ANQP to second AP while associated to a first.

ANQP to second AP while associated to a first.

[Ben Greear]

In our testing we are trying to do 802.11r roaming with ANQP.

After initial association, we do not see ANQP on the air when trying
to roam to a new AP.

I think the problem might be that the firmware has issues sending
packets to a second AP when we are already associated to a first.

I am curious if anyone has successfully tested any sort of
.11r roaming with ath10k?

And, I am curious if anyone knows if or how ath10k can send
to a second AP while connected to a different AP  (Like creating a peer for the new
AP, perhaps???)

Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ANQP to second AP while associated to a first.

[Janusz Dziedzic]

On 30 June 2015 at 17:20, Ben Greear <greearb@candelatech.com> wrote:
> In our testing we are trying to do 802.11r roaming with ANQP.
>
> After initial association, we do not see ANQP on the air when trying
> to roam to a new AP.
>
> I think the problem might be that the firmware has issues sending
> packets to a second AP when we are already associated to a first.
>
> I am curious if anyone has successfully tested any sort of
> .11r roaming with ath10k?
>
> And, I am curious if anyone knows if or how ath10k can send
> to a second AP while connected to a different AP  (Like creating a peer for
> the new
> AP, perhaps???)
>
offchannel code - send/receive frames on different channel. I think
you should be able to receive all action frames.

BR
Janusz

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k