From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Mon, 29 Jun 2015 14:46:58 +0200 Subject: [PATCH 1/3] ARM: mvebu: fix description of pwr-sata0 regulator on Armada 388 GP In-Reply-To: <1434631121-32014-2-git-send-email-thomas.petazzoni@free-electrons.com> References: <1434631121-32014-1-git-send-email-thomas.petazzoni@free-electrons.com> <1434631121-32014-2-git-send-email-thomas.petazzoni@free-electrons.com> Message-ID: <55913E42.3070102@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Thomas, On 18/06/2015 14:38, Thomas Petazzoni wrote: > This regulator was lacking the reference to the GPIO that controls it, > and the regulator-min-microvolt and regulator-max-microvolt > properties. Thanks to this commit, the pwr-sata0 regulator now looks > more like the other pwr-sata{1,2,3} regulators in the same Device > Tree, with of course the exception of a different GPIO reference. > > Signed-off-by: Thomas Petazzoni Acked-by: Gregory CLEMENT Thanks, Gregory > --- > arch/arm/boot/dts/armada-388-gp.dts | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts > index 78514ab..5164b9a 100644 > --- a/arch/arm/boot/dts/armada-388-gp.dts > +++ b/arch/arm/boot/dts/armada-388-gp.dts > @@ -301,9 +301,11 @@ > reg_sata0: pwr-sata0 { > compatible = "regulator-fixed"; > regulator-name = "pwr_en_sata0"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > enable-active-high; > regulator-always-on; > - > + gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; > }; > > reg_5v_sata0: v5-sata0 { > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com