusnetworks.com \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.