diff for duplicates of <558F500C.6040004@gmail.com> diff --git a/a/1.txt b/N1/1.txt index 7a2568e..9d06570 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,8 +1,8 @@ -Le 06/27/15 15:08, Rafa? Mi?ecki a ?crit : -> On 24 June 2015 at 01:51, Florian Fainelli <f.fainelli@gmail.com> wrote: +Le 06/27/15 15:08, Rafał Miłecki a écrit : +> On 24 June 2015 at 01:51, Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: >> Enable the use of UART0 by overriding its default status property. >> ->> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> +>> Signed-off-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> >> --- >> arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ++++ >> 1 file changed, 4 insertions(+) @@ -27,7 +27,7 @@ Le 06/27/15 15:08, Rafa? Mi?ecki a ?crit : > move it to the "correct" place at some point. Since UART is part of > ChipCommon device and ChipCommon is part of "brcm,bus-axi",.I guess we > should add UARTs as a ChipCommon device subnodes. We already have -> chipcommon: chipcommon at 0 { +> chipcommon: chipcommon@0 { > reg = <0x00000000 0x1000>; > > gpio-controller; @@ -46,7 +46,7 @@ I do not think it will, see below: > &uart0 { }; > and > chipcommonA { -> uart0: serial at 0300 { }; +> uart0: serial@0300 { }; > }; > ? I don't know DT that well, just asking. @@ -71,3 +71,7 @@ this is the route to take. Thanks! -- Florian +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 660bd52..5071030 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,16 +1,21 @@ "ref\01435103504-28592-1-git-send-email-f.fainelli@gmail.com\0" "ref\0CACna6rzJE8Gzrwvj+nCw=qCRho=6nZ+k1h_tFQLhNZvf5zWTDg@mail.gmail.com\0" - "From\0f.fainelli@gmail.com (Florian Fainelli)\0" - "Subject\0[PATCH] ARM: BCM5301X: Enable UART0 for SmartRG SR-400AC\0" + "ref\0CACna6rzJE8Gzrwvj+nCw=qCRho=6nZ+k1h_tFQLhNZvf5zWTDg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org\0" + "From\0Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Subject\0Re: [PATCH] ARM: BCM5301X: Enable UART0 for SmartRG SR-400AC\0" "Date\0Sat, 27 Jun 2015 18:38:20 -0700\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Rafa\305\202 Mi\305\202ecki <zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Cc\0linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>" + Hauke Mehrtens <hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org> + bcm-kernel-feedback-list <bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> + " devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>\0" "\00:1\0" "b\0" - "Le 06/27/15 15:08, Rafa? Mi?ecki a ?crit :\n" - "> On 24 June 2015 at 01:51, Florian Fainelli <f.fainelli@gmail.com> wrote:\n" + "Le 06/27/15 15:08, Rafa\305\202 Mi\305\202ecki a \303\251crit :\n" + "> On 24 June 2015 at 01:51, Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:\n" ">> Enable the use of UART0 by overriding its default status property.\n" ">>\n" - ">> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>\n" + ">> Signed-off-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" ">> ---\n" ">> arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ++++\n" ">> 1 file changed, 4 insertions(+)\n" @@ -35,7 +40,7 @@ "> move it to the \"correct\" place at some point. Since UART is part of\n" "> ChipCommon device and ChipCommon is part of \"brcm,bus-axi\",.I guess we\n" "> should add UARTs as a ChipCommon device subnodes. We already have\n" - "> chipcommon: chipcommon at 0 {\n" + "> chipcommon: chipcommon@0 {\n" "> reg = <0x00000000 0x1000>;\n" "> \n" "> gpio-controller;\n" @@ -54,7 +59,7 @@ "> &uart0 { };\n" "> and\n" "> chipcommonA {\n" - "> uart0: serial at 0300 { };\n" + "> uart0: serial@0300 { };\n" "> };\n" "> ? I don't know DT that well, just asking.\n" "\n" @@ -78,6 +83,10 @@ "\n" "Thanks!\n" "--\n" - Florian + "Florian\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -bd5c956b1d485f6a585bd8cf209ebbe6f058a9c458c08629057c4aa159fc9e4c +c45ba8c76b9f1a33d8defc0fecc90846fbea3228c938f3ea6ada2b2977f01b6a
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.